Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

基于GIS/MIS/OA的短周期工业原料林经营模式研究

提出了短周期工业原料林经营模式的概念,探讨了短周期工业原料林经营模式的体系结构、子系统功能和主要林业数表类型,说明其与GIS/MIS/OA系统集成的必然趋势,并以岳阳纸业股份公司的纸浆原料林为例进行了实例分析。     

基于GIS的商业网点选址研究与实现

利用平面／网络优化模型，综合权衡市区选址的基本费用及商业网点日常经营的成本，引入交通便利因子作为限制条件，并运用直接搜索的Dixon方法，加强了不确定性选址问题的约束条件，降低不确定性问题计算的复杂度，减少在选址问题实现中主观因素对选址结果的影响。最后以某区新建商业网点选址为例，详细分析了直接搜索算法应用的具体过程。     

山西沁水盆地煤层气成藏的微观动力能条件研究

煤层气成藏的微观动力能条件主要包括煤储层的孔隙—裂隙系统、煤储层的生气作用和储气作用两个方面。以山西沁水盆地为例,深入剖析了煤储层的孔隙—裂隙系统及其发育历程、煤储层的生气作用与能量聚散,阐明了煤层气成藏的微观动力能对成藏效应的控制作用。结果表明:构造作用对储层渗透率具有明显的控制作用,成烃增压致使能量聚集,成为盖层突破作用的主要驱动力,而能量放散则主要是通过煤储层孔隙—裂隙系统的产生、发展。根据上述研究成果,沁水盆地煤层气成藏的地质区划结果为:盆地南部的有利区带为阳城和晋城的北部地区,包括潘庄、樊庄、郑庄等地区;盆地中部的有利区带为安泽—沁源地区,位于盆地西斜坡的中南部;盆地北部的可能有利区带为寿阳东南部地区,位于榆次东北部和阳泉西南部之间。     

HD-4002型综合测井仪

HD 4002型综合测井仪是核工业北京地质研究院于1998年开始研制的, 其目标是为铀矿地质系统提供适合砂岩型铀矿勘查的轻便型数字测井仪, 满足测井生产的需要。该仪器于2001 年3月通过部级鉴定, 2002至2003年投入海拉尔盆地铀矿勘查测井试生产。本文介绍了仪器的用途、功能及特点、性能指标, 简要说明了各部分的工作原理。     

Land-use classification using ASTER data and self-organized neutral networks

Operationally AVHRR and TM/TM+ data were used and a supervised maximum likelihood classification (MLH) was applied to depict land use changes in Beijing, providing basic maps for planning and development. With rapid growth of the city these are helpful to deal with higher resolution data, whereas new classification algorithms produce land use maps more accurate. In the paper, new sensor ASTER data and the Kohonen self-organized neural network feature map (KSOM) were tested.The TSOM classified 7% more accurately than the maximum likelihood algorithm in general, and 50% more accurately for the classes ‘residential area’ and ‘roads’. The results suggest that ASTER data and the Kohonen self-organized neural network classification can be used as an alternative data and method in a land use update operational system.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

数字地震仪的发展历史及展望

地震仪经历了光点，模拟和数字的变化，数字地震仪本身由16位发展到24位，其附属设备（电缆，检波器）也是到了不同程度的发展。近年来，I／O等公司利用MEMS技术研制了新型地震检波器，这一新的发展对于地震采集尤其是多分量采集带来重要影响。     

西湖凹陷陆盆冲积体系河道演变规律探讨

西湖凹陷渐新统一中新统陆盆沉积发育了类型丰富的河道沉积，本文根据陆盆充填机制对盆地演化各阶段的控制作用，从沉积层序、沉积构造、岩性组合特征诸方面探讨了盆地演化过程的河道变迁特点。     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.