内蒙古喀喇沁旗金蟾山金矿床控矿断裂特征

金蟾山金矿位于内蒙古喀喇沁旗安家营子花岗岩体内的断裂中,矿区断裂构造分为东、西两个断裂群,以NNE向和近SN向脆性断裂为主,成群分布,控矿断裂形成于135～126Ma期间;成矿前表现为两组共扼的节理,成矿期近SN向和NNE向断裂、主断裂与派生断裂共同控矿。     

The fractal geometry of flow paths in natural fractures in rock and the approach to percolation

The distributions of contact areas in single, natural fractures in quartz monzonite (Stripa granite) are found to have fractal dimensions which decrease fromD=2.00 to values nearD=1.96 as stress normal to the fractures is increased from 3 MPa up to 85 MPa. The effect of stress on fluid flow is studied in the same samples. Fluid transport through a fracture depends on two properties of the fracture void space geometry. the void aperture; and the tortuosity of the flow paths, determined through the distribution of contact area. Each of these quantities change under stress and contribute to changes observed in the flow rate. A general flow law is presented which separates these different effects. The effects of tortuosity on flow are largely governed by the proximity of the flow path distribution to a percolation threshold. A fractal model of correlated continuum percolation is presented which quantitatively reproduces the flow path geometries. The fractal dimension in this model is fit to the measured fractal dimensions of the flow systems to determine how far the flow systems are above the percolation threshold.     

托莫尔日特金矿区韧脆性剪切带及其控矿作用

矿区位于近NW-NWW向展布的断裂带内,并严格受其控制.控矿断裂带为一条韧-脆性剪切带,其形成主要经历了早期韧性变形、晚期脆性变形及后期改造破坏3个阶段,叠加于早期韧性剪切带之上的晚期脆性破裂带,是矿脉的主要产出位置,成矿与断裂带的韧-脆性转换密切相关.矿体形成于韧-脆性剪切带的转换带附近,后期由于抬升剥蚀而出露地表.矿体分布可能具有"两层楼"式的垂直分带,上部为石英脉型金矿体,品位较高,但规模不大;下部为糜棱岩型金矿体,规模较大,但品位稍低.因此本区以后的找矿工作中应注意挖掘深部糜棱岩型金矿的潜力.     

新疆库松木切克山喇嘛萨依式铜矿的勘查标志

本文通过对库松木切克山喇嘛萨依铜矿地质特征及控矿因素的研究,总结出该类矿床的若干勘查标志,其中地层层位、含矿岩相、地球化学异常、容矿岩石、围岩蚀变、活化脉体及同生断裂等最为明显。在区域内如能确定出这些标志,尤其是标志组合的存在,则将可能取得该类矿床找矿的新突破。     

内蒙古西部额济纳旗及邻区石炭系—二叠系的储集条件——石炭系—二叠系油气地质条件研究之二

通过对研究区石炭系—二叠系碎屑岩沉积相纵向演化与平面展布特征、岩石学特征、成岩作用、孔隙类型的研究,认为研究区石炭系—二叠系碎屑岩砂砾岩的发育程度、成分成熟度、结构成熟度等均受阿拉善古陆和马鬃山-拐子湖中间隆起带2个沉积物源的控制。南部以阿拉善古陆为主要沉积物源,砂砾岩发育,成分成熟度和结构成熟度均较高。由南向北阿拉善古陆作为物源的影响逐渐降低,砂砾岩发育程度逐渐变差,成分成熟度和结构成熟度亦逐渐变差。以粘土矿物及其相对含量、自生矿物特征等为主要依据,对成岩作用阶段进行划分,多数剖面以中成岩A期为主,研究区北部、北山地区和受阿尔金走滑断裂影响的雅干一带,受构造动力变质作用或岩浆热接触变质作用的影响进入中成岩B期。碎屑岩储集层孔隙演化受成岩作用的控制,多数以溶蚀孔（缝）为主,少数具有残余粒间孔,总体来看孔隙发育较差。除碎屑岩储集层外,各类碳酸盐岩、火山岩,以及华力西期风化壳的各类岩石均可能成为重要的储集层类型。     

A macroscopic damage‐plastic constitutive law for modeling quasi‐brittle fracture and ductile behavior of concrete

A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:

相似文献   

微分几何学在地质构造定量研究中的应用

阐述了在构造地质学定量研究中引入微分几何学的必要性,并讨论了在地质构造定量研究中的具体应用及相关的数值计算方法.微分几何为定量描述地质构造形态、建立精确的数学解析模型提供了基础,是深入定量研究地质构造形态及其变化的重要数学工具.在前人工作基础上,为更方便地与其他先进的技术和方法相结合,总结了地质构造的数学建模与重构、计算机自动分析计算、三维可视化与运动仿真.具体可以应用于裂缝预测、构造面形变分析、褶皱形态分类、隐藏断层探测,以及矿床和油气藏的预测研究等方面.     

江苏宜兴东岭逆冲断层带的构造地球化学特征研究

宜兴东岭逆冲断层带是一条脆性剪切带，断层带内不同变形程度的断层岩在构造地球化学特征上有明显的集散规律，随着岩石变形程度的增加，SiO2的含量相对降低，除FeO以外的其它主元素和除Li以外的微量元素则相对富集，即在断层岩变形过程中，SiO2自变形相对强烈的断层带中心向两侧的硅化带迁移，除FeO和Li之外的其它主元素和微量元素则自断层带两侧向中心迁移。这种迁移趋势是受各元素本身构造地球化学特性所制约。     

Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

密云地体铁矿成矿规律及找矿方向研究

应用地体构造理论 ,对密云地体含铁建造特征及构造对铁矿体的控制规律进行了研究。认为表壳岩为原始含矿围岩,ＴＴＧ杂岩破坏了原含矿岩系的连续性,使表壳呈残体漂浮或呈包体形式被包裹在ＴＴＧ杂岩中。矿体的赋存状态主要受两期共轴迭加褶皱构造和韧脆性关照切断裂复合控制。