隧道穿越引起地下管线竖向位移的能量变分分析方法

隧道穿越引起的地层位移可能造成地下管线变形过大或断裂等事故,引起工程界的高度关注。基于假定的地下管线竖向位移分布模式,通过能量方法建立变分控制方程,提出了求解隧道穿越地下管线竖向位移的能量变分解法,运用叠加原理将单线隧道解答延拓至双线隧道中。与离心机试验和工程实例的对比,验证了方法的正确性。通过参数计算,分析了管材弹性模量、管线埋深、地层损失率等相关因素对地下管线竖向位移的影响规律,研究结论具有工程参考价值。     

既有桩基荷载对邻近浅埋隧道开挖效应及支护内力影响的研究

建立了包括地层模型、桩基荷载模型、浅埋隧道开挖模型和支护模型以及桩基荷载、地层压力、地层沉降、支护应变量测装置的平面应变模型试验系统;通过模型试验,研究了不同水平、竖向相对位置处的既有桩基荷载对附近浅埋隧道开挖引起的地层压力重分布、地层沉降及隧道支护内力的影响特征。另外,采用FLAC3D软件,对模型试验及不同工况进行了数值模拟。结果表明：（1）与没有桩基荷载的自由地层中的隧道开挖试验相比较,地层中的既有桩基荷载会明显地改变邻近浅埋隧道开挖引起的地层压力重分布、地层沉降及隧道支护内力;（2）对于桩径和水平相对距离都相同,但桩长不同的桩基荷载,桩长与隧道埋深比值为1.0时,对隧道开挖效应影响最大,二者比值小于1.0时,其影响程度随着比值的减小而减小,二者比值大于1.0时,桩长的改变对隧道开挖效应影响较小;（3）对于桩径和桩长都相同的桩基荷载,对地层压力、地层沉降及支护内力的影响随桩基荷载与隧道的水平距离的减小而增大,桩基荷载距隧道的水平距离与隧道直径比值介于0.5～4.0时,桩基荷载对隧道开挖效应影响较大,隧道较危险,比值介于4.0～6.0时,影响较小,比值＞6.0时,影响可以忽略不计。     

低地应力区地下洞室开挖围岩剪应力静态数值模拟研究

本文以西北某市大型水利地下洞室工程为例,采用弹塑性二维有限元法对低地应力区洞室开挖后围岩剪应力分布与围岩变形破坏进行了数值模拟,总结出了低地应力区地下洞室开挖后围岩剪应力大小、分布规律与围岩变形破坏的关系.该项研究它将有利于进一步研究低地应力区地下洞室开挖后围岩稳定性,同时对保障地下洞室工程的圆满进行具有重要的理论价值和现实意义.     

大型地下洞室不同开挖效应的动态仿真分析

针对云南锡业集团公司个旧锡矿地下采场洞室的开挖技术条件,采用非线性三维有限元法,对其动态开挖过程进行了仿真模拟分析,并优化选择了地下采场洞室的开挖顺序.结果表明,不同的开挖顺序,对围岩的稳定性具有显著的影响.     

丹巴水电站引水隧洞高地应力软岩段三维开挖方案优化研究

采用摩尔-库仑弹塑性模型的有限元分析方法和岩体开挖卸荷理论, 并考虑地应力对隧洞的作用机制,建立丹巴水电站双洞四机引水隧洞软岩段三维开挖大型三维模型并进行岩体力学计算,分别以不同的掌子面推进深度进行开挖,从洞口开挖至一定深度。统计不同掌子面推进深度下各步开挖不同关键点处的位移变化情况,进行比选,建议工程实际应当选用的最佳掌子面推进深度;在该推进深度下,统计不同洞段不同位置的各向位移预留量,为超前支护的必要性提供依据和超前支护的施工提供数据支持,以保证工程施工的顺利进行,为后续类似工程设计提供参考。     

Finite element analysis of steep excavation slope failure by CFS theory

The distribution of Coulomb failure stress (CFS) change in the steep excavation slope is calculated by finite element method in this paper, and the failure mechanics under different conditions have been investigated. Comparing the CFSs before and after the slope excavation (stress loading and unloading processes), the dangerous internal zone and the most likely failure external area are attained. Given the shear cracks on the top surface while tensile stress or cracks along the toe of the slope, we analyze the high cutting-angle steep slope in Kaixian county of the Three Gorges Reservoir region. We bring forward that the peak value of CFS after excavation can reach to the order of 0.1 MPa, which is greatly higher than that of before. Our preliminary results are useful for optimizing the reinforcement structure during the steep slope stabilization engineering.     

PLAXIS2D模拟计算基坑开挖工程的适用性分析

岩土工程有限元分析软件PLAXIS2D已经被广泛应用于基坑开挖的数值模拟计算中,但关于其模拟计算基坑开挖工程的适用性问题,目前还未见有相关文献进行深入分析.鉴于此,利用PLAXIS2D对3个实际深基坑开挖工程进行了数值模拟计算,通过计算结果与实测结果的对比,分析了PLAXIS2D在基坑开挖工程中的适用性;在此基础上,对应用PLAXIS2D进行基坑开挖数值模拟计算的适用条件进行了探讨,研究结论对正确应用PLAXIS2D进行基坑开挖工程的模拟计算具有较好的参考价值.     

圆柱孔收缩的线弹性-完全塑性解及其应用

针对隧道开挖引起的地层损失现象,将开挖过程简化为圆柱孔收缩问题,借鉴文献[1]关于圆柱孔收缩的计算方法引入临界状态土力学理论,给出了圆柱孔收缩问题的线弹性-完全塑性解析解,并结合隧道开挖的工程特点给出了地层损失比以及地表土体最大沉降与隧道支护压力之间的关系式。将该方法的计算结果与Grant的离心机试验实测结果进行了对比,并通过国内外的工程实例对该方法的计算结果进行了验证,证明计算结果准确合理,可为隧道开挖引起的土体变形分析提供借鉴。     

移动荷载作用下土岩组合基坑吊脚桩变形分析

以青岛地区特有的土岩组合地质条件为背景,采用现场监测和Plaxis有限元模拟相结合的方法,研究了土岩基坑中吊脚桩在龙门吊移动荷载作用下的变形规律及动力响应。结果表明：桩身变形模拟结果与实测值吻合较好,基坑的变形主要发生在基坑上部软弱土层,吊脚桩嵌岩处产生应力集中;在龙门吊移动荷载作用下,桩顶水平位移较大,但其动力响应最小,而嵌岩处水平位移较小,但其动力响应最大;嵌岩处、桩身最大正弯矩处及最大负弯矩处的土压力动力响应较大,且移动荷载刚经过时刻影响最大。研究成果可为类似土岩结合地区深基坑支护设计提供参考。     

“Transverse Action” – A model benchmark exercise for numerical analysis of the Callovo-Oxfordian claystone hydromechanical response to excavation operations

The Callovo-Oxfordian claystone (COx) is considered as a potential geological formation to host an industrial radioactive waste repository in France. A detailed understanding of the thermo-hydro-mechanical (THM) behavior of the COx is a key issue for design of different repository structures and the safety calculations of the project. More particularly, numerical modeling of induced fracture networks around drifts excavated at the main level of the Andra’s Meuse/Haut-Marne Underground Research Laboratory (M/HM URL) and short and long term behavior of the COx around these drifts are of great interest. Several constitutive models have been developed/used in the framework of the R&D and simulation programs of Andra. A model benchmark exercise has been launched since 2012 to provide an overall view of the developed models regarding the in situ observations. In this view, two series of test cases, respectively at material point scale and at drift excavation scale are defined. Different kinds of constitutive models based on the elasto-visco-plasticity concept, continuum damage mechanics, the rigid block spring method and two-scale computational homogenized model (CHM) are used within this exercise. The obtained results show that accounting for material anisotropy and strain localization treatment techniques can improve the obtained results when elasto-visco-plastic models are used. Damage mechanics based approaches and methods accounting for discontinuities through discrete elements provide also interesting insights especially when fracturing processes must be modeled. However, more efforts are necessary to improve the robustness of these kinds of approaches in the complex context of COx response to excavation works.