Grain coarsening in contact metamorphic carbonates: effects of second-phase particles, fluid flow and thermal perturbations

Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature‐induced grain coarsening. Despite this large‐scale trend, a considerable grain size scatter occurs on the outcrop‐scale indicating local influence of second‐order effects such as thermal perturbations, fluid flow and second‐phase particles. Second‐phase particles, whose sizes range from nano‐ to the micron‐scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron‐scale second‐phase particles, or to samples containing a large number of nano‐scale particles. The obtained data set suggests that the second phases induce a temperature‐controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C₂ e^Q*/RT(d_p/f_p)^m*, where C₂ is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio d_p/f_p, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C₂ and Q*. Besides variations in the average grain size, the presence of second‐phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian‐type distributions of the pure samples. In contrast, fluid‐enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ¹⁸O and δ¹³C isotope ratios in fluid‐affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid‐induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second‐order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

Isotopic evidence of TSR origin for natural gas bearing high H_2S contents within the Feixianguan Formation of the northeastern Sichuan Basin, southwestern China

Isotopic evidence of TSR origin for natural gas bearing high H2S contents 1961 As the hazardous component of natural gas, the ex-istence of H2S, due to its extremely strong toxicity and corrosivity, not only decreases the percentage of hy-drocarbon gas within natural gas and reduces its in-dustrial value, it also threatens each aspect of drilling and exploitation. It frequently causes serious safety accidents[1] and leads to the E&P cost and risk of natural gas with higher H2S contents be…     

Rb2Ca[B4O5(OH)4]2·8H2O溶解及相转化过程的研究

利用IR光谱和Raman光谱等实验手段,对25℃时Rb2Ca[B4O5(OH)4]2·8H2O的溶解及相转化过程进行了初步探索,结果表明,Rb2Ca[B4O5(OH)4]2·8H2O溶于水后,硼在溶液中主要以B(OH)3和[B(OH)4]-的形式存在,残留固相由开始的无定形水合三硼酸钙,最终部分转变为Ca2[B3O3(OH)5]2·8H2O晶体。     

海洋钙离子非保守行为及海洋钙问题

钙离子是海洋11种常量离子之一,与钠、钾等离子的保守性不同,钙离子在海洋中的分布表现出微小但系统的变化。钙离子的变化往往与海洋碳酸钙的形成和溶解过程有关,所以,钙离子可直接指示海洋碳酸钙通量（深层海洋碳通量的主要组成部分）。同时,碳酸钙沉淀或溶解又会改变总碱度和溶解无机碳,通过钙离子变化也能间接探讨海洋碳酸盐系统和海洋吸收CO2的能力。介绍了以碳酸钙溶解形成超额钙为主的海洋钙离子多种非保守行为及其控制过程,讨论这些过程对海水组成和海洋碳酸盐系统的影响,探讨未来海洋酸化条件下钙离子可能的变化及其潜在的效应,最后展望在南海开展钙离子精细行为的研究意义。      

淡水珍珠中文石球粒的发现与成珠机制探讨

长期以来,珍珠的成因理论很少涉及在超显微镜结构研究基础上的具体的珍珠形成机制。珍珠与贝壳珍珠层具有较多的相似性,但也存在很多不同。本文在对AFM下首次观察到的淡水珍珠表面纳米级的六方最紧密堆积文石球粒的研究基础上,结合XRD分析对珍珠内部矿物成分差异的研究,试图在贝壳珍珠层成因理论的基础上探讨淡水珍珠的成珠机制。本文将珍珠的形成过程初步归纳为碳酸钙凝胶的形成,碳酸钙球粒的形成,矿物相的转变和后继生长四个阶段。     

萃取富集-火焰原子吸收法测定碳酸钙中铅和镉

将碳酸钙试样用盐酸溶解后,在0.6mol/L的盐酸介质中,用KI-MIBK萃取试样中微量的铅和镉,有机相用原子吸收分光光度法测定。该方法测定铅的相对标准偏差为2.38%-6.31%,回收率为96.5%-97.0%;测定镉的相对标准偏差为4.50%-5.52%,回收率为96%-102.8%。结果可靠,具有灵敏、准确、快速、选择性好等优点。适用于碳酸钙中铅、镉的测定。     

Geotechnical Properties of Low Calcium and High Calcium Fly Ash

In this paper, a comparative study has been made for physical and engineering properties of low calcium and high calcium Indian fly ash. The grain size distribution of fly ash is independent of lime content. Fly ash particles of size >75 μm are mostly irregular in shape whereas finer fractions are spherical for low calcium fly ash. For high calcium fly ash, chemical and mineralogical differences have been observed for different size fractions. Compared to low calcium fly ash, optimum moisture content is low and maximum dry density is high for high calcium fly ash. Optimum moisture content is directly proportional and maximum dry density is inversely proportional to the carbon content. The mode and duration of curing have significant effect on strength and stress–strain behavior of compacted fly ash. The gain in strength with time for high calcium fly ash is very high compared to that of low calcium fly ash due to presence of reactive minerals and glassy phase.     

中国二八面体含铝蒙皂石矿物化学和晶体化学的特征

通过对我国６４个二八面体含铝蒙皂石矿物化学及晶体化学数据的统计分析，研究了它们的矿物化学及晶体化学的基本特征，并得出八面体组分是影响蒙皂石矿物学及物理化学性质的主要因素，在此基础上，利用ＡｌＡｌ－ＡｌＦｅ－ＡｌＭｇ三角图划分了我国二八面体含铝蒙皂石的晶体化学类型，并对原分类图进行了模式化处理，使ＡｌＡｌ－ＡｌＦｅ－ＡｌＭｇ图更具实际意义，蒙皂石的阳离子交换容量与晶体化学模型有对应性，并受八面体三价     

High-pressure X-ray and Raman study of a ferrian magnesian spodumene

The high-pressure behaviour of a synthetic P2₁/c ferrian magnesian spodumene, ^M2 (Li_0.85Mg_0.09Fe²⁺ _0.06)^M1(Fe³⁺ _0.85Mg_0.15)Si₂O₆, has been investigated using in situ single-crystal X-ray diffraction and Raman spectroscopy. No phase transition has been observed within the pressure range investigated. The isothermal equation of state up to 7 GPa was determined. V₀, K_T0 and K, simultaneously refined with a Murnaghan equation of state, are: V₀= 415.66(7) ų, K_T0=83(1) GPa and K=9.6(6). The magnitudes of the principal unit-strain coefficients were calculated and their ratios 1:2:3=1.00:1.85:2.81 at P=6.83 GPa indicate a very strong anisotropy. Monitoring of the intensity of b-type reflections (h+k= 2n+1) confirms that from room conditions up to 7 GPa the primitive lattice is maintained. Raman spectra have been collected up to 7.4 GPa. No change in the number of observed vibrational modes occurs in the pressure range investigated. At high frequency, the Raman doublet relative to the Si–O–Si vibrations of the two distinct tetrahedral chains is a broad band at room pressure, however, the frequency difference between the two modes increases with increasing pressure.Operating system: Windows NT