晚中生代─新生代南海周缘地块运动与南海演化

报道了由华南几个盆地的古地磁数据综合而得的反映该区白垩纪以来古纬度变化曲线，结合Ｓｃｈｍｉｄｔｋｅ等（１９９０）发表的加里曼丹１５０Ｍａ以来的古地磁数据，表明华南与加里曼丹在４０Ｍａ前具有大致相同的古纬度变化史，差异仅出现在距今３０Ｍａ前后和１０Ｍａ以来。若此趋势可靠，则可作出下列推断：（１）南海的扩张只能发生在距今３０Ｍａ附近或１０Ｍａ以后华南与加里曼丹反向运动时期；距今３０Ｍａ的扩张已被广为接受；（２）华南与加里曼丹之向可能存在的古南海只能在９１Ｍａ之前存在；（３）南海演化可能存在两期扩张。南海的拟合可通过沿３５００ｍ等深线的先道时针旋转、后北向平移两个步骤完成。这与Ｈａｙａｓｈｉｄａ等（１９９１）提出的日本海张开与扩张模式很相似，提示东亚边缘海的形成和演化可能具有同样的机制。华南距今５０Ｍａ以来的古纬度变化与Ｔａｐｐｏｎｎｉｅｒ（１９８２）的传播挤出构造模式所预期的基本吻合，表明距今５０Ｍａ以来华南古纬度变化的运动学机制可用Ｔａｐｐｏｎｎｉｅｒ模式作解释。     

基于ANUSPLIN的京津冀区域逐日气温格点数据集建立方法研究

为建立一个高精度、高空间分辨率的逐日气温格点数据集,满足公共气象服务对于精确信息及实时信息的需要,利用2018年6—8月京津冀区域以及临近省区共3 974个国家级及区域气象观测站质控后的逐日气温资料,采用ANUSPLIN软件对逐日气温数据进行空间内插,得到了京津冀区域逐日气温格点数据集(0.01°×0.01°),并分别利用反距离权重插值法、普通克里金插值法、样条函数法对逐日气温数据进行空间插值,采用相关系数(Corr)、平均绝对误差(MAE)、平均相对误差(MRE)等作为评估指标来检验插值精度。结果表明:1) ANUSPLIN软件满足了空间插值对精度及曲面平滑度的要求,能直观体现京津冀区域气温由北向南递增的空间分布特征; 2) 4种插值方法中,基于ANUSPLIN软件的插值结果最优,相关系数平均达0.97,其样本误差在1℃之内占比为90.59%,MAE为0.46℃,MRE为1.81%; 3)插值误差较大的区域位于冀北高原、燕山丘陵及太行山脉一带,高海拔、低站点密度等是造成插值误差的主要原因。基于ANUSPLIN插值方法建立的逐日气温格点数据集具有分辨率高、空间插值误差小的优势,ANUSPLIN对气温的空间分布具有较好的预测能力。     

华南三水盆地白垩纪—早第三纪古纬度漂移与南海演化

本文主要依据三水盆地古地磁数据所反映的华南地块的古纬度漂移讨论南海的演化模式。结果认为,华南在南海的形成演化中居主导地位,南海基本上是晚白垩世至中新世期间通过华南的南漂及其后的北向回漂过程中,华南大陆南部的拉张、断裂、解体并自东向西扩展的方式形成的,而南海中散布的微大陆碎块则是在华南回漂时被滞留下来的。演化过程中,其周缘菲律宾岛弧自南向北漂,直到上新世后才构成南海的东界;印支地块则仅起转换边界作用;加里曼丹则基本土没有明显的漂移。     

尼罗罗非鱼对不同颜色定置网片的反应特性

本文初步研究了尼罗罗非鱼对红、黄、绿、蓝、青灰色定置网片反应特性,并探讨了该鱼对青灰色网片的适应特性。结果表明:绿色网片对罗非鱼的阻拦作用最大,青灰色网片次之,红、黄色网片再次,蓝色网片最小。罗非鱼对青灰色网片具明显的适应现象,它们完成整个适应过程所需的实验重复次数约为7次。     

GNSS在断层形变研究中的应用

Great earthquakes often occur along or near active fault belts. Thus, monitoring and research on fault deformation are quite important. Methods such as short-leveling, short- baseline and integrated monitoring profile across fault belts have been used to monitor fault activities for many years. GNSS observations are mainly used to obtain the horizontal velocity field in large areas and to study the activities and deformation of major blocks. GNSS technology has been used to monitor and study the deformation of faults from a different aspects, In this paper, some applications and new explorations of GNSS are discussed. They are： （1） Research and monitoring of strike-slip activities of faults with GNSS. （2） Research and monitoring of vertical activities of faults with GNSS. （3） Investigating the laws of deformation of blocks on the sides of fault zone and setting up strain models to deduce the activities and deformation of faults with respective models and compare the deduced results with the actual measurements across fault. It is concluded that a larger discrepancy between the deduced and the observed deformation indicates a stronger interaction between the blocks, which can be important for predicting the location of a strong earthquake and assessing seismic hazard, as well as the seismicity trend.     

基于粗规则对象空间信息表的最小规则集生成

提出了粗规则对象空间信息表的概念、相关概念和性质，并给出实现粗规则最小化算法。基于此，编写了相应的计算机程序，并对一个地理信息系统实例规则进行了研究。实例表明运行可靠、结果正确，可应用于智能决策信息系统的知识库优化。     

Adaptive Predictive Inverse Control of Offshore Jacket Platform Based on Rough Neural Network

The offshore jacket platform is a complex and time-varying nonlinear system,which can be excited of harmful vibration by external loads.It is difficult to obtain an ideal control performance for passive control methods or traditional active control methods based on accurate mathematic model.In this paper,an adaptive inverse control method is proposed on the basis of novel rough neural networks (RNN) to control the harmful vibration of the offshore jacket platform,and the offshore jacket platform model is established by dynamic stiffness matrix (DSM) method.Benefited from the nonlinear processing ability of the neural networks and data interpretation ability of the rough set theory,RNN is utilized to identify the predictive inverse model of the offshore jacket platform system.Then the identified model is used as the adaptive predictive inverse controller to control the harmful vibration caused by wave and wind loads,and to deal with the delay problem caused by signal transmission in the control process.The numerical results show that the constructed novel RNN has advantages such as clear structure,fast training speed and strong error-tolerance ability,and the proposed method based on RNN can effectively control the harmfid vibration of the offshore jacket platform.     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

鄂尔多斯盆地北部塔巴庙地区下石盒子组盒3段储层特征及有利区块预测

根据野外剖面、钻井岩芯和测井等资料,系统地对塔巴庙地区下石盒子组盒3段储集砂体的岩石学特征、孔隙类型、成岩作用以及物性进行了详细的分析。研究表明,储集层的成分和结构成熟度低;主要孔隙类型有粒间孔、粒内溶孔、晶间溶孔、铸模孔和粒缘缝;孔隙度为0.7%~18.69%,平均值为7.82%;渗透率为0.008×10^-3μm²~23.01×10^-3μm²,平均值为1.111×10^-3μm²,属于物性中-偏低的微孔-溶孔型组合型储集岩。影响储集层的主控因素包括:(1)河道控制了优质储层的分布范围和规模;(2)成岩期早期环边绿泥石胶结、溶蚀等建设性成岩作用是形成储层的基础;(3)成岩相扩大了储层的分布范围,改善了储层的物性。在上述研究的基础上,结合储集砂体的沉积微相特征、物性平面展布特征、储集砂体成岩相特征,在研究区内圈定了Ⅱ、Ⅲ两类有利勘探区块,为研究区下一步的勘探、开发提供了科学依据。     

双轴应力下非贯通节理岩体压缩损伤本构模型

针对目前节理岩体损伤变量定义中大多仅考虑节理长度、倾角等几何性质,而未考虑节理抗剪强度等力学性质的不足,基于断裂力学中的由于单个节理存在引起的附加应变能增量与损伤力学中的损伤应变能释放量相关联的观点,推导出了在双轴应力下含单条非贯通闭合节理岩体的损伤变量计算公式,并根据断裂力学理论对双轴压缩荷载下的单个节理尖端应力强度因子计算方法进行了研究,得出了应力强度因子KⅠ、KⅡ的计算公式;同时考虑多节理间的相互作用,给出了单组单排及单组多排非贯通节理尖端应力强度因子计算公式,由此建立了相应的节理岩体双轴压缩损伤本构模型,并利用该模型进行了相应的算例分析。结果表明：对含单条非贯通闭合节理的岩体而言,当节理倾角小于其内摩擦角时,岩体强度与完整岩石相同,岩体损伤为0,而后随着节理倾角增加,岩体强度、损伤随节理倾角的变化分别呈开口向上及向下的抛物线,当节理倾角约为60°时,岩体损伤最大,强度最低。随着节理长度增加,岩体损伤增加,而随着节理内摩擦角的增加,岩体损伤则减小;对含单组单排非贯通闭合节理的岩体而言,当节理总长度一定时,随着单条节理长度的减小及节理条数的增加,岩体损伤则逐渐减小,但其减小幅度与节理条数并不呈线性关系。