陕西渭北东部区新生代伸展构造网络系统对奥灰水的控制作用

本文以新活动论构造观和系统论为指导,建立了渭北东部区新生代伸展构造系统模式,并以岩体结构控制论为基础,系统地讨论了本区构造网络系统对奥陶系灰岩的空间分布、奥陶系灰岩地下水水文地质单元的边界条件、奥灰水单元的补、径、排特征及其富集等方面的控制作用以及宏观指导意义。最后,系统地提出了导水构造网络系统控水的实质。      

土壤中钙形态的连续浸提方法

通过改进的连续浸提技术，把土壤钙的赋存形态划分为5个类型：水溶态、交换态、酸溶态、有机结合态及残渣态，用原子吸收光谱法测定各形态钙含量及总钙量，各形态钙的加和值与测得的总钙量基本相符，且各形态钙8次浸提的相对标准偏差基本在10％以内。探讨了改进的连续浸提方法提取条件（包括浸提剂、水土比、提取时间、离心速率及离心时间等）对提取效果的影响。结果表明，土壤中各形态钙可以满足生态地球化学土壤样品评价需要。     

贵州喀斯特地区碳酸盐岩表生古菌群落结构及多样性研究——以南江大峡谷为例

为了研究贵州喀斯特地区碳酸盐岩表生古菌群落结构的多样性,应用16S rDNA文库技术,对采集于贵州南江大峡谷的白云岩和石灰岩样品进行基因文库的构建和限制性片段长度多态性(RFLP)分析。用限制性核酸内切酶MspⅠ对两个文库中分别随机挑选的300个阳性克隆子进行酶切分型,白云岩和石灰岩16S rDNA基因文库各得到14和13个基因型,其覆盖率分别为95.4%和91.3%,香农指数分别为2.14和1.93。系统发育分析表明白云岩和石灰岩表生古菌克隆子全部归属于泉古菌门（Crenarchaeota）,代表性克隆与GenBank数据库已有16S rRNA序列的相似性为96%～100%,且最高相似性序列均来源于土壤及岩石环境的未可培养古菌序列。      

淮北煤田太原组灰岩水年龄及同位素地球化学特征

为了解淮北煤田太原组灰岩水年龄、水化学特征及演化,采集了淮北煤田29个矿井地下水样品进行水常规、氢氧同位素及~(14)C测试。利用传统图示及统计方法探讨了地下水化学特征及演化,约束了地下水年龄及径流特征。结果表明:淮北煤田太原组灰岩水年龄在2900～21910 a之间变化,不同矿区之间灰岩水化学特征有明显差异。闸河矿区以较低的TDS浓度、最小的地下水年龄和最高的δD和δ~(18)O值为特征,为淮北煤田太原组灰岩水主要的补给区;临涣矿区孙疃矿、宿县矿区桃园矿具有较大的地下水年龄、较高的TDS浓度和低的δD和δ~(18)O值,为主要排泄区。TDS浓度等值线图和地下水年龄等值线图呈现一致的演化规律,淮北煤田东北部闸河矿区为主要补给区。太原组灰岩水径流特征主要受构造背景的控制,地下水补给条件及水岩相互作用程度决定了水体中TDS浓度和氢氧同位素富集特征。     

Differential Diagenesis of Limestone-Marl Alternations

灰岩-泥灰岩韵律层包括结核状灰岩到灰岩和泥灰岩互层,广泛分布在陆棚及深海环境中,出现于各地质时期,是研究高分辨率地层学和环境恢复的理想工具.但是成岩作用在灰岩-泥灰岩韵律层形成过程中的作用一直存在分歧,有的学者认为差异化学压实成岩作用加强了原始沉积的差异,有的学者认为成岩作用不仅能够强烈歪曲原始环境特征,还可以通过自身成岩作用形成与原始沉积特征类似的现象.灰岩-泥灰岩韵律层中的差异成岩作用是指泥灰岩中的不稳定碳酸盐矿物在海底成岩环境中经过溶解、迁移和在灰岩中再沉淀,导致灰岩层没有明显被压实,而泥灰岩层受到明显压实.本文重点评述了差异成岩作用发生的环境和过程,并对与之相关的胶结物来源问题和有机质在早期成岩过程中的作用进行了讨论.并以华南中二叠统栖霞组韵律层为例,探讨了差异成岩作用在其形成过程中的作用,最后对以后的研究方向进行了展望.     

灰岩冻融循环的劣化规律研究

基于岩石损伤理论推导了冻融循环作用下岩石的损伤劣化模型,并采用冻融循环试验方式测试了后崴子隧道灰岩岩样冻融循环后的物理力学特征变化规律,分析了其损伤劣化规律。获得了岩样的质量、纵波波速随冻融循环呈现先增后减的趋势,单轴抗压强度持续减小,弹性模量和峰值应变逐渐增大的结果。分析获得了冻融循环作用下灰岩总损伤变量与应变的关系,冻融和载荷的共同作用会使总损伤加剧,但损伤曲线表明耦合作用也可适当缓解这一影响,且灰岩应变值趋于一致,表明影响灰岩强度极限的主要因素可以不考虑冻融循环。     

NONMETALS DEPOSITS

正20140876 Gao Junbo(College of Resources and Environmental Engineering,Guizhou University,Guiyang 550025,China);Yang Ruidong Study on the Strontium Isotopic Composition of Large Devonian Barite Deposits from Zhenning,Guizhou Province(Geochimica,     

Re-evaluation of the Cablac Limestone at its type area, East Timor: Revision of the Miocene stratigraphy of Timor

The Cablac Limestone, widely recorded in Timor, has its type area on Cablac Mountain where it was regarded as a Lower Miocene shallow-marine carbonate-platform succession. The Bahaman-like facies placed in the Cablac Limestone are now known to belong to the Upper Triassic–Lower Jurassic rather than the Lower Miocene. On the northern slopes of Cablac Mountain, a crush breccia, formerly regarded as the basal conglomerate of the formation, is now considered to have developed along a high-angle fault separating Banda Terrane units of Asian affinity from an overthrust limestone stack containing units belonging to the Gondwana and Australian-Margin Megasequences. The Cablac breccia includes rock fragments that were probably derived locally from these tectonostratigraphic units after terrane emplacement and overthrusting. Clasts include peloid and oolitic limestones of the Upper Triassic–Lower Jurassic derived from the Gondwana Megasequence, deep-water carbonate pelagites of the Cretaceous and Paleogene derived from the Australian-Margin Megasequence, Upper Oligocene–Lower Miocene (Te Letter Stage) shallow-water limestone derived from the Banda Terrane, and a younger Neogene calcarenite containing clasts of mixed tectonostratigraphic affinity. There is no evidence for significant sedimentary or tectonic transport of clasts that form the breccia. The clast types and the present understanding of the geological history of Timor suggest that the crush breccia formed late in the Plio-Pleistocene uplift history of Timor. It is not the basal conglomerate of the Cablac Limestone. However, the clasts of an Upper Oligocene–Lower Miocene limestone found in the breccia suggest that a shallow-marine limestone unit of this age either outcrops in the region and has not been detected in the field, or has been eroded completely during late Neogene uplift. The clasts are similar in age and lithology to an Upper Oligocene–Lower Miocene formation that unconformably overlies a metamorphic complex in the Booi region of West Timor, similar to the Lolotoi Metamorphic Complex (Banda Terrane) that is juxtaposed against the crush breccia of Cablac Mountain. The Cablac Limestone at its type area includes a mixed assemblage of carbonate rock units ranging in age from Triassic to Plio-Pleistocene and representing diverse facies. As a formation, the name “Cablac Limestone” should be discarded for a Cenozoic unit. The Upper Oligocene–Lower Miocene shallow-water limestone unit that is typified by outcrops in the Booi region of West Timor, and that has contributed to clasts in the Cablac breccia, is informally named the Booi limestone. It is considered part of the allochthonous Banda Terrane of Asian affinity and represents the only shallow-marine Lower Miocene unit known from Timor. The only other Miocene sedimentary unit known from Timor includes carbonate pelagites – designated the Kolbano beds – probably deposited on an Australian continental terrace at water depths between 1000 and 3000 m. On the northeastern edge of Cablac Mountain, oolitic limestone and associated units of the Gondwana Megasequence, the Kolbano beds of the Australian-Margin Megasequence, and the Booi limestone and associated metasediments of the Banda Terrane were juxtaposed by a Plio-Pleistocene high-angle fault along which the Cablac crush breccia formed.     

塔河油田下奥陶统溶蚀段的测井响应

塔河油田位于塔里木盆地，为该盆地油气中储量最大，产量最高的油田。下奥隐统是塔河油田最重要的储集层段，而下奥陶统中溶蚀成因的孔洞又是该层段最主要的储集空间。通过对该溶蚀段的研究，笔者认为该溶蚀段具有可以识别的测井响应，其密度呈指状急剧降低，是溶蚀段最明显的特征，并以此与中上奥陶统的瘤状灰岩形成明显区别。     

Exploring the influence of loading geometry on the plastic flow properties of geological materials: Results from combined torsion + axial compression tests on calcite rocks

For technical reasons, virtually all plastic deformation experiments on geological materials have been performed in either pure shear or simple shear. These special case loading geometries are rather restrictive for those seeking insight into how microstructure evolves under the more general loading geometries that occur during natural deformation. Moreover, they are insufficient to establish how plastic flow properties might vary with the 3rd invariant of the deviatoric stress tensor (J₃) which describes the stress configuration, and so applications that use those flow properties (e.g. glaciological and geodynamical modelling) may be correspondingly compromised. We describe an inexpensive and relatively straightforward modification to the widely used Paterson rock deformation apparatus that allows torsion experiments to be performed under simultaneously applied axial loads. We illustrate the performance of this modification with the results of combined stress experiments performed on Carrara marble and Solnhofen limestone at 500°–600 °C and confining pressures of 300 MPa. The flow stresses are best described by the Drucker yield function which includes J₃-dependence. However, that J₃-dependence is small. Hence for these initially approximately isotropic calcite rocks, flow stresses are adequately described by the J₃-independent von Mises yield criterion that is widely used in deformation modelling. Loading geometry does, however, have a profound influence on the type and rate of development of crystallographic preferred orientation, and hence of mechanical anisotropy. The apparatus modification extends the range of loading geometries that can be used to investigate microstructural evolution, as well as providing greater scope for determining the shape of the yield surface in plastically anisotropic materials.