水泥—水玻璃在房屋增层地基加固工程中的应用

当前加层房屋日益增多,其地基加固处理的方法很多。在确定加固方法之前,需对旧楼地基基础及结构进行验算,包括桩端持力层的强度,桩的容许承载力,桩基础沉降等。水泥-水玻璃双液化学灌浆法首次用于房屋增层地基加固,该方法具有可灌性高(K=10-6cm/s)、凝胶时间快(15~120 s)、强度较高(5~20 MPa)等诸多材料特性,可满足新增的上部结构荷载对地基的新要求。文章还介绍了一个工程实例      

CHANNEL EROSION DAMAGES AND PROTECTION MEASURES IN SOUTHEAST ARIZONA

1INTRODUCTIONThesouthwesternregionoftheUnitedStates,includingSoutheastArizona,ischaracterizedbyasemiaridclimatewithhotsummers,mildwinters,andephemeralstreamsdrainingsparselyvegetatedareas.ChannelmorphologyoftheephemeralstreamsinSoutheastArizonaisinfluencedbybothlateralandverticalchannelchangesoccurringduringmajorfloods.Lateralchannelchangesoccurinthreewaysbankerosion,meandermigration,andchannelavulsion.Verticalchannelchangesinclude,beddegradationoraggradation,andmayoccurseparatelyorinco…     

Climatic signals in lacustrine deposits of the Upper Yacoraite Formation,Western Argentina: Evidence from clay minerals,analcime, dolomite and fibrous calcite

Authigenic clays are an important control on reservoir quality in lacustrine carbonates but remain challenging to predict. Lacustrine depositional systems respond to climatic variations in rainfall, surface runoff and groundwater input, and evaporation, and result in rapid and frequent changes in lake volume; this is expressed through changing water depth and shoreline position. In the upper portion of the Early Palaeocene Yacoraite Formation of the Salta Basin in Argentina, extensive lacustrine deposits were deposited during the sag phase of rifting. Prior high-resolution stratigraphic studies have suggested that climatic factors control microbial carbonate sequences within a ‘balanced fill’ lake, with variation in the lake level having a major influence on facies association changes. This study characterizes the evolution of facies and mineralogy within the Yacoraite Formation, focusing on the distribution of clay minerals, making a link between the high, medium and low-frequency sequence stratigraphic cycles. The low-frequency transgressive hemicycle of the upper portion of the Yacoraite Formation is comprised of abundant siliciclastic facies, suggesting a wetter period. Microbialites occurring in this interval are coarse-grained and agglutinated. Detrital clay minerals such as illite and chlorite and associated siliciclastic sediments were input to the lake during high-frequency transgressive periods. During high-frequency regressive hemicycles, sedimentation was dominated by carbonate facies with Ca-rich dolomite and the authigenic clays are comprised of chlorite/smectite mixed-layers. By contrast, the low frequency regressive hemicycle records fine-grained agglutinated microbialite with horizons of fibrous calcite, more stoichiometric dolomite, barite and authigenic magnesian smectite. This indicates elevated ion concentrations in the lake under intense evaporation during an arid period. Understanding the conditions that are favourable for formation and preservation of authigenic clays within the lacustrine environment can improve understanding of reservoir quality in comparable economically important deposits.     

The origin of magnetization and geochemical alteration in a fault zone,Kilve, England

The origin of an apparently syndeformational chemical remanent magnetization (CRM) and geochemical alteration in a fault zone in the Bristol Channel Basin, southwest England, was investigated. Deformation in the fault zone occurs in Jurassic aged, organic-rich limestones and consists of numerous normal and oblique-slip faults and associated folds. Migration of basinal, radiogenic fluids is indicated by elevated ⁸⁷Sr/⁸⁶Sr values for calcite veins that occur throughout the fault zone. Some of the calcite veins contain hydrocarbons sourced from deeper strata. Elevated ⁸⁷Sr/⁸⁶Sr values in the host Jurassic limestones indicate that they were also extensively altered by radiogenic fluids that migrated through microfractures in addition to major fault and fracture planes. Folded and tilted host limestones contain a pervasive secondary CRM residing in magnetite that was acquired during deformation in the Tertiary. The association between this pervasive CRM and the pervasive geochemical alteration is consistent with a genetic connection between the orogenic fluids and the CRM although the timing of CRM acquisition (Tertiary) is not consistent with structural interpretations for the timing of most veining. An alternative remagnetization mechanism which is not triggered by externally derived fluids, such as diagenesis of hydrocarbons, might account for the CRM. Hydrocarbon-bearing veins also contain a CRM that resides in magnetite, although the time for remanence acquisition is not well constrained by field tests. © 1998 John Wiley & Sons, Ltd.     

新型抗水氯氧镁水泥防渗渠在自然环境的水化产物、相转变规律及其对强度的影响

氯氧镁水泥(Magnesium oxychloride cement, MOC)具有快凝、早强、高强、防火和不腐蚀玻璃纤维等优点,非常适合于制作玻璃纤维增强薄壁制品,在农业灌溉工程中具有良好的应用前景。采用XRD和TOPAS分析了新型抗水氯氧镁水泥制成内蒙古防渗渠的物相组成,探讨了氯氧镁水泥制品在自然环境的水化产物与相转变规律、以及相组成对强度的影响。结果表明,在水分缺少的条件下,氯氧镁水泥的水化产物主要为5Mg(OH)_2·MgCl_2·8H_2O(5·1·8)和Mg(OH)_2;在水分充足的条件下,水化产物主要为Mg(OH)_2和5·1·8,碳化产物为碳化氯氧化镁Mg(OH)_2·MgCl_2·2MgCO_3·6H_2O(1·1·2·6)和水菱镁矿4MgCO_3·Mg(OH)_2·4H_2O(4·1·4)。水化产物对强度有促进作用,而碳化产物会降低强度。通过10年的工程环境考验,证明新型氯氧镁水泥制品在环境中能够保持主要强度相5·1·8的稳定性,具有良好的长期力学性能。     

地层水条件下碳酸盐矿物热力学平衡条件及其在克拉2气田的应用

基于热力学平衡理论及库车盆地的实际,建立了该区地层水温度、压力条件下方解石溶解、白云石对方解石交代作用的热力学平衡条件,并根据地层水介质特征探讨了该区方解石溶解、白云石交代方解石的具体成岩反应状况,认为该区地层水条件下正进行着方解石溶蚀及白云石对方解石的交代作用,方解石的溶蚀是形成该区深层次生孔隙的根本因素。      

水泥固化锌污染土电阻率与强度特性研究

以标准砂及普通硅酸盐水泥为试验材料,制作水泥固化锌污染土样,进行了一系列电阻率和无侧限抗压强度试验。研究了交流电频率对水泥固化锌污染土电阻率的影响、不同含量锌离子对水泥缓凝作用的影响、锌离子含量和龄期分别对水泥土电阻率和强度的影响、电阻率与无侧限抗压强度的关系。结果表明：电阻率随电流频率的增加而明显降低,尤其当频率低于50 kHz时为甚;不同含量的锌离子对水泥土的缓凝作用影响明显,随着锌离子含量的增大,水泥土强度的充分发挥所需时间逐渐增长,但在锌离子含量为500 mg/kg时,缓凝作用表现异常;电阻率和强度均随龄期的增加而增长,随锌离子的含量的增加上下波动,电阻率在锌离子含量为50 mg/kg和500 mg/kg时出现极值,强度在锌离子含量为100 mg/kg和500 mg/kg时出现极值;在各个龄期下,电阻率与强度均呈现出很好的线性关系。     

Diagenetic fluid evolution and water-rock interaction model of carbonate cements in sandstone: An example from the reservoir sandstone of the Fourth Member of the Xujiahe Formation of the Xiaoquan-Fenggu area,Sichuan Province,China

Carbonate cement is the most abundant cement type in the Fourth Member of the Xujiahe Formation in the Xiaoquan-Fenggu area of the West Sichuan Depression. Here we use a systematic analysis of carbonate cement petrology, mineralogy, carbon and oxygen isotope ratios and enclosure homogenization temperatures to study the precipitation mechanism, pore fluid evolution, and distribution of different types of carbonate cement in reservoir sand in the study area. Crystalline calcite has relatively heavy carbon and oxygen isotope ratios(δ13C = 2.14‰, δ18O = -5.77‰), and was precipitated early. It was precipitated directly from supersaturated alkaline fluid under normal temperature and pressure conditions. At the time of precipitation, the fluid oxygen isotope ratio was very light, mainly showing the characteristics of a mixed meteoric water-seawater fluid(δ18O = -3‰), which shows that the fluid during precipitation was influenced by both meteoric water and seawater. The calcite cement that fills in the secondary pores has relatively lighter carbon and oxygen isotope ratios(δ13C = -2.36‰, δ18O = -15.68‰). This cement was precipitated late, mainly during the Middle and Late Jurassic. An important material source for this carbonate cement was the feldspar corrosion process that involved organic matter. The Ca2+, Fe3+ and Mg2+ ions released by the clay mineral transformation process were also important source materials. Because of water-rock interactions during the burial process, the oxygen isotope ratio of the fluid significantly increased during precipitation, by about 3‰. The dolomite cements in calcarenaceous sandstone that was precipitated during the Middle Jurassic have heavier carbon and oxygen isotope ratios, which are similar to those of carbonate debris in the sandstone(δ13C = 1.93‰, δ18O = -6.11‰), demonstrating that the two are from the same source that had a heavier oxygen isotope ratio(δ18O of about 2.2‰). The differences in fluid oxygen isotope ratios during cement precipitation reflect the influences of different water-rock interaction systems or different water-rock interaction strengths. This is the main reason why the sandstone containing many rigid particles(lithic quartz sandstone) has a relatively negative carbon isotope ratio and why the precipitation fluid in calcarenaceous sandstone has a relatively heavier oxygen isotope ratio.     

Stabilization of Expansive Clays Using Granulated Blast Furnace Slag (GBFS) and GBFS-Cement

Expansive clays undergo swelling when subjected to water. This can cause damage, especially to light weight structures, water conveyance canals, lined reservoirs, highways, and airport runways unless appropriate measures are taken. In this study, granulated blast furnace slag (GBFS) and GBFS-cement (GBFSC) were utilized to overcome or to limit the expansion of an artificially prepared expansive soil sample (sample A). GBFS and GBFSC were added to sample A in proportions of 5–25% by weight. The effects of these stabilizers on grain size distribution, Atterberg limits, swelling percentage and rate of swell of soil samples were determined. GBFS and GBFSC were shown to successfully decreasing the total amount of swell while increasing the rate of swell.     

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.