泥浆脉冲随钻测量系统研究

介绍了泥浆脉冲随钻测量系统信号传输的3种基本工作方式:压力正脉冲、压力负脉冲和连续压力波.泥浆脉冲信号在传输过程中主要受钻探泵、井底动力机、泥浆中的气泡及活动钻具的干扰;钻井深度、泥浆中的气泡量、含砂量和泥浆类型对信号衰减有一定的影响.     

河南嵩山地区新元古界何家窑组微亮晶脉特征、成因及地质意义探讨

在河南嵩山地区青白口系何家窑组中可识别出一个碳酸盐岩微亮晶脉集中的层位，笔者等结合微亮晶脉自身的特征、成分和伴生的地震引起的其他变形特征，以及通过显微镜和核磁共聚焦显微镜下的微相研究，认为嵩山地区板状微亮晶脉与华北块体东缘胶辽徐淮地区的泥晶脉特征一致，是由地震液化形成的产物，该层位代表了一个地震活跃期。同处华北块体南缘的豫西鲁山和陕西南部相对应的青白口系层位（洛峪口组和巡检司组）也发现了同期的地震记录。笔者认为嵩山地区微亮晶脉的出现应与华北块体南缘构造事件相关联。     

青藏高原腹地植物碳同位素组成对环境条件的响应

现代植物碳同位素组成是特定环境影响的结果,通过对植物碳同位素组成的研究可以揭示植物生长期环境信息。针对青藏高原腹地高寒草甸~高寒草原过渡区植被碳同位素组成进行研究;该区高山嵩草样δ13C值在-25.63‰~-27.95‰间,平均值-26.63‰;高寒草原区混合样δ13C值于-26.29‰~-27.73‰间,平均值-27.04‰。高山嵩草样δ13C值总体呈现由南东往北西方向正偏趋势,研究区北部高寒草原区混合植物样也呈现出由南向北富重碳同位素趋势。这些变化规律被认为是主要受降水环境影响的结果,而区域内降水条件的展布规律则是受高原夏季风运移方式的控制。对植物δ13C值与地理位置的回归分析表明,该区植被碳同位素组成与地理位置相关,高山嵩草样(r=0.44603,n=29,p<0.05)和混合样(r=0.8112,n=5,p<0.1)均表现出对区域降水环境条件的良好响应。据此,以该区植物δ13C值为背景,进行合理推算,拟定了研究区内干旱区和湿润区界限的位置。     

GEOPHYSICAL EXPLORATION

正20141074Bao Xijie(Research Institute of Exploration and Development,Daqing Oilfield Company,PetroChina,Daqing 163712,China)Gather Optimal Processing and Application Effect of Prestack AVA Instantaneous Inversion     

Dissolved inorganic carbon evolution in neutral discharge from mine tailings piles

We measured the concentrations of dissolved inorganic carbon (DIC) and major ions and the stable carbon isotope ratios of DIC (δ¹³C_DIC) in two creeks discharging from carbonate‐rich sulphide‐containing mine tailings piles. Our aim was to assess downstream carbon evolution of the tailings discharge as it interacted with the atmosphere. The discharge had pH of 6.5–8.1 and was saturated with respect to carbonates. Over the reach of one creek, the DIC concentrations decreased by 1.1 mmol C/l and δ¹³C_DIC increased by ~4.0‰ 200 m from the seep source. The decrease in the DIC concentrations was concomitant with decreases in the partial pressure of CO_2(aq) because of the loss of excess CO_2(aq) from the discharge. The corresponding enrichment in the δ¹³C_DIC is because of kinetic isotope fractionation accompanying the loss of CO_2(g). Over the reach of the other creek, there was no significant decrease in the DIC concentrations or notable changes in the δ¹³C_DIC. The insignificant change in the DIC concentrations and the δ¹³C_DIC is because the first water sample was collected 160 m away from the discharge seep, not accessible during this research. In this case, most of the excess CO_2(aq) was lost before our first sampling station. Our results indicate that neutral discharges from tailings piles quickly lose excess CO_2(aq) to the atmosphere and the DIC becomes enrich in ¹³C. We suggest that a significant amount of carbon cycling in neutral discharges from tailings piles occur close to the locations where the discharge seeps to the surface. Copyright © 2015 John Wiley & Sons, Ltd.     

Complex hydraulic interactions between compartmentalized carbonate aquifers and heterogeneous siliciclastic successions: a case study in southern Italy

The sedimentary sequences containing lithologic units with low permeability represent hydrogeologic systems, which, as of now, have been little studied despite their diffusion worldwide. A hydrogeologic study, aimed to assess the main factors controlling the groundwater flow dynamics in such systems and their hydraulic interactions with nearby carbonate aquifers, has been carried out in Longano (Isernia, Southern Italy). The analysis of the hydraulic heads, combined with the regimes of the springs and the electric conductivity of the groundwater, mainly reflect vertical and lateral heterogeneities of the media in terms of hydraulic properties. In particular, the flow system is controlled by lateral heterogeneities, which characterize a surficial horizon made up of clayey colluviums and talus deposits, separated from the deeper saturated, fissured bedrock. One‐to‐ten relationships in hydraulic heads, monitored in piezometers crossing the fissured media, further uphold the crucial role played by the lateral contrasts of permeability in controlling the flow dynamics. On the whole, significant interactions with the nearby carbonate hydrostructure take place. Nevertheless, the heterogeneities of the siliciclastic succession and surficial horizon, coupled with the compartmentalization of the carbonate system, lead to a complex hydrogeological scenario. In a wider perspective, this study gives information of utmost importance in order to improve the implementation of mathematical models and configuration of tapping works within these heterogeneous and complex settings. Copyright © 2015 John Wiley & Sons, Ltd.     

Growth mechanisms and geochemistry of carbonate concretions from the Cambrian Wheeler Formation (Utah,USA)

Carbonate concretions provide unique records of ancient biogeochemical processes in marine sediments. Typically, they form in organic‐rich mudstones, where a significant fraction of the bicarbonate required for carbonate precipitation is supplied from the decomposition of organic matter in the sediments. As a result, carbonates that comprise concretions are usually characterized by broad ranges in δ¹³C and include values that are significantly depleted relative to seawater. This article reports results from a physical, petrographic and geochemical analysis of 238 concretions from the Wheeler Formation (Cambrian Series 3), Utah, USA, which are unusual in several respects. Most prominently, they formed in organic‐poor mudstones (total organic carbon = 0·1 to 0·5%) and are characterized by a narrow range of δ¹³C that onlaps the range of contemporaneous seawater values. Subtle centre to edge trends in δ¹³C demonstrate that concretion precipitation was initiated by local chemical gradients set up by microbial activity in the sediments, but was sustained during growth by a large pool of inorganic bicarbonate probably derived from alkaline bottom waters. The large inorganic pool appears to have been important in facilitating rapid precipitation of the concretion matrix, which occurred via both displacive and replacive carbonate precipitation during early diagenesis. Stable isotope data from cogenetic pyrite (δ³⁴S) and silica (δ¹⁸O) phases provide insight into the evolution of biogeochemical processes during concretion growth, and suggest that concretions were formed almost entirely during sulphate reduction, with only minor modification thereafter. Concretions of the Wheeler Formation appear to represent an end‐member system of concretion formation in which rapid growth was promoted by ions supplied from sea‐water. As such, they offer insight into the spectrum of processes that may influence the growth of carbonate concretions in marine sediments.     

Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.