Organic carbon deposition and phosphorus accumulation during Oceanic Anoxic Event 2 in Tarfaya, Morocco

With a multi-proxy approach, an attempt was made to constrain productivity and bottom-water redox conditions and their effects on the phosphorus accumulation rate at the Mohammed Plage section on the Tarfaya coast, Morocco, during the Cenomanian-Turonian Anoxic Event (OAE 2). A distinct δ¹³C_org isotope excursion of +2.5‰ occurs close to the top of the section. The unusually abrupt shift of the isotope excursion and disappearance of several planktonic foraminiferal species (e.g. Rotalipora cushmani and Rotalipora greenhornensis) in this level suggests a hiatus of between 40–60 kyrs at the excursion onset. Nevertheless, it was possible to determine both the long-term environmental history as well as the processes that took place immediately prior to and during OAE 2. TOC% values increase gradually from the base of the section to the top (from 2.5% to 10%). This is interpreted as the consequence of a long-term eustatic sea-level rise and subsidence causing the encroachment of less oxic waters into the Tarfaya Basin. Similarly a reduction in the mineralogically constructed ‘detrital index’ can be explained by the decrease in the continental flux of terrigenous material due to a relative sea-level rise. A speciation of phosphorus in the upper part of the section, which spans the start and mid-stages of OAE 2, shows overall higher abundances of P_reactive mass accumulation rates before the isotope excursion onset and lower values during the plateau. Due to the probable short hiatus, the onset of the decrease in phosphorus content relative to the isotope excursion is uncertain, although the excursion plateau already contains lower concentrations. The C_org/P_total and V/Al ratios suggest that this reduction was mostly likely caused by a decrease in the available bottom oxygen content (probably as a result of higher productivity) and a corresponding fall in the phosphorus retention ability of the sediment. Productivity appears to have remained high during the isotope plateau possibly due to a combination of ocean-surface fertilisation via increased aridity (increased K/Al and Ti/Al ratios) and/or higher dissolved inorganic phosphorus content in the water column as a result of the decrease in sediment P retention. The evidence for decreased P-burial has been observed in many other palaeoenvironments during OAE 2. Tarfaya's unique upwelling paleosituation provides strong evidence that the nutrient recycling was a global phenomenon and therefore a critical factor in starting and sustaining OAE 2.     

Wave interaction with a submarine pipeline in clayey soil due to random waves

The wave pressure and uplift force due to random waves on a submarine pipeline (resting on bed, partially buried and fully buried) in clayey soil are measured. The influence of various parameters viz., wave period, wave height, water depth, burial depth and consistency index of the soil on wave pressures around and uplift force on the submarine pipeline was investigated. The wave pressures were measured at three locations around the submarine pipeline (each at 120° to the adjacent one). It is found that the wave pressure and uplift force spectrum at high consistency index of the soil is smaller compared to that of low consistency index. Just burying the pipeline (e/D=1.0) in clayey soil reduces the uplift force to less than 60% of the force experienced by a pipeline resting on the seabed (e/D=0.0) for I_c=0.33.     

硅质碎屑砂岩中胶结物来源的新认识

分析了浅埋藏砂岩的成岩环境,并从岩石学、矿物学、同位素及质量平衡估算方面论证硅质碎屑砂岩中的胶结物主要来源于砂岩浅埋藏期间的地下水,进而分析浅埋藏带内地下水的流动机制及早期胶结作用对晚期成岩作用的影响。     

含油玄武岩中绿泥石的形成温度

以苏北盆地高邮凹陷闵桥地区含油玄武岩中的绿泥石为研究对象，探讨了其成因和形成温度，认为玄武岩中绿泥石有两种形成方式、五条形成途径：其一为蚀变演化，包括：火山玻璃、斜长石、辉石的蚀变，交代橄榄石斑晶，以及皂石的进一步演化；其二为沉淀结晶，包括从热液中直接沉淀生长和胶体溶液充填后的结晶。计算结果显示，蚀变演化形成的绿泥石，其形成温度为128－271℃；沉淀结晶形成的绿泥石，其形成温度为31－63℃。玄武岩中绿泥石形成温度与埋藏深度间没有明显的线性相关。进一步研究表明，本区玄武岩作为储油层，其进油时的温度为62－118℃，不超出48－137℃。     

具有经济性前景的粗岩屑堆天然冷能集聚分析

The coarse-detrital deposits have the properties of cold accumulation and maintenance of cold for a long time. Now, at some place where the mean annual temperature of air is positive, one even can get the permafrost by artificial formation of the burial mound. According to these properties, some lowenergy storehouses are built for various purposes.     

走滑断裂古地震探槽选址范例

探槽选址直接决定了古地震研究的质量,且理想探槽位置具有稀缺性。在收集82篇国内外走滑断裂古地震研究论文的基础上,分析了长序列古地震探槽选址和同震位移探槽选址的构造地貌共性特征。长序列古地震探槽一般布设在断塞塘、拉分盆地、小型湖盆、闸门脊汇水一侧及比较平缓的冲洪积扇或大型冲洪积扇末端等地貌位置。这些地貌位置的共同特征是位于连续的、较高沉积速率的沉积环境,且通常富集14C测年物质。在探槽选址的过程中,不仅要对现今沉积环境,也要对其古地理环境进行评价。然而以发掘古地震同震位移为目的的探槽选址则不同,成功的研究点往往较频繁发生侵蚀和下切事件,其中冲沟是最常见的地貌标志。探槽布设以垂直和平行探槽为主,采取逐次掘进或相间平行排列的方式开挖。由于理想探槽位置的稀缺性,所以在这些优质的探槽点一定要开展长期详细地深入研究,最大限度获得古地震事件的长序列,同时也要注意新技术和新方法的应用。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

华南石炭纪中期白云岩地层分布及其形成模式

石炭纪是地质演化历史上重要的时期,发生了全球规模的海西造山运动,晚古生代大冰期（LPIA）达到峰值,全球海平面频繁波动,导致古气候和古环境的剧烈变化。在华南,石炭纪中期,浅水碳酸盐岩台地相区广泛发育一套白云岩沉积。本文系统总结华南3个主要碳酸盐台地内白云岩的厚度及时代,识别出白云岩时空分布的差异性。结合石炭纪中期全球气候环境特征,认为冰期兴盛引发了全球海平面下降,导致华南各沉积盆地形成利于白云岩化的环境,白云岩得以发育。而白云岩时空分布的差异性可能与各沉积盆地独特的构造演化以及不同成岩模式有关。中下扬子碳酸盐岩台地白云岩的形成模式主要为萨勃哈模式和成岩早期浅埋藏的渗透回流模式,形成相对较薄的白云岩沉积;中南部和西南部碳酸盐岩台地白云岩的形成模式为渗透回流模式,成岩规模较大,沉积较厚。     

白云岩成因相关问题及主要形成模式

在综述白云岩成因研究历程和最新成果的基础上,总结阐述了与之相关的4个方面的问题:①尽管白云岩原生沉淀与次生交代成因分歧依旧,但越来越多的证据表明白云岩的形成以次生交代为主;②白云石难以直接沉淀的原因是受结晶动力学条件制约,而非热力学因素;③控制次生交代强度和规模的关键条件是富Mg流体的来源及其量的大小;④微生物活动很可能有助于白云岩的形成。关于白云岩化模式,其核心是构建富Mg流体与先成钙质碳酸盐岩相互作用的条件与场所,其中浓缩正常海水模式、萨布哈模式、混合水模式和埋藏白云岩化模式等具有一定的普遍性。理清白云岩成因问题,对于认识以白云岩及其相关的碳酸盐岩为储层的油气勘探工作尤为重要。