Timing of UHP metamorphism in the Hong’an area,western Dabie Mountains,China: evidence from zircon U–Pb age,trace element and Hf isotope composition

The Hong’an area (western Dabie Mountains) is the westernmost terrane in the Qinling-Dabie-Sulu orogen that preserves UHP eclogites. The ages of the UHP metamorphism have not been well constrained, and thus hinder our understanding of the tectonic evolution of this area. LA-ICPMS U–Pb age, trace element and Hf isotope compositions of zircons of a granitic gneiss and an eclogite from the Xinxian UHP unit in the Hong’an area were analyzed to constrain the age of the UHP metamorphism. Most zircons are unzoned or show sector zoning. They have low trace element concentrations, without significant negative Eu anomalies. These metamorphic zircons can be further subdivided into two groups according to their U–Pb ages, and trace element and Lu–Hf isotope compositions. One group with an average age of 239 ± 2 Ma show relatively high and variable HREE contents (527 ≥ Lu_N ≥ 14) and ¹⁷⁶Lu/¹⁷⁷Hf ratios (0.00008–0.000931), indicating their growth prior to a great deal of garnet growth in the late stage of continental subduction. The other group yields an average age of 227 ± 2 Ma, and shows consistent low HREE contents and ¹⁷⁶Lu/¹⁷⁷Hf ratios, suggesting their growth with concurrent garnet crystallization and/or recrystallization. These two groups of age are taken as recording the time of prograde HP to UHP and retrograde UHP–HP stages, respectively. A few cores have high Th/U ratios, high trace element contents, and a clear negative Eu anomaly. These features support a magmatic origin of these zircon cores. The upper intercept ages of 771 ± 86 and 752 ± 70 Ma for the granitic gneiss and eclogite, respectively, indicate that their protoliths probably formed as a bimodal suite in rifting zones in the northern margin of the Yangtze Block. Young Hf model ages (T _DM1) of magmatic cores indicate juvenile (mantle-derived) materials were involved in their protolith formation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

河南桐柏老湾花岗岩体锆石SHRIMP U-Pb年龄及其地质意义

通过对河南桐柏老湾花岗岩体开展锆石SHRIMP U-Pb测年,获得了一个高精度的U-Pb年龄(132.5±2.4)Ma,比较可靠地限定了老湾花岗岩体的形成时代属于燕山中期,而不是前人所认为的燕山晚期.结合区域构造-岩浆活动时间,认为在燕山中期,桐柏及其邻区存在次比较重要的构造-岩浆事件,老湾花岗岩体是这次构造-岩浆活动事件的产物.     

浙江省长兴县煤山剖面二叠—三叠系过渡地层中的黑碳记录及其地质意义

首次报道了浙江煤山二叠-三叠系界线地层中黑碳的含量及其碳同住素的变化特征。黑碳含量在26层存在一个明显的峰值,含量高达0．51％。黑碳与总有机碳比值从25层底部开始持续升高,在26层达到最高,稳定在0．40以上。黑碳的碳同位素在24层和25层之间有一个陡然的降低,降低幅度达2‰,在25和26层中则存在一个幅度达3‰的缓慢降低,总降低幅度达5‰。黑碳是动植物和化石燃料燃烧的天然记录,浙江煤山二叠-三叠系界线附近黑碳特征反映了二叠纪末期陆地生态系统发生了突然的衰退,发生了强烈的天然大火。根据事件层大火燃烧的长期性或频繁的特征,以及黑碳同位素大幅度陡然降低和缓慢降低,认为燃烧源除了陆地植被外,还有其他富含轻碳的化石燃料,即大火的燃烧源除了植被外,还可能有煤和甲烷水合物等。浙江煤山剖面的黑碳记录,反映了二叠-三叠纪之交地球陆地环境的剧烈变化,有助于理解和揭示生物大灭绝的过程和原因。     

滇西南澜沧江结合带北段云县花岗岩的地质特征及形成环境

滇西南澜沧江结合带云县花岗岩体的岩石类型主要为黑云二长花岗岩,SiO2含量平均为68.57%,K2O/Na2O值平均为1.67,相对富钾,岩石属高钾钙碱性系列,岩石酸、碱度低于同类岩石平均值,而镁铁组分高于平均 值,显示岩石偏中性,与同碰撞构造环境形成的花岗岩特征类似.Al2O3含量较高,平均为13.66%,A/CNK平均为1.1,呈铝过饱和,CIPw计算结果均出现标准矿物刚玉分子(105).岩石总体上相对富集大离子亲石元素,亏损高场强元素.稀土元素总量较高,平均为240.75×10-6,轻稀土元素富集,重稀土元素亏损,(La/Yb)N为8.88～9.41,分异不是很大,Eu为中等负异常,銭u为0.52～0.57.经多种相关图解判别,岩石属S型花岗岩,其构造环境相当于大陆碰撞花岗岩类(CCG).锆石颗粒U-Pb测年结果显示,源岩的形成年龄最晚是晋宁期(778 Ma),岩体主体形成于华力西晚期一印支期.其中岩浆成因锆石样品的206Pb.238U和207Pb/235U年龄分别为49 Ma和61 Ma,反映在云县岩体中可能存在喜马拉雅期岩浆活动.     

珠江口东岸池养鲻鱼的年龄与生长

研究池养条件下鲻鱼ＭｕｇｉｌｃｅｐｈａｌｕｓＬｉｎｎａｅｕｓ的年龄和生长特性，结果表明，鳞片新年轮主要在１０—１月出现；鳞长与体长关系式为：Ｒ—０．００９０７Ｌ（０．７７６４）；Ｉ—Ｖ龄鱼体长和体重相对生长率和生长指标随着年龄增长而逐渐下降；体长与体重关系式为：Ｗ＝１．２７１６×１０（－５）Ｌ（３．０６９５），体长与全长关系式为：ＬＴ＝１０．３７１１＋１．１８０６ＬＢ，当年鱼体长和体重生长与月龄的关系分别为：ＬＢ＝８．６６６９＋２５．５７６９ｔ，Ｗ＝０．１１７０ｔ（３．５５３０），ｖｏｎＢｅｒｔａｌｌａｎｆｆｙ生长参数Ｌ∞＝６１３．２５ｍｍ，Ｋ＝０．３４１２，ｔ０＝－０．８２５，体重生长拐点值为２．４６ａ。     

Sensitivity to stress of the estuarine bivalve Macoma balthica from areas between the Netherlands and its southern limits (Gironde)

Variation in the sensitivity to stress of Macoma balthica was measured in several French and Dutch estuaries. For adult and juvenile Macoma balthica exposed to copper under conditions of starvation, differences in mortality rate, condition, glycogen, burrowing rate and copper content were assessed. No significant differences were observed between adults and juveniles; the influence of treatment and origin was always evident. Animals from the most southern estuaries, Loire and Gironde, near to the species's southern limit of distribution, showed, in the field, the strongest deviations for the ecophysiological traits measured, and were in the experiments the most sensitive to stress.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Depth- and current-induced effects on wave propagation into the Altamaha River Estuary, Georgia

A study of sea surface wave propagation and its energy deformation was carried out using field observations and numerical experiments over a region spanning the midshelf of the South Atlantic Bight (SAB) to the Altamaha River Estuary, GA. Wave heights on the shelf region correlate with the wind observations and directional observations show that most of the wave energy is incident from the easterly direction. Comparing midshelf and inner shelf wave heights during a time when there was no wind and hence no wave development led to an estimation of wave energy dissipation due to bottom friction with corresponding wave dissipation factor of 0.07 for the gently sloping continental shelf of the SAB. After interacting with the shoaling region of the Altamaha River, the wave energy within the estuary becomes periodic in time showing wave energy during flood to high water phase of the tide and very little wave energy during ebb to low water. This periodic modulation inside the estuary is a direct result of enhanced depth and current-induced wave breaking that occurs at the ebb shoaling region surrounding the Altamaha River mouth at longitude 81.23°W. Modelling results with STWAVE showed that depth-induced wave breaking is more important during the low water phase of the tide than current-induced wave breaking during the ebb phase of the tide. During the flood to high water phase of the tide, wave energy propagates into the estuary. Measurements of the significant wave height within the estuary showed a maximum wave height difference of 0.4 m between the slack high water (SHW) and slack low water (SLW). In this shallow environment these wave–current interactions lead to an apparent bottom roughness that is increased from typical hydraulic roughness values, leading to an enhanced bottom friction coefficient.     

A Numerical Study on the Structure and Dynamics of Turbulence in Oscillatory Bottom Layer Flow over A Flat or Rippled Bed

1 .IntroductionUnder the influence of surface waves ,sandripples often appear on beaches . Whenthe amplitudeof water oscillationis sufficientlylarge ,vortices are formed onthe lee of every sand ripple crest . A-mongthese vortices ,the most important are t…