武汉市高层建筑岩土工程问题分析

武汉市是华中地区最大的城市,改革开放以来,兴建了许多高层建筑。高层建筑尤其是超高层建筑的主要特点是高度大、重心高、基底压力大及基础埋深大等。而武汉地区的地质条件又比较复杂,就第四纪地层而言,从最新沉积的各类软土如人工填土、淤泥类土、软塑状粘性土等,到全新世(Q4)沉积的各类砂土与卵砾石,直至晚更新世(Q3)及其以前沉积的老粘土均有分布。各类土层的厚度、深度及性质均变化较大。因此武汉地区高层建筑的岩土工程问题就显得复杂与多样,在众多复杂的岩土工程问题中,本文主要分析了比较突出的基础持力层与基础类型的确定,深基坑开挖中的边坡滑移、基坑涌水、流砂、突涌以及基坑防护等。通过对这些问题的分析,从中可以得出一些规律,对今后高层建筑的兴建具有一定的指导作用。     

Geology and Genesis of the Ta'ergou Skarn - Quartz Vein Tungsten Deposit in the North Qilian Caledonian Orogenic Belt, Northwest China

Abstract. The Ta'ergou tungsten deposit in Gansu province, northwestern China, is located in the western part of the North Qilian Caledonian orogen, and consists of scheelite skarn bodies and wolframite quartz veins. The tungsten‐bearing skarn developed by the replacement of carbonate layers intercalated in the Precambrian schist and amphibolite whereas wolframite‐quartz ore veins developed along a group of fractures that cut through horizontal skarns. The Ta'ergou tungsten deposit is genetically related to the Caledonian Yeniutan granodiorite intrusion and occurs ca. 500 m wide in the exo‐contact zone 300 ～ 500 m apart from the intrusion. The granodiorite displays a lower grade of differentiation, low content of SiO₂ and high contents of mafic components. There are three types of fluid inclusions in the wolframite‐quartz vein systems, i. e. aqueous, CO₂‐H₂O and CO₂‐rich. The homogenization temperature of aqueous inclusion ranges from 140 to 380d?C and their salinities from 6.4 to 17.4 equivalent wt% NaCl. Laser Raman spectroscopy shows that the inclusions contain a relatively high content of CO₂. The δ³⁴S values of skarn type sulfides range from +8.1 to +12.7 per mil and those of quartz vein sulfides from +9.3 to +14.9 per mil, similar to sulfides of the granodiorite with from +6.0 to +11.7 per mil. The δ¹⁸O values of quartz are between +10.5 and +13.3 per mil and those of wolframite between +3.4 and +5.1 per mil. The δ¹⁸O water values of ore forming fluids range from +0.6 to +6.4 per mil and suggest the mixture of magmatic fluids with meteoric water formed the ore‐forming fluids. It has been proved that Precambrian strata in the west sector of North Qilian region are enriched in tungsten. We propose the strata were remelted to be tungsten‐granitoid during subduction. The polymetallic tungsten was gradually accumulated into the roof pendants of the granite intrusion by fractional crystallization and then was deposited by hydrothermal fluids during metasomatism and infilling along fractures. On the other hand, the granite intrusion also acted as “heating machine” to make hydrothermal fluids leach out the metals from Precambrian strata and these metals joined the ore‐forming hydrothermal system.     

Chemical, Isotopic, and Fluid Inclusion Evidence for the Hydrothermal Alteration of the Footwall Rocks of the BIF-Hosted Iron Ore Deposits in the Hamersley District, Western Australia

Abstract. The petrography, chemical, fluid inclusion and isotope analyses (O, Rb-Sr) were conducted for the shale samples of the Mount McRae Shale collected from the Tom Price, Newman, and Paraburdoo mines in the Hamersley Basin, Western Australia. The Mount McRae Shale at these mines occurs as a footwall unit of the secondary, hematite-rich iron ores derived from the Brockman Iron Formation, one of the largest banded iron formations (BIFs) in the world. Unusually low contents of Na, Ca, and Sr in the shales suggest that these elements were leached away from the shale after deposition. The δ¹⁸O (SMOW) values fall in the range of + 15.0 to +17.9 per mil and show the positive correlation with calculated quartz/sericite ratios of the shale samples. This suggests that the oxygen isotopic compositions of shale samples were homogenized and equilibrated by postdepositional event. The pyrite nodules hosted by shales are often rimmed by thin layers of silica of varying crystallinity. Fluid inclusions in quartz crystals rimming a pyrite nodule show homogenization temperatures ranging from 100 to 240C for 47 inclusions and salinities ranging from 0.4 to 12.3 wt% NaCl equivalent for 18 inclusions. These fluid inclusion data give direct evidence for the hydrothermal activity and are comparable to those of the vein quartz collected from the BIF-derived secondary iron ores (Taylor et al, 2001). The Rb-Sr age for the Mount McRae Shale is 1,952 ± 289 Ma and at least 200 million years younger than the depositional age of the Brockman Iron Formation of ∼ 2.5 Ga in age. All the data obtained in this study are consistent with the suggestion that high temperature hydrothermal fluids were responsible for both the secondary iron ore formation and the alteration of the Mount McRae Shale.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

往复荷载作用下矩形钢管混凝土压弯构件承载力计算

本文基于往复荷载作用下矩形钢管混凝土压弯构件的实验结果，比较了国内外比较典型的设计规范(程)，包括英国BS5400(1979)、美国ACI318—99(1999)和AISC-LRFD(1999)、日本AIJ(1997)、欧洲EC4(1994)、中国GJB4142-2000(2001)和福建省地方标准(送审稿)，及本文数值方法在计算往复荷载作用下矩形钢管混凝土压弯构件承载力的差异。结果表明，在进行往复荷载作用下矩形钢管混凝土压弯构件承载力计算时，各种计算方法获得的承载力都偏于安全，其中，数值计算结果与实验结果最接近，GJB4142—2000(2001)的计算结果与实验结果吻合程度稍差，ACI318—99(1999)，EC4(1994)和福建省地方标准(送审稿)的计算结果比实验结果约低20％，而BS5400(1979)、AISC—LRFD(1999)和AIJ(1997)的计算结果比实验结果总体上低30％以上。本文结果可供进行矩形钢管混凝土结构设计时参考。     

冀鲁豫交界区地下流体模糊熵值的变化与地震的关系

采用概率化预处理方法，把冀鲁豫交界区地下流体多种观测项目的观测值转化为概率值时间序列，然后计算其模糊从属函数。在此基础上计算该区地下流体构成的信息源系统的模糊熵值，分析了模糊熵值变化与1983年山东菏泽Ms 5.9地震和1985年河北任县Ms5.0地震的关系。结果显示，在这两次中强地震前分别有明显的减熵异常过程，并且一次比一次明显，中强地震都发生在低熵值处，震后恢复到高熵值的变化过程。这可能反映了地下流体构成的信息源系统在地震孕育和发生过程中的减熵有序变化。通过研究认为，该区模糊熵值减到0.907为发震前兆异常警戒线，并且离中强地震发生的时间越近，减熵过程越大；震级越大，减熵过程越明显，减熵时间越长。     

小波变换在识别储层流体性质中的应用

根据小波变换的特点提出一种识别储层流体的新方法. 本文假设测井所得的信号为地层微观孔隙结构、地层流体性质及岩性和岩相等各部分的综合贡献之和，不同的储层中小波分析的能量谱特征不同，因而通过对已知储层模型进行小波能量谱分析，可得到各种储层的特征能量谱，根据这些储层特征能量谱就可以对待划分的储层段进行储层流体性质判别.     

Numerical Simulation of Drag Partition over Rough Surfaces

We present a numerical simulation of drag partition over rough surfaces. A computational fluid dynamics model is applied with high resolution to simulatingturbulent flows over arrays of roughness elements positioned on asmooth surface. The skin drag on the surface and the pressure drag on the roughnesselements are computed. The simulated drag partition compares well with wind-tunnelmeasurements and theoretical estimates for similar rough surfaces. This confirms that the computational approach offers an alternative to wind-tunnel and field experiments in studying drag and drag partition. The model is then applied to studying drag partition over rough surfaces with various roughness configurations. It is shown that drag partition depends not only on the magnitude of the roughness frontal area but also on the sizes and arrangement of roughness elements, because (1) the pressure drag coefficient is sensitive to roughness-element dimensions and (2) the arragement of roughness elements lead to different interferences of turbulent wakes. The impact ofthe latter factor is not insignificant.     

科学计算可视化技术的研究与应用

本文介绍了科学计算可视化技术的发展和应用情况，论述了这一新技术的特点及其在油气藏描述，工程设计ＣＡＤ等学科的应用和发展趋势。阐述了目前国际国内计算机图形学领域具体的研究方向和方法及图形软件、图形硬件的发展概况。     

井孔变径与井水位的固体潮效应

根据多孔介质渗流理论和弹性理论，在井孔变径条件下，得出水井含水层系统对潮汐信号响应的偏微分方程，认为井径变化相当于改变了井水柱的有效高度，从而影响了水井含水层系统的固有振动周期。分析了井孔变径对潮汐信号响应的周期特征，认为当含水层水体很大（含水层水平面积比井孔面积大得多），且含水层的渗透系数也很大的条件下，井径变化对井水位固体潮响应幅度影响很小