机械研磨对平鲁煤系高岭石热行为的影响

对煤系高岭石进行0-2h的研磨之后，再在900℃、1000℃、1400℃的温度条件下分别对其加热1h，然后利用X射线衍射（XRD）、差热分析（DTA）、红外光谱（IR）等手段，研究机械研磨对于煤系高岭石晶体结构的破坏作用以及对其热行为的影响。结果显示，煤系高岭石被研磨1h之后，高岭石的晶体结构几乎全部跨塌。把研磨1h的煤系高岭石加热到1000℃（加热1h），便能形成结晶良好的莫来石。     

High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

厚层覆盖区综合物化探方法找金试验研究——以广西兴安金石金矿为例

在兴安金石金矿外围 4号分散流异常区 ,通过地电化学提取金测量法 ,查明测区存在 5个走向规模小于 5 0 m的金异常区 ,W( Au) 最大值为 72 .4× 10 - 9,高出背景值十几倍 ,并藉综合土壤吸附汞测量 ,高精度磁测和激发极化法等多种物化探方法来确定这些异常区的地质、地球化学和地球物理特征 ,提出金矿成矿的有利部位在金的地电提取高异常区、高汞量异常区、高磁性异常区、低视电阻率异常区和中等视极化率异常区的“三高一低一中”的找矿模式。确定测区的北北东角 (右下角 )一带具备有利的金矿成矿条件     

GEOCHEMICAL EFFECTS OF MAJOR ELEMENTS DURING FLUID-ROCKS INTERACTION IN MARINWOBO FAULT IN THE SOUTH MARGIN AREAS OF ALTAI MOUNTAINS

There are four types of metamorphic rocks in the Marinwobo fault, i. e, cataclasite, mylonite,mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

中原地区M≥6级地震后的减(增)震效应

通过对中原地区1500年－2000年所有19次M≥6级地震后空间图像的分析，初步认为M≥6级地震发生后平均63年内，在距原震中平均176km内无M≥5级地震发生，全部19次震例均呈现出内部减震效应，而在其外围出现地震增强的活动图像特征，增震效应对应率为72％。这种强震后的减（增）震效应，不仅对地震危险性分析，而且对1年尺度以上的地震趋势预测均有一定的意义。     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey

Thermal waters hosted by Menderes metamorphic rocks emerge along fault lineaments in the Simav geothermal area. Thermal springs and drilled wells are located in the Eynal, Çitgöl and Na a locations, which are part of the Simav geothermal field. Studies were carried out to obtain the main chemical and physical characteristics of thermal waters. These waters are used for heating of residences and greenhouses and for balneological purposes. Bottom temperatures of the drilled wells reach 163°C with total dissolved solids around 2225 mg/kg. Surface temperatures of thermal springs vary between 51°C and 90°C. All the thermal waters belong to Na–HCO₃–SO₄ facies. The cold groundwaters are Ca–Mg–HCO₃ type. Dissolution of host rock and ion-exchange reactions in the reservoir of the geothermal system shift the Ca–Mg–HCO₃ type cold groundwaters to the Na–HCO₃–SO₄ type thermal waters. Thermal waters are oversaturated at discharge temperatures for aragonite, calcite, quartz, chalcedony, magnesite and dolomite minerals giving rise to a carbonate-rich scale. Gypsum and anhydrite minerals are undersaturated with all of the thermal waters. Boiling during ascent of the thermal fluids produces steam and liquid waters resulting in an increase of the concentrations of the constituents in discharge waters. Steam fraction, y, of the thermal waters of which temperatures are above 100°C is between 0.075 and 0.119. Reservoir pH is much lower than pH measured in the liquid phase separated at atmospheric conditions, since the latter experienced heavy loss of acid gases, mainly CO₂. Assessment of the various empirical chemical geothermometers and geochemical modelling suggest that reservoir temperatures vary between 175°C and 200°C.     

Chemical equilibria of thermal waters for the application of geothermometers from the Guanzhong basin, China

In this study, representative samples from thermal wells and springs were chemically analyzed and geothermometers were used to calculate the deep temperatures of geothermal reservoirs on the basis of water–mineral equilibrium. In some cases, however, the chemical components are not in equilibrium with the minerals in the reservoir. Therefore, log(Q/K) diagrams are used to study the chemical equilibrium for the minerals that are likely to participate. The Na–K–Mg triangular diagram is also applied to evaluate the equilibrium of water with reservoir rocks. Standard curves at the reference temperatures are prepared to reveal which type of silica geothermometer is appropriate for the specified condition. This study shows that water samples from geothermal wells W9 and W12 are in equilibrium with the selective minerals, and chalcedony may control the fluid–silica equilibrium. It is estimated that there is an exploitable low-temperature reservoir with possible temperatures of 80–90°C in the Guanzhong basin.