济阳坳陷古近系多级控砂机制分析

济阳坳陷古近系砂体形成和分布受到多种因素的控制,主要包括:①断陷类型;②构造带类型;③坡折带类型;④体系域类型;⑤沉积相类型。在不同类型断陷中发育的沉积体系相差较大,在不同规模箕状断陷中发育的沉积体系也具有差异性。同时,断陷类型控制着构造带的发育,构造带类型又决定着坡折带的发育部位,坡折带类型则影响着湖盆沉积体系域的发育程度和分布范围,而沉积相类型对砂体的特征具有直接的控制作用。显然济阳坳陷砂岩体的形成和分布遵循“多级控砂”的特征,5种因素共同影响并逐级控制着砂岩体在断陷湖盆中的形成与分布。     

环境温度对板式橡胶支座摩擦滑移性能的影响分析

采用有限元模拟的方式,对板式橡胶支座摩擦滑移特性进行分析,并与常温试验中获得的支座摩擦滑移滞回曲线、等效黏滞阻尼比等进行了对比.在获得可靠模型的基础上,分析环境温度对板式橡胶支座摩擦滑移特性的影响,研究了温度与支座摩擦滑移耗能、等效黏滞阻尼比和滑动起始距离的关系.结果表明:(1)板式橡胶支座的有限元模型可以较好地实现支...     

海洋纤维增强热塑性立管极限承载拉力预测方法

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。     

西南天山中—新生界层控砂砾岩型铜铅锌矿成矿规律

西南天山是新疆中—新生界层控砂砾岩型铜铅锌矿的重要产出地区,以萨热克铜矿、乌拉根铅锌矿、花园铜矿、伽师铜矿为代表,均产于隆起剥蚀区边缘的红层盆地中并严格受层位控制,赋矿盆地的下部为煤系生烃岩,中部为渗透性良好的砂砾岩铜铅锌矿储集层,上覆膏岩及泥岩等密闭盖层,具有铜铅锌-铀-煤-天然气同盆共存富集的成矿特征。文章总结了西南天山赋矿盆地沉积-构造演化及赋矿层位特征,研究了铜铅锌典型矿床的控矿条件和成矿作用特征。通过对比分析,总结了中—新生界砂砾岩型铜铅锌矿的区域成矿规律,认为有机质与铜铅锌成矿关系密切,推测在原始矿源层的基础上,在隆起部位经油田卤水叠加形成铜铅锌贫矿体,喜马拉雅期断裂构造沟通深源成矿流体再次叠加形成铜铅锌富矿体。总结构建了西南天山中—新生界层控砂砾岩型铜铅锌矿的成矿模式,以期为已知矿山深边部勘查及区域找矿工作部署提供依据。     

The cordierite‐bearing anatectic rocks of the higher Himalayan crystallines (eastern Nepal): low‐pressure anatexis,melt productivity,melt loss and the preservation of cordierite

Cordierite‐bearing anatectic rocks inform our understanding of low‐pressure anatectic processes in the continental crust. This article focuses on cordierite‐bearing lithologies occurring at the upper structural levels of the Higher Himalayan Crystallines (eastern Nepal Himalaya). Three cordierite‐bearing gneisses from different geological transects (from Mt Everest to Kangchenjunga) have been studied, in which cordierite is spectacularly well preserved. The three samples differ in terms of bulk composition likely reflecting different sedimentary protoliths, although they all consist of quartz, alkali feldspar, plagioclase, biotite, cordierite and sillimanite in different modal percentages. Analysis of the microstructures related to melt production and/or melt consumption allows the distinction to be made between peritectic and cotectic cordierite. The melt productivity of different prograde assemblages (from two‐mica metapelite/metagreywacke to biotite‐metapelite) has been investigated at low‐pressure conditions, evaluating the effects of muscovite v. biotite dehydration melting on both mineral assemblages and microstructures. The results of the thermodynamic modelling suggest that the mode and type of the micaceous minerals in the prograde assemblage is a very important parameter controlling the melt productivity at low‐pressure conditions, the two‐mica protoliths being significantly more fertile at any given temperature than biotite gneisses over the same temperature interval. Furthermore, the cordierite preservation is promoted by melt crystallization at a dry solidus and by exhumation along P‐T paths with a peculiar dP/dT slope of about 15–18 bar °C^?1. Overall, our results provide a key for the interpretation of cordierite petrogenesis in migmatites from any low‐P regional anatectic terrane. The cordierite‐bearing migmatites may well represent the source rocks for the Miocene andalusite‐bearing leucogranites occurring at the upper structural levels of the Himalayan belt, and low‐P isobaric heating rather than decompression melting may be the triggering process of this peculiar peraluminous magmatism.     

Geotechnical assessment of the bearing capacity of coal mine floors

Summary This investigation concerns 3 longwall faces having variable strata and mining conditions, but supported by 202 tonnes hydraulic 6-leg chocks. Bearing capacity tests along the faces were conducted to evaluate the factors influencing floor deformation and failure. The effect of size, shape and perimeter of the base plates, thickness of the floor layer, time and moisture on the ultimate bearing capacity of the floor was measured and discussed. Application of this work is the prediction of stability and support performance of face ends, as well as the design of support systems and ground control on production faces.     

几何定向最优化方案的探讨

本文从几何定向精度对贯通误差的影响着手,采用SWIFT(sequential WeightIncxeasing Factor Technique)优化法,并借助于PC—1500机,Basic语言来寻找几何定向的最佳图形,提高定向精度,确保隧道正确贯通。     

Age Assignment of the Lycoptera- bearing Bed

In the Yanliao area, the occurrence of the Nestoria-Keratestheria fauna and the Eoparacypris- Luanpingella-Darwinula assemblage in the Dabeigou Formation s.s., a Rb-Sr isochron age of 145.2 Ma for the Baiqi Formation and a complete stratigraphic sequence-all this proves that the Lycoptera-bearing bed overlies the Upper Jurassic. The Jehol fauna comprises the primitive Trigonioidids fauna, Eosestheria fauna, Lycoptera fauna et al., and their own laws of evolution expound that they belong to Cretaceous faunas. The associations of Eosestheria with Yanjiestheria, Lycoptera with Eosestheria, and Kuntulunia with Yanjiestheria as well as the occurrence of early angiosperms and sporo - pollen in the Fuxin Formation and its equivalents also demonstrate that the Lycoptera-bearing, bed should be assigned to the Cretaceous. The confirmation of the existence of Aucellina in the Jixi Group and the correlation of Trigonioidids and Cypridids with those in the equivalent strata of Japan and Western Europe have also been     

中国沿海地区灾害发生的环境和社会经济背景*

本文研究了中国沿海地区灾害发生的自然环境背景,特别讨论了地质构造因素、气候因素和地貌因素对灾害的影响.制定了孕灾环境区划,全区按地貌类型划分为北部平原和南部低山丘陵孕灾区以及10个易灾亚区.分析了灾害发生的社会经济背景,区域承灾能力和人类活动对灾害的影响.最后根据地球系统各圈层相互作用及外部强迫因子对灾害发生的影响,讨论了一般灾害的发生和发展规律.     

地层含金银性评价的地球化学准则——以扬子地台北缘中段中上元古界为例

金银丰度的高低不是控制金银矿化的决定性因素。有利于金矿化的因素包括:较高的金银丰度;全银的几何平均值与算术平均值比较;金分布及银分布均为多峰偏态,对数分布为正态-正偏;易释放金比例高;地层中金银形成的元素组合同区域金银矿床的矿化元素组合接近。