Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.     

Variation in the composition of Lake Bonneville marl: a potential key to lake-level fluctuations and paleoclimate

Lake Bonneville marl provides a stratigraphic record of lake history preserved in its carbonate minerals and stable isotopes. We have analyzed the marl in shallow cores taken at three localities in the Bonneville basin. Chronology for the cores is provided by dated volcanic ashes, ostracode biostratigraphy, and a distinctive lithologic unit believed to have been deposited during and immediately after the Bonneville Flood.A core taken at Monument Point at the north shore of Great Salt Lake encompasses virtually the entire Bonneville lake cycle, including the 26.5 ka Thiokol basaltic ash at the base and deposits representing the overflowing stage at the Provo shoreline at the top of the core. Two cores from the Old River Bed area near the threshold between the Sevier basin and the Great Salt Lake basin (the main body of Lake Bonneville) represent deposition from the end of the Stansbury oscillation ( 20 ka) to post-Provo time ( 13 ka), and one core from near Sunstone Knoll in the Sevier basin provides a nearly complete record of the period when Lake Bonneville flooded the Sevier basin (20–13 ka).In all cores, percent calcium carbonate, the aragonite to calcite ratio, and percent sand were measured at approximately 2-cm intervals, and ¹⁸O and ¹³C were determined in one core from the Old River Bed area. The transgressive period from about 20 ka to 15 ka is represented in all cores, but the general trends and the details of the records are different, probably as a result of water chemistry and water balance differences between the main body and the Sevier basin because they were fed by different rivers and had different hypsometries. The Old River Bed marl sections are intermediate in position and composition between the Monument Point and Sunstone Knoll sections. Variations in marl composition at the Old River Bed, which are correlated with lake-level changes, were probably caused by changes in the relative proportions of water from the two basins, which were caused by shifts in water balance in the lake.This is the second paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

“Tripoli”的含义及译名的讨论

“Tripoli”是一种新型的石英质工业矿物原料,在我国长期被误译为硅藻土,影响地质部门对这一新矿种的认识和寻找。本文追溯了“Tripoli”一名的由来,正确地阐述了“Tripoli”的本质特征,分析了在国内文献中长期被误译的根源,指明了其正确含义,并建议废除各种不正确的中译名,译为“粉石英”。     

Experimental investigation of the elastic modulus of a fractal system—A model of fractured rocks

The elastic properties of a physical model representing a damaged rock matrix were studied using a square lattice deformed under tensile stress. The elastic modulusM of such a system varies in agreement with percolation theory as|x–x _c | ^f , wherex is the damage parameter andx _c the threshold value of the damage parameter,f3.6. Atxx _c the scale dependence ofM can be expressed asML ^–f/v , whereL is the size of the sample andv the correlation exponent in percolation theory.The experimental results are of interest in assessing elastic properties in earthquake focal zones and fault zones in general.     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

Form, function and feedbacks in a tidally dominated ooid shoal, Bahamas

Although the general aspects of oolitic depositional systems are well documented, seascape‐scale (≈10³–10⁶ m²) patterns of oolitic shoals and the details of processes acting on them are not well understood or quantified. To begin to fill this basic gap in understanding, this paper describes the morphology and hydrodynamics of Lily Bank, a Modern tidally dominated Bahamian ooid shoal. In this study, integrating remote sensing imagery with quantitative, geo‐located bathymetrical, hydrological and granulometric data in a Geographic Information System documents geomorphic and sedimentological patterns and facilitates interpreting these patterns in the context of the processes operating in this system. The results of these analyses reveal that parabolic bars up to several kilometres in wavelength and several metres in height form a common morphologic motif, although there is considerable variation on that general theme. The seascape‐scale configuration of bars and superimposed sedimentary structures is closely linked to spatial patterns of tidal movements, and includes the presence of mutually evasive flood and ebb channels. Sedimentologically, bars are neither homogenous nor random bodies; instead, granulometric parameters such as sorting and percentage mud vary systematically, as shaped by hydro‐geomorphic controls. The best sorted, coarsest ooids are on bar crests, whereas the finest grains are found in the lower energy, deeper interior and flanking regions. In short, results clearly document hydrodynamic‐bathymetrical influences on these ooid shoals and their granulometry, linkages akin to siliciclastic analogues. Sedimentological, hydrodynamic and geomorphic observations are consistent with a conceptual model for the formation of parabolic bars in which initial irregularities in non‐parabolic bars are enhanced through their effect of focusing flow. Constricted flow leads to higher flow velocities, tidal flow velocity asymmetries, differential net sediment transport and growth of bathymetrical highs. This bathymetrical divergence creates separate paths for flood‐ and ebb‐tides, facilitating emergence of better‐developed parabolic forms. The resultant parabolic geometries and component bedforms appear to be either in dynamic equilibrium with both ebb‐ and flood‐tide flows, or evolving toward that state. In exploring patterns and processes within carbonate shoals, this study illustrates some of the first documented insights on quantitative details of morphology and dynamics and in the links between geomorphic framework and grain‐size and sorting in an oolitic carbonate system. Assuming a continuity of processes between ancient and modern, the insights from this shoal provide information on possible facies geometries and on the characteristics of grains and depositional porosity of analogous facies within ancient ooid shoals.     

冲击凿岩钎杆的瞬态动力学分析

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。     

PDC钻头切削齿破岩载荷规律的分析

对PDC钻头冠部形状及不同的布齿密度和切削齿在不同的磨损状态下对PDC钻头切削齿受力的影响进行了分析；用相邻的3个切削齿之间的关系(不同的切削齿与切削齿之间的径向距离和切削齿之间的高度差)来分析PDC钻头冠部形状和切削齿布齿密度对切削齿受力的影响，以及将切削齿的磨损状态简化成与切削齿在钻头上装配方向垂直的平面来分析切削齿磨损状态对切削齿受力的影响。     

双坡面临空岩质边坡滑动破坏模式下的稳定性分析

多数岩质边坡稳定性分析已基本解决了常走向单坡面临空的边坡平面滑动问题。然而,在路堑边坡工程和自然边坡中有很多边坡坡面并不是平面,它包含多个坡面。多坡面边坡包含两个或多个不同走向的坡面。多坡面边坡几何特征不同于单坡面边坡,所以滑动条件也不一样。在赤平投影图上,多坡面的滑动包络线是组成边坡的每个坡面单独投影包络线的组合。为了探讨方便,只讨论了双坡面临空岩质边坡的滑动破坏模式,并将其分为双坡面临空下的平面破坏和楔形体破坏。在赤平投影图上,双坡面滑动区域定义为双坡面边坡滑动包络图中两侧坡面的真倾线之间的面积。如果有一两个节理面真倾向线落在滑动区内,滑动破坏才可能发生。     

Attenuation of aqueous metal transport at two natural acid rock drainage occurrences in the Yukon Territory, Canada

Naturally acidic drainage associated with pyritic black shale has been observed in many locations in the Yukon Territory. While not necessarily linked to known mineral deposits, most of these natural acid rock drainage occurrences show elevated dissolved concentrations of trace elements, especially zinc, nickel, copper, cadmium and arsenic. Based on field observations, microbial investigation, chemical analyses and geochemical modeling, the fate and transport of potentially deleterious elements at two natural acid drainage occurrences with slightly different settings are examined. The Macintosh Creek is a small, acidic stream （pH 2.98-3.40）, 2 km long, located in the Macmillan Pass area of east-central Yukon amidst known sedimentary exhalative massive sulfide mineralization but remains undisturbed by exploration activities. Its trace metal content is apparently derived from groundwater discharges, which gave as much as 5.0, 2.5, 0.7, 0.13 and 0.03 mg/L ofZn, Ni, Cu and As, respectively. Interaction and sorption reactions with algal mats, biofilms and iron oxyhydroxides appear to be the dominant mechanisms attenuating aqueous contaminant transport along the stream. Cryogenic precipitation further consolidates the ferricrete formation and reduces the mobility of the sorbed metals. The tributaries of the Engineering Creek along the Dempster Highway in northern Yukon drain through a series of dolomite, phyllite, argillite, limestone, black shale, sandstone and conglomerate with no known concentration of mineralization. In this area, the water chemistry fully reflects the local geology with acidic streams invariably associated with black shale occurrences. Groundwater seeps in the headwaters area of the km-180 Creek completely enclosed in black shale gave pH 3.0 and as much as 148, 39, 2.9 and 9.1 mg/L of Zn, Ni, Cu and As, respectively. Sorption with iron oxyhydroxide and organic matter appear to dominate the attenuation of contaminant transport along the stream. However, once entered into carbonate-dominated terrains, secondary carbonate minerals exercise additional geochemical control on the local water chemistry as a result of neutralization.