红粘土地区水泥土强度的试验研究

红粘土是亚热带气候条件下形成的一种特殊土质。含有红粘土的地基多具有上硬下软的特点,下部红粘土为天然地基软弱下卧层。采用深层搅拌法处理,可充分发挥上部硬塑红粘土的作用,形成复合地基。通过试验得到了水泥红粘土的基本力学参数。在对试验结果进行回归分析后,给出了水泥土强度的影响因素及其与强度的关系,以及不同水泥掺量、龄期水泥土之间的强度推算公式。     

Stabilization of Expansive Clays Using Granulated Blast Furnace Slag (GBFS) and GBFS-Cement

Expansive clays undergo swelling when subjected to water. This can cause damage, especially to light weight structures, water conveyance canals, lined reservoirs, highways, and airport runways unless appropriate measures are taken. In this study, granulated blast furnace slag (GBFS) and GBFS-cement (GBFSC) were utilized to overcome or to limit the expansion of an artificially prepared expansive soil sample (sample A). GBFS and GBFSC were added to sample A in proportions of 5–25% by weight. The effects of these stabilizers on grain size distribution, Atterberg limits, swelling percentage and rate of swell of soil samples were determined. GBFS and GBFSC were shown to successfully decreasing the total amount of swell while increasing the rate of swell.     

乳腺炎症及增生症病灶中钙化的矿物学研究

选取9例乳腺炎症、7例乳腺增生的钙化样品,利用光学显微镜(OM)、环境扫描电镜(ESEM)、微区X射线衍射(μ-XRD)等矿物学分析方法对样品进行了原位形貌观察、分离后结构及成分的测试分析,探讨了病灶中钙化的矿物学特征及其组成成分和形成机制。研究结果表明,发生在炎症病灶中的钙化主要类型是脂肪坏死后的钙化,其发生和死亡的脂肪细胞和周围病变后期修复性Ⅲ型胶原有直接关系。增生症中的钙化主要有发生在扩张的导管内和在束状深度交联胶原中的坏死型钙化,扩张的导管边缘处Ⅳ型胶原和大片变性Ⅲ型胶原为钙化提供了成核位点,继而参与无机矿物的形成过程,最后形成较为致密的钙化。乳腺炎症和增生症中的钙化的主要成分均为碳羟磷灰石。     

便携式钻机在水泥灰岩矿勘查中的应用

便携式钻机已广泛应用于地质与工程勘查中,为了进一步扩大便携式钻机的应用范围,倡导绿色勘查,在湖南省东安县王师岭矿区水泥灰岩矿勘查中,采用ZY-25型便携式钻机以钻代槽进行地表取样,取得了较好的效果。应用实践表明,当矿区构造简单,岩层产状较平缓且稳定,矿体厚度较大,矿石有用组分含量较高且分布均匀,有害组分含量较低时,采用便携式钻机取样代替槽探取样评价矿床是可行的。     

Nouvelles données sur le téphra de Sarliève et le téphra CF7, marqueurs chrono-stratigraphiques de Grande Limagne (Massif central,France)

A trachytic tephra, discovered in the ancient lake of Sarliève, ‘Grande Limagne’, has been dated using the thermoluminescence technique. The obtained age, 16±4 ka ($\text{2}\text{σ}$), is older than that of the trachytic volcanoes of the Cha??ne des Puys, the ashes of which have already been locally recognised in the region. Its analysis confirms its originality. In the course of the comparisons made to search for its spring, it appears that the wide-dispersion tephra CF7, beforehand correlated by hypothesis to the Puy de Clierzou, probably originates from the Kilian crater or the Puy de Vasset. To cite this article: D. Miallier et al., C. R. Geoscience 336 (2004).     

水泥混凝土路面病害成因分析及处治方法

水泥混凝土路面使用寿命的长短,除取决于施工质质量外,在很大程度上取决于养护质量。水泥混凝土路面破损一旦发生．破损状况将迅速发展,对行车的舒适性和道路顺畅造成严重影响,养护难度也相应加大。通过六安境内某段一级公路水泥混凝土路面的病害调查,对其形式和成因进行分析,在公路养护中提出了处治病害的具体措施。     

Characteristics of magnetic and non-magnetic lag in the Cobar area, NSW

Geochemical patterns from two lag anomalies in the Cobar region of central New South Wales are described. The region is semi-arid, deeply weathered and some areas are covered by variable thicknesses of aeolian and alluvial transported overburden.Lag morphology and mineralogy are related to landform. In erosional landforms the surface is covered by lag, which is composed of coarse fragments derived locally from bedrock and displays varying degrees of ferruginization, together with a range of secondary pisoids. In depositional landforms the lag is less abundant and contains more pisoids. Deflation by sheetwash may lead to lag being partially buried by alluvium. In a large proportion of pisoid lag, hematite and goethite have been converted to maghemite, allowing ready separation into magnetic and non-magnetic fractions. The non-magnetic fraction is dominated by the lithic lag whereas the magnetic fraction is dominated by pisoid lag.The magnetic and non-magnetic components of the 2–11 mm lag fraction, milled to < 75 μm and subjected to HF-HNO₃-HClO₄ attack, give rise to distinct geochemical patterns at targets related to a variant of the Cobar style of Pb-Zn mineralization with variable silicification and to Zn mineralization in a swarm of quartz and carbonate veinlets. The patterns are influenced by metal source, lag type, surface chemical conditions and landtbrm. Differences in the correlation between metal contents in the magnetic and non-magnetic lag components, and between trace elements and Fe. indicate variable loss of Cu and Zn from the magnetic lag at some targets but retention of Pb. The presence of a readily cxtractable base metal component in the lag has implications for detecting anomalies in transported cover in the region.     

东峰顶金矿某些成矿特征及其找矿意义

东峰顶金矿受断裂硫碎带控制，矿石中主要矿物成分有石英，黄铁矿，重晶石及褐铁矿，其标型特征具有成因和找矿意义，成矿流体为中低温、低盐度，弱酸性，低氧逸度和硫逸度，成矿物质主要来源于基底太古界变质岩系，表生作用使金的品位，成色获得大幅度提高。     

塔河3号油田石炭系储层孔隙特征及其影响因素

通过对新疆塔河３号油田石炭系储层的压汞、铸体、电镜扫描、孔渗资料进行综合分析认为,该储层的孔隙总体不是很好。储层共分为四类,最好的也只是中孔－中渗－粗喉型。其孔隙较小、喉道连通性较好、喉道分选差、毛管压力无明显平台,影响孔隙的因素是碳酸盐胶结物的含量。     

Contrasting mineralogical and processing potential of two mineralization types in the platinum group element and Ni-bearing Kapalagulu Intrusion,western Tanzania

The Kapalagulu layered ultramafic and mafic intrusion is emplaced between the Paleoproterozoic Ubendian basement and overlying Neoproterozoic Itiaso Group metasedimentary rocks, located near the western shore of Lake Tanganyika. High-grade platinum group element (PGE) mineralization (1–6 g/t Pt + Pd + Au) is associated with chromitite and sulfide-bearing harzburgite within the southeastern extension of the intrusion, known as the Lubalisi Zone, which is covered by a layer of nickel-rich (0.2–2%Ni) laterite regolith that contains linear areas of PGE mineralization.In the Lubalisi Zone, the mineralization may be divided into several significant geometallurgical domains: (a) high-grade PGE mineralization (1–6 g/t Pt + Pd + Au) associated with stratiform PGE reefs and chromitite seams within a harzburgite unit; (b) high-grade PGE mineralization (up to 12 g/t Pt + Pd + Au) associated with small bodies and veins of nickel massive sulfide within harzburgite below PGE-bearing reefs and chromitite seams; (c) low-grade PGE mineralization (0.1–0.5 g/t Pt + Pd + Au) associated with a sulfide-mineralized harzburgite unit above the PGE-bearing reefs; (d) laterite style residual PGE mineralization (0.2–4 g/t Pt + Pd + Au) associated with chromite concentrations in the saprolite and overlying red clay horizons of the laterite regolith; and (e) supergene Ni associated with the saprock and overlying saprolite clay.Mineralogical study of three samples from the PGE reef consisting of high grade PGE chromitite and harzburgite indicate that this mineralization will give a good metallurgical response to conventional grinding and floatation due to the relatively coarse-grained nature of the PGM (P80 from ∼37 to 52 µm), association with base metal sulfides, and unaltered gangue minerals (Wilhelmij and Cabri, 2016). In contrast, mineralogical and metallurgical study of the Ni and PGE mineralized laterite indicate that it cannot be processed using conventional mineral processing techniques but that a hydrometallurgical route should be used to recover the base and precious metals. Because any process is very much deposit-controlled, significant metallurgical and geometallurgical testing of mineralized samples, as well as pilot plant testing, will be required to arrive at feasibility studies.