托莫尔日特金矿区韧脆性剪切带及其控矿作用

矿区位于近NW-NWW向展布的断裂带内,并严格受其控制.控矿断裂带为一条韧-脆性剪切带,其形成主要经历了早期韧性变形、晚期脆性变形及后期改造破坏3个阶段,叠加于早期韧性剪切带之上的晚期脆性破裂带,是矿脉的主要产出位置,成矿与断裂带的韧-脆性转换密切相关.矿体形成于韧-脆性剪切带的转换带附近,后期由于抬升剥蚀而出露地表.矿体分布可能具有"两层楼"式的垂直分带,上部为石英脉型金矿体,品位较高,但规模不大;下部为糜棱岩型金矿体,规模较大,但品位稍低.因此本区以后的找矿工作中应注意挖掘深部糜棱岩型金矿的潜力.     

武当地区构造类型及其控矿作用

文中主要讨论了武当地区构造类型及控矿作用.构造类型基本包括伸展滑脱构造、推覆构造和脆性构造,分别发生在三个不同的时期.伸展滑脱构造主要存在于前印支期, 挤压推覆构造存在于印支期,脆性断裂出现在印支晚期.多重韧性滑脱面出现在武当群地层形成时的不同构造岩性界面上;不同层次顺层伸展滑脱面 (DF1-DF5)常出现在堆垛的构造岩性面上,并优先富集Au 、Ag矿;逆冲推覆构造使先存滑脱面变形,伴随褶皱作用使成矿元素流动、搬运、富集.     

大陆岩石圈在张裂和分离时的变形模式

通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的：上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的：上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。     

青藏高原东北缘大陆岩石圈现今变形和位移

川青地块在地貌上为川西高原,亦是青藏高原东北边缘最重要的构造单元。新的GPS监测资料表明,在欧亚框架内,川青地块及其邻近的龙门山带和华南地块西缘的地壳运动水平速度,具有自西向东由25.66mm/a递变下降到6.99mm/a的总趋势。速度矢量表现出顺时针涡旋转动。川青地块内具有局部应变积累的非均一的区域剪切。横切鲜水河断裂带中段新的GPS测量结果揭示,两侧地块间的平均左旋滑动速率约8mm/a;由于局部应变积累,断裂系南西侧的主断裂的移动速率为9.3mm/a,其间为拉分盆地和小的横向伸展断裂。鲜水河断裂系的左旋断裂滑动作用,调节了川青地块与川滇地块之间的相对运动。     

内蒙古喀喇沁旗金蟾山金矿床控矿断裂特征

金蟾山金矿位于内蒙古喀喇沁旗安家营子花岗岩体内的断裂中,矿区断裂构造分为东、西两个断裂群,以NNE向和近SN向脆性断裂为主,成群分布,控矿断裂形成于135～126Ma期间;成矿前表现为两组共扼的节理,成矿期近SN向和NNE向断裂、主断裂与派生断裂共同控矿。     

Modelling of anisotropic damage in brittle rocks under compression dominated stresses

A new model for describing induced anisotropic damage in brittle rocks is proposed. Although phenomenological, the model is based on physical grounds of micromechanical analysis. Induced damage is represented by a second rank tensor, which is related to the density and orientation of microcracks. Damage evolution is related to the propagation condition of microcracks. The onset of microcrack coalescence leading to softening behaviour is also considered. The effective elastic compliance of the damaged material is obtained from a specific form of Gibbs potential. Irreversible damage‐related strains due to residual opening of microcracks after unloading are also captured. All the model's parameters could be determined from conventional triaxial compression tests. The proposed model is applied to a typical brittle rock. Comparison between test data and numerical simulations shows an overall good agreement. The proposed model is able to describe the main features related to induced microcracks in brittle geomaterials. Copyright © 2002 John Wiley & Sons, Ltd.     

南海西南海盆的岩石圈张裂模式探讨

南海西南海盆的西北边缘和东南边缘在地形地貌上不对称,在地质构造特征上东南边缘为上板块边缘,西北边缘为下板块边缘,它们为一对共轭边缘。新生代张性构造运动和海底扩张活动中,上地壳呈脆性,发生过脆性变形,产生了一系列倾斜正断裂及一系列断块,断块沿断层面转动,在地表出现一系列半地堑,在拉张应力的进一步作用下,上地壳沿断层面被拉开;下地壳呈塑性,发生塑性变形,最后以瓶颈方式被拉断。由此可见,在张性应力场作用下,岩石圈的变形方式是分层而异的：上地壳以简单剪切方式变形,下地壳以纯剪切方式变形。因此,整个岩石圈的变形方式是分层变形的     

Extrusion movements of a tunnel head reinforced by finite length bolts—a closed‐form solution using homogenization approach

An analytical model on the general behaviour of a tunnel head, reinforced by finite length bolts is proposed. This model is based on the homogenization method and spherical symmetry assumption. Despite its simplicity, and in consequence its limits of validity, it does allow a quick estimation of the key design parameters: frontal displacement, extension of decompressed zone, ground stresses and bolt tension, and constitutes thereby a very useful and handy tool for design engineers. In particular, the influence of the reinforcement length, as well as other important design parameters, are studied by the proposed model. The charts resulting from the parametric studies are directly applicable. Otherwise, the comparison to a 3D numerical model is also presented in this paper. The first results provide the validation of the analytical solution, at least in terms of average extrusion movements. Copyright © 2000 John Wiley & Sons, Ltd.     

Thermo-hydro-mechanical modeling of unsaturated soils using isogeometric analysis: Model development and application to strain localization simulation

This study presents a thermo-hydro-mechanical (THM) model of unsaturated soils using isogeometric analysis (IGA). The framework employs Bézier extraction to connect IGA to the conventional finite element analysis (FEA), featuring the current study as one of the first attempts to develop an IGA-FEA framework for solving THM problems in unsaturated soils. IGA offers higher levels of interelement continuity making it an attractive method for solving highly nonlinear problems. The governing equations of linear momentum, mass, and energy balance are coupled based on the averaging procedure within the hybrid mixture theory. The Drucker-Prager yield surface is used to limit the modified effective stress where the model follows small strain, quasi-static loading conditions. Temperature dependency of the surface tension is implemented in the soil-water retention curve. Nonuniform rational B-splines (NURBS) basis functions are used in the standard Galerkin method and weak formulations of the balance equations. Displacement, capillary pressure, gas pressure, and temperature are four independent quantities that are approximated by NURBS in spatial discretization. The framework is used to simulate strain localization in an undrained dense sand subjected to plane strain biaxial compression under different temperatures and displacement velocities. Results show that an increase in the displacement rate leads to reduction in the equivalent plastic strain while an increase in the temperature leads to an increase in the equivalent plastic strain. The findings suggest that the proposed IGA-based framework offers a viable alternative for solving THM problems in unsaturated soils.     

基于cut-off方法刚性承台下群桩基础优化分析

针对刚性筏板下群桩基础优化设计问题进行分析,通过改变桩长分布来调整各桩的荷载分担,群桩分析采用基于弹性理论的积分方程方法,并通过cut-off方法来反映桩的弹塑性特性,实现群桩基础的弹塑性优化分析,改进了常规弹性分析方法的缺陷。算例分析表明,随着外荷载的不断增加,角桩首先达到极限荷载,对角桩超出极限荷载的部分进行重新分布,继而使得边桩逐渐达到极限承载状态,继续加载直至内桩也达到极限承载状态,从而引起桩筏基础的整体破坏。采用cut-off方法可以改进基础变刚度优化设计,使之与实际情况更为吻合。