Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

一维扩散方程整体观测资料下的初值变分同化反演

本文考虑一维扩散方程的反问题,利用变分同化方法通过观测资料来确定方程中的未知初值,通过分析观测误差对于初值误差的影响,证明变分同化初值收敛于原问题的真实参数,并得到了参数的收敛精度。同时将得到的初值代入预报模式中,得到预报解,并分析了预报解的收敛性和预报误差。     

利用p~3软件进行GPS单点定位解算的若干问题

利用p3软件对大量实测数据进行了高精度单点定位有关问题的验证和分析;在IGS提供的精密星历和卫星钟差产品中,较为深入地比较分析了快速产品和几种最终产品的定位精度、收敛速度及p3软件的正反算结果精度。得出以下结论:快速产品与最终产品的定位精度和收敛速度相似;COD的收敛速度和定位精度最高;p3软件的反算精度明显优于正算,且精度也比较均匀。这些研究成果对PPP技术的实际应用具有较好的借鉴意义。     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

勘查油气田化探新方法——土壤相态烃测量法

烃气测量是油气化探最主要的方法。目前应用的烃气测量方法有两类:一类是测量土壤中游离烃气如K—V指纹法、吸附丝法、物上气法及直接取土壤气测量法等。此类方法由于需特殊设备及壤气测量方法本身固有的缺陷,目前还未得到普遍应用,另一类为土壤吸附烃气法即国内外目前普遍使用的酸解烃气法、此法在多数油气田上取得好效果,但也有相当多的地区如黄土、荒漠及水网发育等特殊景观区效果不好或不显著。本文介绍一种新的烃气测量法──土壤相态烃测量法。这是用一种特殊的技术,只选择性提取由油气藏渗漏过程中保存在运移通道围岩及近地表土壤各种次生矿物结构中以"穴居"态存在的轻烃组分。"穴居"态烃为累积性的指标,不受外界温度、修水等的影响,保存较牢固,测定结果稳定。相态烃法避免了酸解烃法存在的生物成因烃、矿物同生烃及碳酸盐的干扰影响,提高了测量指标的信噪比,突出了应有的异常。本方法已在黄土厚覆盖区两个已知油气田和一个风成沙覆盖的断裂发育油田上试验获得成功,结果表明相态烃法优于酸解烃法。     

半无限空间中圆形孔洞周围SH波的散射

建立了求解在含有圆形孔洞的弹性半空间中SH波散射与圆形孔洞附近动应力集中问题的解析方法。利用SH波散射的对称性和多极坐标的方法，构造了一个可以预先满足半空间自由表面上应力自由边界条件的圆形孔洞对SH波散射的波函数。利用这一波函数，则可将该问题转化成对一个圆形孔洞散射的求解问题。该问题的解答最终又可归结为对一组无究代数方程组的求解问题，并可利用截断有限项的方法对其进行计算，最后给出了有关圆形也洞附近动应力集中问题的算例和数值结果，并讨论了波数与圆孔至自由边界距离变化对动应力集中的影响。     

空腔结构复合填充墙-钢框架抗侧力性能试验研究

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。     

GPS RTK测量技术的应用与体会

GPS RTK测量技术以快捷、精准的特点广泛地被测量人员所接受，但是在到量中仍存在一些问题需要研究。本文介绍了几种经常遇到的棘手问题及其解决方法。     

宜兴抽水蓄能电站试验洞的反分析研究

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。     

Seismic moment tensor representations and radiation patterns in unbounded media with elipsoidal cavities driven by low frequency pressure

ＳｅｉｓｍｉｃｍｏｍｅｎｔｔｅｎｓｏｒｒｅｐｒｅｓｅｎｔａｔｉｏｎｓａｎｄｒａｄｉａｔｉｏｎｐａｔｅｒｎｓｉｎｕｎｂｏｕｎｄｅｄｍｅｄｉａｗｉｔｈｅｌｉｐｓｏｉｄａｌｃａｖｉｔｉｅｓｄｒｉｖｅｎｂｙｌｏｗｆｒｅｑｕｅｎｃｙｐｒｅｓｓｕｒｅＰＩ...