航空磁测在黑龙江伊春地区夕卡岩型锌多金属矿的找矿应用

依据1：5万高精度航磁异常和地质特征进行选区,结合1：2万综合物化探查证技术,在小兴安岭伊春地区航磁异常区发现了夕卡岩型锌多金属矿,体现了航空磁测技术在夕卡岩型多金属矿找矿中的适用性.查证结果认为,下寒武统含大理岩地层与侵入岩接触部位航磁异常区是重要的夕卡岩型多金属矿找矿靶区,赋矿部位显示低阻高极化地球物理特征;土壤地球化学特征表现为地层与侵入岩接触部位存在Ag、As、Sb、Mo、W、Bi、Pb、Cu、Zn元素组合异常,异常套合好,Sb异常值高,出现于内带,Zn常见于中带.     

鲁西齐河地区铁矿控矿特征及找矿标志

山东省齐河县境内发育有矽卡岩型铁矿,近年来该区铁矿勘查和研究工作取得了较大进展。本文通过对研究区内铁矿勘查研究成果进行统计分析,旨在对其控矿特征和找矿标志进行探讨来促进该区铁矿找矿工作。研究区内铁矿控矿地层为奥陶纪碳酸盐岩和石炭纪-二叠纪碎屑岩地层,成矿地质体为燕山晚期中基性侵入岩体;铁矿体主要赋存于地层和岩体的接触带处,且在碳酸盐岩、碎屑岩地层中和侵入岩体中也赋存有部分铁矿体。区内铁矿体赋存类型多样,其中以接触带赋存式为主,且含有断裂充填式、层间充填式、裂隙贯入式、捕虏体构造式等。铁矿体形态复杂,呈层状、似层状、囊状、透镜状等;矿床典型蚀变分带特征为闪长岩带-蚀变闪长岩带-内矽卡岩带-铁矿体-外矽卡岩带-大理岩化带-灰岩带。该区成矿作用以接触扩散交代作用、接触渗滤交代作用为主,此外还有富矿热液充填作用等。研究区内铁矿找矿标志主要包括地层标志（奥陶纪碳酸盐岩和石炭纪-二叠纪碎屑岩地层）、岩体标志（中基性侵入岩体,且发育有钠长石化的蚀变闪长岩）、构造标志（地层与岩体接触带、构造交汇部位、层间滑脱部位、脆性裂隙部位等）、围岩蚀变标志（磁铁矿化、矽卡岩化、钠长石化、蛇纹石化、金云母化等与成矿关系密切）、地球物理标志（明显的高值磁异常和化极磁异常部位、重力异常梯度带和高-低电阻转换带）。在今后铁矿勘查过程中,需要在综合研究该区控矿特征的基础上,可利用多种找矿标志进行相互配合、互为补充和综合研究,以期达到预期勘查效果。     

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.     

中国东部含金矽卡岩矿床分布规律 与深部地球物理背景研究

在收集整理中国大陆上十几条地学断面、数十条地震剖面、大地电磁剖面、地壳上地幔剪切波资料的基础上,对含金矽卡岩矿床的深部地球物理背景进行了深入的研究,作者认为岩石圈剪切带是控制含金矽卡岩矿床的最主要的深部地球物理背景条件。壳内低速高导层因与地幔流体分布有关,同样对含金矽卡岩矿床有控制作用、大（ 深） 断裂带的交汇部位控制着与矿有关的中酸性侵入岩浆,可以利用这些因素的共同制约作用进一步圈定含金矽卡岩矿床和铜伴生金矽卡岩矿床分布的远景预测区。     

Genesis of the Kamioka Skarn Deposits: An Important Role of Clinopyroxene Skarn and Graphite-bearing Limestone in Precipitating Sulfide Ore

Abstract: A genetical relationship between skarn formation and mineralization is investigated for the Kamioka skarn deposits which are the largest Zn-Pb producer in Japan. In the Mozumi deposit, one of main deposits in the Kamioka mining area as well as Tochibora and Maruyama, clinopyroxene skarn was generally subjected to later replacement by garnet or magnetite–calcite–quartz during the Zn-Pb mineralization. The replacement of hedenbergitic clinopyroxene by andraditic garnet resulted in the formation of diopsidic clinopyroxene relicts. With the progress of replacement, the S/So value (So: an estimated area occupied by an original clinopyroxene grain in a thin section, S: a total area of relict clinopyroxene fragments) which is an index of the degree of replacement decreases from 0. 7 to 0. 1, and the hedenbergite mole percent of relict clinopyroxene decreases drastically from about 65 to less than 40. A close association of andraditic garnet and sphalerite suggests that heden-bergitic clinopyroxene skarn played an important role to reduce the relatively oxic ore-forming fluid enriched in Zn²⁺ and SO4^2– and to precipitate sphalerite from the fluid. Ferrous iron in the hedenbergitic clinopyroxene skarn was oxidized to form andraditic garnet. Besides this garnet formation, the mineral assemblage of magnetite–calcite–quartz replaced the clinopyroxene skarn at the time of mineralization. In both cases, the reduction of relatively oxic ore-forming fluid by hedenbergitic clinopy-roxene skarn at the later stage brought about the precipitation of sulfide minerals. In contrast, these types of later replacement are not found in the Tochibora deposit. Instead, graphite-bearing crystalline limestone and relatively fresh clinopyroxene skarn are common. Mineralized clinopyroxene skarn has high graphite carbon contents relative to barren one, suggesting that the amount of graphite in the skarn was an important controlling factor for mineralization. It is very likely that the graphite played a role of reducing agent during the mineralization in the Tochibora deposit.     

基底摇摆运动作用下伸臂结构的地震内力上界

本文推演出基底摇摆运动作用下刚度任意分布的伸臂结构的上界地震剪力和弯矩计算公式。     

SHORT COMMUNICATIONS FLEXURAL CAPACITY OF EDGE LOADED ANNULAR FOUNDATIONS

Edge loaded annular foundations have been analysed assuming the soil pressure at the contact to be non-uniform using the lower bound approach of Limit Analysis. Variable fixity at the edges has been allowed and the foundation slab is made to follow the Square yield criterion. Results presented in the form of curves can be readily used to obtain the locations of the yield hinge circles for the given slab and the corresponding collapse load. © 1997 John Wiley & Sons, Ltd.     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.     

边坡加固的抗震性能参数分析

传统基于瑞典法的边坡加固抗震性能参数分析,通过建立强度参数与临界滑动面对应关系完成推导,由于因荷载过大,边坡建筑物抗震性能降低,准确率不高等问题,提出新的边坡加固抗震性能参数分析方法,对边坡加固的抗震性能参数进行分析,更好地通过加固提高其抗震性能。运用新型边坡加固抗震性能参数分析方法,采用基于极向条分的极限分析上限法和非线性Mohr-Coulomb破坏准则,分析边坡加固措施对边坡抗震性能的影响,通过对比有、无加固措施状态下不同能量功率的运算确定边坡抗震性能,利用MATLAB软件获取边坡加固抗震性能参数的最优解。经实验证明,边坡潜在破坏范围受边坡坡顶受荷和边坡加固情况的作用较大,地震荷载系数及非线性系数越大,土体强度非线性越小,边坡抗震性能受地震荷载的作用也越大。边坡抗滑桩最优抗震支护方位位于X_F/L_x=0.7处,在地震荷载从0上升至0.2的情况下,非线性系数为1.2、1.4、1.6以及2.0时的边坡抗震性能分别下降了40.1%、46.8%、57.5%以及61.5%。新型的抗震性能参数分析方法有效地提高了结果准确率,对边坡加固的抗震性能能达到准确分析。     

LA-ICP-MS石榴子石U-Pb定年方法在异剥钙榴岩和矽卡岩年代学研究中的应用

本文利用Coherent GeoLasHD型193 nm ArF准分子激光剥蚀系统和Agilent 7900型四极杆电感耦合等离子体质谱仪, 建立了LA-ICP-MS石榴子石U-Pb定年方法。利用该方法, 对采自冀北地区晚古生代镁铁质-超镁铁质混杂岩体中的异剥钙榴岩和闽西南马坑式铁矿含矿石榴子石矽卡岩这两种岩石中的石榴子石开展U-Pb定年研究。在冀北地区晚古生代镁铁质-超镁铁质混杂岩体中的异剥钙榴岩中, 获得石榴子石下交点年龄为(387.6±5.4) Ma (D496-1, MSWD=1.1, N=30)和(409.3±7.8) Ma (D493-1, MSWD=2.0, N=60), 在马坑铁矿石榴子石矽卡岩中, 获得石榴子石下交点年龄为(128.6±2.1) Ma (ZK7921-b24, MSWD=2.0, N=60)和(128.7±3.2) Ma (ZK7922-b1, 用锆石91500校正, MSWD=1.8, N=42); 在潘田铁矿的石榴子石矽卡岩中, 获得石榴子石的下交点年龄为(128.7±1.7) Ma (PT-b1, MSWD=1.7, N=30)和(132.1±1.3) Ma (PT-b1样品, 用锆石91500校正, MSWD=1.6, N=30)(除了指明使用锆石标样91500校正石榴子石未知样品外, 其他皆用石榴子石标样Willsboro校正石榴子石未知样品的U/Pb分馏)。以上结果与Sm-Nd等时线年龄及前人报道的锆石U-Pb年龄在误差范围内一致。对马坑式铁矿石榴子石矽卡岩U-Pb定年结果表明, 利用石榴子石标样Willsboro和锆石标样91500作为外标样校正同一样品中石榴子石U/Pb同位素分馏, 获得的下交点年龄一致, 206Pb/238U年龄的加权平均值也一致, 说明石榴子石与锆石之间的基体效应较小, 在缺乏石榴子石标样时, 可用锆石标样91500代替。在上述研究基础上分析了石榴子石U-Pb定年方法在矽卡岩型矿床成矿时代研究及异剥钙榴岩年代学研究中的应用潜力, 认为石榴子石U-Pb定年方法在矽卡岩型矿床及异剥钙榴岩年代学研究中具有巨大的应用推广前景, 具有重要的理论指导和实际应用意义。