O(T2)精度下椭球界面Dirichlet边值问题的积分解

研究了边界是参考椭球面的Laplace方程Dirichlet边值问题的求解，在O(ε4·T)精 度下给出了参考椭球界面上扰动重力位Dirichlet外问题的积分解式. 该结果理论上优于目 前常用的球近似下的积分解式，从而为研究物理大地测量中边值问题的求解提供了新的依据     

运用改进系统建模法对南海气象数据的建模研究

在系统建模理论的基础上,运用改进的动态数据建模方法,对南海气象数据中的温度进行建模并验证了模型的适用性.根据模型推导出格林函数、逆函数和自协方差函数等,并讨论了南海气象数据中温度模型的稳定性、可逆性和合理性.对系统的频率特性和谱函数进行分析讨论,并给出建模过程中的一些图像.根据模型的适用性检验发现,对所研究的气象数据而言,ARMA(4, 3)模型是最合适的,具有平稳可逆性.所有的建模和分析过程在MATLAB上实现.实验结果表明这种建模方案简便易行,能够快速准确地确定系统的合理模型.     

陕西略阳铧厂沟金矿床地质与矿床类型

铧厂沟金矿床位于勉略缝合带中泥盆系三河口群郭镇岩组中。含矿与容矿岩系为泥盆系三河口群郭镇岩组中的细碧岩和结晶灰岩。主控矿构造为寨子湾韧-脆性剪切构造带。围岩蚀变包括退化蚀变和矿化蚀变。在矿区内产出南北两条矿化带，矿石类型为蚀变细碧岩型、黄铁绢英片岩型和石英脉型。主要的金属矿物为黄铁矿和黄铜矿，金矿物是自然金。韧脆性剪切构造叠加和岩石强烈变形、彻底退化蚀变以及后期含矿热液交代与充填是主要的成矿作用，属于火山-沉积岩系中的类卡林型金矿床。     

TGQ系列勘察取样钻机(具)的研究

取样钻技术是区域地质填图、物化探取样、古地磁取样、地质灾害预警防治和工程勘察等必不可少的技术手段。TGQ系列勘察取样钻机包括TGQ-1、5、10三个型号，分析了其结构、特性和特点，以及配套钻具和取样器。     

建筑物沉降规律的综合时序分析

建筑物的沉降监测数据序列具有趋势变化和随机变化的特点，本文针对两种变化项的特点分别建立相应的数学模型，再将其组合起来建立综合数学模型，从总体上把握沉降数据序列的变化规律。实例计算分析表明，此方法具有较高的拟合精度和预测能力，具有一定的应用参考价值。     

复种指数遥感监测方法

复种指数是反映水土光与自然资源利用程度的指标 ,其实质是沿时间序列 ,反映某一种植制度对耕地的利用程度。联系复种指数与时间序列NDVI曲线的纽带是农作物年内的循环规律。时间序列的NDVI值蕴涵着植被的生长和枯萎的年循环节律 ,经时间序列谐函数分析法 (HarmonicAnalysisofTimeSeries ,HANTS)重构的NDVI曲线 ,可以准确地反映农作物的出苗、拔节、抽穗、收获等物理过程。因此 ,根据时间序列的NDVI曲线的周期性 ,可以反向捕捉到耕地农作物动态的信息 ,进而得到耕地的复种指数。本文依据上述原理 ,提出复种指数遥感监测的方法 ,然后用 1999年至 2 0 0 2年 4年的VGT(SPOT4卫星vegetation数据 )旬合成NDVI时间序列数据集提取了复种指数 ,并利用地面样区观测结果和统计数据进行检验 ,取得很高的精度。     

乾陵地震台DSC-2A型数据采集器雷害故障与处理

通过对乾陵地震台DSC2A型数据采集器雷害故障现象特征、诊断修复过程、故障原因等的分析,提出了数据采集器雷害故障检修的一般步骤方法,并认为,数据采集器内部模拟输入通道转换继电器和通道程控放大电路ICL7650集成运放块易遭雷击损坏,是故障率较高的部件。     

Use of time series analysis for the identification of tidal effect on groundwater in the coastal area of Kimje, Korea

The purpose of this study is to apply time series analysis to investigate whether the groundwater quality in the coastal area is affected by the tide. Continuous and regular in situ monitoring data of electrical conductivity (EC) and groundwater level, and tidal level data measured by the National Oceanographic Research Institute were used for the time series analysis. Through the time series analysis, it is known that EC and groundwater level conspicuously fluctuate with two periodicities (15.4 and 0.52-day), which is very similar to those of the tide. Also the behaviors of their fluctuations vary in accordance with the tidal period. These indicate that the groundwater quality has been mainly controlled by the tidal level, and the strength of tidal effect on the groundwater quality is different according to the tidal period.     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.