地震前兆时空非均匀性指标Cv值的实验检验

在双向加载条件下，对两种构造和介质不同的岩石标本进行变形实验，测量了标本表面不同部位的应变．在此基础上，利用王晓青和陈学忠等提出的描述地震前兆非均匀分布的参量————Cv值，分析了标本变形失稳过程中应变异常的分布，以期从实验角度检验Cv值方法并探讨其物理意义．研究表明，Cv值的变化与岩石变形特征的变化有关，是描述前兆分布非均匀性的一种有效指标；Cv值在失稳发生前先异常上升，然后下降，并在Cv值恢复过程中或恢复后伴随着失稳事件的发生．因此，Cv值是一种有效的预报指标．      

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

云南丽江地区断裂构造岩岩组动力学研究

丽江地区构造岩岩组动力学研究表明，研究区内中更新世末构造主压应力保持在北西至北西西方向变化；晚更新世中期之后构造主压应力方向则以北北东至北东方向为主变化，并有逐渐向近南北向转化的特点。因此玉龙雪山东麓断裂在中更新世末曾有过左旋压扭活动为主的历史，兼有左旋、右旋的活动过程，1996年2月3日丽江M7．0地震的破裂过程继承了晚更新世后期断裂的活动特点。     

Investigating Landslides Caused by Earthquakes – A Historical Review

Post-earthquake field investigations of landslide occurrence have provided a basis for understanding, evaluating, and mapping the hazard and risk associated withearthquake-induced landslides. This paper traces thehistorical development of knowledge derived from these investigations. Before 1783, historical accounts of the occurrence of landslides in earthquakes are typically so incomplete and vague that conclusions based on these accounts are of limited usefulness. For example, the number of landslides triggered by a given event is almost always greatly underestimated. The first formal, scientific post-earthquake investigation that included systematic documentation of the landslides was undertaken in the Calabria region of Italy after the 1783 earthquake swarm. From then until the mid-twentieth century, the best information on earthquake-induced landslides came from a succession ofpost-earthquake investigations largely carried out by formal commissions that undertook extensive ground-based field studies. Beginning in the mid-twentieth century, when the use of aerial photography became widespread, comprehensive inventories of landslide occurrence have been made for several earthquakes in the United States, Peru, Guatemala, Italy, El Salvador, Japan, and Taiwan. Techniques have also been developed for performing ``retrospective' analyses years or decades after an earthquake that attempt to reconstruct the distribution of landslides triggered by the event. The additional use of Geographic Information System (GIS) processing and digital mapping since about 1989 has greatly facilitated the level of analysis that can applied to mapped distributions of landslides. Beginning in 1984, syntheses of worldwide and national data on earthquake-induced landslides have defined their general characteristics and relations between their occurrence and various geologic and seismic parameters. However, the number of comprehensive post-earthquake studies of landslides is still relatively small, and one of the most pressing needs in this area of research is for the complete documentation of landslides triggered by many more earthquakes in a wider variety of environments.     

层状岩质边坡的屈曲破坏分析

本文根据多层层状结构岩质边坡的屈曲破坏模式，建立了相应的力学模型，从理论上对这种形式的破坏机理进行了研究，得出了相应力学模型的挠曲曲线的理论解。对具体工程实例的应用表明，本文的研究成果不仅能解决具体工程问题，而且有助于深入理解该类边坡的屈曲破坏机理。     

川藏公路拉月滑坡的块状破坏特征

拉月滑坡位于东久河左岸，为典型的高位岩质滑坡。1967—08—29拉月一带山体突然发生特大型滑坡，体积超过千万立方米，是川藏公路线上著名的“拉月大塌方”灾害。文章应用块状岩体稳定性分析方法，对同结构岩石块体相互嵌合、形成具不同稳定状况的的岩体结构、控制了滑坡的发生的特点进行了分析，证明该方法判别岩质滑坡的稳定性是非常有效的。岩质滑坡在西藏与西南地区都十分普遍，因此，通过对拉月滑坡块状破坏过程的分析，对其它岩质滑坡的稳定性判别具有很好的借鉴作用。     

从江县翁浪金矿床容矿岩石与围岩蚀变及其找矿标志

文章简单介绍了构造蚀变岩型金矿翁浪金矿床的容矿岩石和围岩蚀变特征，指出该类矿床的找矿标志，对进一步寻找此类矿床有一定的意义。     

测井资料交会图法在火山岩岩性识别中的应用

在火山岩储层研究中，岩性识别显得越来越重要。在评述目前常用的岩性识别方法后，重点以测井资料交会图法为例，以松辽盆地徐家围子断陷升平气田深层白垩系营城组火山岩为对象，优选出密度测井、自然伽玛测井、声波测井、电阻率、钍铀等测井项目的数据进行交会，编制出测井曲线交会图版，并以此为依据识别出该区的火山岩主要岩性有：安山岩、玄武岩、流纹岩和凝灰岩等。识别结果与实际情况相吻合。     

煤层底板突水系数计算公式的探讨

根据从诸多濒临带压开采威胁的煤矿中得到大量的第一手资料,运用多元统计分析方法,揭示出了煤层底板突水这种地质现象的演化和特征的内在联系和规律,建立了矿压对煤层底板破坏深度的计算式。通过对以往煤层底板突水系数计算公式进行对比、分析、推理和总结,克服了以往计算公式的不足,继承和发展了公式的优点,得出了考虑因素较全面和较科学的突水系数计算式,从而为解决煤层底板隔水岩柱薄弱地带或断裂陷落柱薄弱地带的煤矿安全生产提供了一套行之有效的解决方法。这套公式在太原西峪煤矿和晋城矿务局(西区)得到了应用,证明是一种行之有效的方法。