凸轮型冲击旋压钻头成孔机理研究

挤密钻头是潜孔锤冲击挤密钻进技术的关键所在,其结构形式直接影响着钻进效率、成孔质量和应用效果。应用非线性有限元理论,对动载荷作用下土体的弹塑性和压缩性的变化规律进行了分析。研究发现,常规钻头在冲击挤密钻进过程中产生的桩效应是导致钻进效率降低的主要原因。为了克服桩效应的影响,利用ANSYS/LSDYNA软件对阶梯式钻头和凸轮旋压钻头的钻进过程进行数值模拟分析,并通过实钻试验进行验证。数值模拟分析和试验结果均表明：凸轮旋压钻头能够有效避免钻进过程中土体回弹问题,降低桩效应对钻进效率的影响。试验结果与模拟结果相吻合,表明数值模拟的结果相对可靠。     

新型热压WC-Fe基金刚石钻头钻进试验

为满足硬岩钻探的需要,将传统的热压碳化钨(WC)基金刚石钻头胎体中一部分WC用Fe代替,用Excel中的回归分析和非线性规划求解计算出的最优胎体配方,试制了新型热压WC-Fe基金刚石钻头,在可钻性为8级以上的岩石上进行了室内、外钻进试验,取得了较好的效果。      

孕镶块式高胎体金刚石钻头的研制

为了提高金刚石钻头的时效和寿命,将钎焊法引入到高胎体金刚石钻头的设计和加工中。首先利用热压法加工耐磨性能好的金刚石孕镶块;然后加工自带两层水口和水槽的新型钻头钢体,且两水口之间预留焊接槽;最后采用钎焊法,将金刚石孕镶块焊接到钻头钢体上。野外试验表明,试制的2只Φ75/54.5 mm高胎体金刚石钻头,与现场使用的孕镶金刚石钻头相比,钻进效率分别提高41.7%和8.3%,使用寿命分别提高50.4%和32.9%。采用二次钎焊法加工的金刚石钻头,兼顾了热压法的优点,解决了工作层高度过高导致钻头胎体折断、掉块的难题,明显提高了金刚石钻头的使用寿命。     

Development of experimental apparatus about reverse circulation bit

A set of experimental apparatus on reverse circulation bit are developed, in order to lucubrate the mechanism of the new type reverse circulation bits, and the structure of the bits influencing the ability of taking core and carrying powder.Both the major structure of the equipment and the procession of experiment are described.     

NP6-1井PDC钻头断落处理与认识

随着PDC钻头的广泛使用,因PDC钻头选型与钻遇地层的不匹配,或PDC钻头本身质量问题,也遇到一些井下复杂情况。此文介绍NP6-1井在311．2mm井段使用PDC钻头钻至井深2878．76m时,PDC钻头从公扣根部折断留在井底,加工公锥和采取适当措施成功地打捞出落鱼,避免侧钻,挽回了经济损失。该井成功打捞出PDC钻头,为同类型的井下落鱼或小落鱼提供参考与借鉴。     

Design of a new bionic diamond bit and its experimental study

Bionics was applied in the design of the impregnated diamond bit. Based on previous research and the 63# bit matrix formula, a new non-smooth bionic impregnated diamond bit with a single circular ring was designed and manufactured, and also tested indoor. The results were satisfactory. During its shape contacted surface system, non-smooth shape display some structure merits such as decreasing resistance. It was obvious that the drilling efficiency of the bionics bit is much higher than that of ordinary’s one, and so does the working life of bionic bit.     

煤矿用锚杆钻头的应用现状与发展趋势

我国是采煤大国,大多数煤矿以井工开采为主,煤矿巷道掘进和支护的工程量很大,巷道支护钻孔施工需要消耗大量锚杆钻头,锚杆钻头的设计和制造技术也得到了快速发展。介绍了锚杆钻头的发展和应用现状,对我国煤矿现用的锚杆钻头的技术特点、适用性进行了分析,并结合煤矿巷道支护的实际需求,提出了施工硬岩和复杂地层时锚杆钻头存在的问题,最后从锚杆钻头设计、加工工艺等方面,阐述了锚杆钻头的发展趋势。     

Air flow calculation of reverse circulation drilling technique with air DTH hammer

Air DTH hammer has been successfully applied in minor-caliber solid mineral exploration,water-well drilling and other drilling areas.In order to expand the applications of the technology,the authors further studied the principle and analyzed the mechanism of reverse circulation drilling technique with air DTH hammer to get the perfect assembles of equipments by optimizing working parameters.No parameter seemed more important than the air volume because it could maintain the working performance stability.The minimum air volume is related to the parameters such as depth and pressure,which was calculated under the actual conditions.It was solved for the air injection flow tables of the air DTH Hammer working at the different pressures.According to the data tables,operators could adjust the air volume to meet the demand on this technique,which had a realistic guiding significance.So it could build up a set of systematic and complete hi-technique.     

自润滑孕镶金刚石钻头胎体材料初步研究

为了研究具有自润滑性能的孕镶金刚石钻头胎体材料,进行了在胎体配方中添加石墨的研究。对胎体材料的抗弯强度、硬度、耐磨性和材料与白刚玉砂轮组成摩擦副时的摩擦系数进行了测定,并用扫描电子显微镜观察了磨损表面形貌。实验结果表明,添加石墨后,胎体材料的硬度和抗弯强度下降,与60目白刚玉砂轮组成摩擦副时的摩擦系数下降,耐磨性则随着石墨含量的增多先增强,后下降（超过6％后）。形貌分析表明,不含石墨的胎体材料在磨损中发生明显的塑性变形;添加石墨后,胎体材料的塑性降低,出现犁沟和剥落现象。     

铵盐镍基电镀金刚石钻头的电化学机理研究及应用

以微机控制电化学分析系统对铵盐镍基胎体镀层的电化学机理进行研究,试验了硫酸镍用量、氯化铵用量、镀液温度和镀液的pH值对镍沉积的影响,结果表明保持镀液适当高的pH值、略低的温度和加入氯化铵,可使镍沉积的极化增大,从而使镀层晶粒变小,结晶致密,且氯化铵的加入没有改变阴极过程的控制步骤。在N iSO4.6H2O 280 g/L,NH4Cl 19 g/L,H3BO335 g/L,十二烷基硫酸钠0.1 g/L;镀液温度45℃±1℃,pH值5.2,电流密度3.6 A/dm^2条件下电镀Φ41/27 mm室内钻头,钻进可钻性Ⅷ级的绢云母化含石英斜长石玢岩,钻进时效平均达到1.94 m/h,钻头的磨损约为0.092 mm/m,与普通镍-钴胎体钻头的使用寿命相差不大;但其钻进时效要比镍-钴胎体钻头高0.18 m/h,即约高10%,为野外生产试验提供了试制钻头的可靠资料和经验。