锚定式方钢管混凝土柱与钢梁节点抗震性能试验研究

通过低周反复加载试验对6个锚定式方钢管混凝土柱-H形钢梁节点进行了试验研究,研究了不同轴压比情况下节点的破坏模式、延性、耗能性能、强度及刚度退化等。试验结果表明,破坏之前节点具有良好的滞回性能、延性及耗能能力,满足现行抗震规范的要求。锚定式方钢管混凝土梁柱节点可以用于拉力较小的节点。文中提出了有关的设计建议。     

耦合地震动下地铁车站的动力响应研究

耦合地震动对地铁车站结构的响应较为复杂,本文运用有限单元法进行动力时程分析,研究地铁车站结构承受水平、竖向和双向耦合地震动作用下的动力响应规律.结果表明:(1)耦合地震动对结构相对水平位移影响较小,但对结构的相对竖向位移影响较大.(2)耦合地震动会减小中柱主应力值,但并未较大程度上改变中柱主应力值大小分布情况.(3)车...     

克里雅河尾闾圆沙三角洲古河道剖面所记录全新世古绿洲环境变化

塔克拉玛干沙漠腹地克里雅河沿岸的古绿洲与人类活动遗迹丰富,伴随着河流的变迁,遗址印记了古代文明的消失,河道成为孕育绿洲的证据.在浩瀚的沙漠中,古代文明与古绿洲属于依附关系.以圆沙古城为代表的圆沙古三角洲绿洲是孕育沙漠文明的典型.采自圆沙古城北侧深度约11 m的沉积剖面(KYN22),光释光测年和沉积学分析结果所示,剖面...     

Cavity expansion analyses of crushable granular materials with state‐dependent dilatancy

Crushability is one of the important behaviors of granular materials particularly under high stress states, and affects both the deformability and strength of the materials that are in essence associated with state‐dependent dilatancy. In this presentation, first, a new critical state model is proposed to take into account the three different modes of compressive deformation of crushable granular materials, i.e. particle rearrangement, particle crushing and pseudo‐elastic deformation. Second, the governing equations for cavity expansion in crushable granulates are introduced, in which the state‐dependent dilatancy as well as the bounding surface plasticity model are used. Then, the procedure to obtain semi‐analytical solutions to cavity expansion in the material is described in detail, in which a commercial differential equation solver is employed. Finally, cavity expansion analyses are carried out on Toyoura sand, a well‐documented granular material, to demonstrate the effects of crushability and state‐dependent dilatancy. The study shows that particle crushing does occur at both high stress and critical states and affects the stress fields and the deformation behavior of the material surrounding the cavity in association with state‐dependent dilatancy. This leads to conclusion that particle crushing and state‐dependent dilatancy have to be taken into account when cavity expansion theory is used to interpret cone penetration tests and pressuremeter tests. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.     

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.     

Particle manifold method (PMM): A new continuum‐discontinuum numerical model for geomechanics

Particle manifold method (PMM) is a new extension of the numerical manifold method (NMM). PMM uses a mathematical cover system to describe the motion and deformation of a particle‐based physical domain. By introducing the concept of particle into NMM, PMM takes the advantages of easy topological and contact operations with particles. In this article, the methodology, formulations and implementation of the method are presented, together with modelling examples for validation. It is found that good solutions for both continuous and discontinuous problems are obtained by the new developed PMM. Due to the underlying coupled continuum‐discontinuum property of PMM, it has great potential for modelling of geomechanical problems. Copyright © 2012 John Wiley & Sons, Ltd.     

单柱离子色谱测定二氧化锰产品中无机阴离子杂质

采用了单柱离子色谱法测ＭｎＯ２产品中无机离子杂质；提出了消除干扰的可行途径，将Ｌａ（ＯＨ）３加入后能同时消除进样峰的干扰和溶剂峰的出现。选用１．７５ｍｍｏｌ／Ｌ邻苯二甲酸１．７５ｍｍｏｌ／Ｌ三羟甲基氨基甲烷为混合淋洗剂测定Ｆ＾－，Ｃｌ＾－，ＮＯ３＾和ＳＯ＾２－４，其标准加入回收率为９５％－１０５％；ＲＳＤ（ｎ＝７）为２．４７％－８．０８％。     

长春台磁暴特征研究

依据长春地震台记录的磁暴资料,系统总结了第19、20、21三个太阳活动周磁暴特征,并对全球M_s≥7.8级地震的发生与太阳黑子活动、磁暴的关系进行了初步探讨。     

Identification and occurrence of novel C36–C54 3,4-dialkylthiophenes with an unusual carbon skeleton in immature sediments

A series of novel long-chain 3,4-dialkylthiophenes (C₃₆–C₅₄) was identified in a number of sediments ranging from Pleistocene to Cretaceous. The identifications were based on mass spectral characterisation, desulphurisation and mass spectral data of synthesised model compounds. These organic sulphur compounds are probably formed by sulphur incorporation into mid-chain dimethylalkadienes with two methylenic double bonds. These putative precursor lipids are unprecedented and may be considered rather unusual. The distribution of 3,4-dialkylthiophenes in sediments varies considerably with the depositional palaeoenvironment, indicating that these compounds have a potential as molecular markers reflecting changes in palaeoenvironment.