低阻覆盖层对高频大地电磁测深的影响

低阻覆盖层对电磁波具有屏蔽效应,会降低高频大地电磁测深的探测能力。通过一维正演模拟,对无低阻覆盖层时探测能力和有低阻覆盖层时探测能力的变化进行对比研究,表明有低阻覆盖时,探测能力普遍下降;在相同探测能力条件下,高频大地电磁测深可探测异常体上覆围岩厚度与异常体厚度的比值,和围岩与异常体电阻率比值呈线性关系。通过綦江县某铁...     

基于多元自适应回归样条的青藏高原温泉区域的冻土分布制图

以探地雷达、电磁测深、钻探等技术方法获得野外数据及数字高程（DEM）遥感数据为基础,通过聚类分析和相关性分析对高程、坡度、坡向等因素对多年冻土分布的影响进行了定量化研究.利用非线性的多元自适应回归样条（MARS）方法建立了基于高程、太阳辐射的多年冻土分布模型,通过自身的交叉验证及对比年平均地温模型和逻辑回归模型的总体分...     

雪粒径遥感反演研究进展

介绍了雪粒径遥感反演的研究历史,阐述了球形或非球形假设下基于雪在可见光波段高反射,在红外区雪面反射率显著下降且对雪粒径变化敏感原理的遥感反演基础,其中包括诸如温度、波长、颗粒形状等,并总结了目前研究中所应用的模型和算法,指出其优点和不足之处.此外,为了得到反演粒径的准确性,讨论了诸如温度、波长、颗粒形状等因素对粒径反演...     

松辽盆地北部泉头组三、四段储层质量预测

为了预测松辽盆地北部泉头组三、四段低渗透储层的质量,首先将碎屑岩的成岩作用细分为早成岩阶段A、早成岩阶段B期、中成岩阶段A1亚期、中成岩阶段A21、A2、中成岩阶段B期。统计结果表明,成岩作用对储层的物性和含油性具有明显的控制作用,处于中成岩阶段B期的任何沉积相的砂体均不能产出工业油气流,在中成岩阶段A22只有主河道砂...     

三维全空间坑道直流聚焦超前探测数值模拟

应用同性点源之间的相斥和聚焦原理,设计出适合坑道空间的垂直聚焦超前探测方案。利用有限元法结合高效行压缩存储格式及迭代求解算法,对三维坑道空间中聚焦超前探测效果进行模拟研究。数值计算结果与土槽物理模拟实验结果对比,说明设计方案达到l了聚焦超前探测的目地。通过坑道复杂模型计算,表明垂直聚焦观测方案能够有效探测前方和旁侧存在的不良地质体。     

地表一致性静校正量误差分析

目前,在生产中广泛使用的静校正方法几乎都是基于地表一致性假设的。在地表复杂地区,地形起伏较大,低速带厚度和横向速度变化较大,地表一致性假设往往与实际地质情况不符,在这种情况下再运用地表一致性静校正,势必产生很大的误差。笔者利用模型正演方法着重讨论复杂地区地表一致性静校正误差存在的原因及这种原因跟基准面、炮检距、低速带和基岩速度、低速带厚度、反射面深度等之间的关系,分析其变化规律,提出解决复杂地区静校正问题的建议,以期改进现有的静校正方法,达到减小误差的目的。     

复杂形态岩体接触带成矿耦合动力学三维数值模拟:以安庆铜矿为例

安庆铜矿是长江中下游成矿带中重要的矽卡岩矿床,其矿体绝大部分产在形态复杂的岩体接触带上,对于这种矿体定位特点,本文采用数值模拟的方法探讨了其动力学机制和主要的控矿因素。首先以AutoCAD和GO-CAD为平台构建安庆铜矿岩体及围岩的三维实体模型,并通过C++编程实现到模拟软件的模型格式转换,然后以FLAC3D为平台进行安庆铜矿热液成矿过程的力-热-流耦合数值模拟。结果显示,受控于拉张应力场,岩体大部分位置表现为正的体应变;月山岩体东枝南接触带是扩容最为明显的区域,部分岩石单元的大扩容角对扩容区出现有一定的贡献,岩石物理性质的差异及接触带的复杂形态则是其主要原因;岩石扩容部位成为流体汇集的有利场所,汇流部位与明显扩容区及主矿体产出位置相一致,推断矿体的定位是力-热-流共同作用的结果;运算结果亦指示现有矿体深部存在新的有利找矿靶区。     

高密度采集地震资料对缝洞型储层预测精度的影响分析

四川盆地蜀南地区下二叠统茅口组缝洞型储层具有强烈的非均质性特征,而且埋藏相对较深,信噪比和分辨率较低,地震预测的难度大。这里通过模型正演,分析不同道距二维地震资料对茅口组单缝洞体储层的分辨能力,并且在资料处理中,研究了高密度地震资料对抑制空间假频,以及提高横向分辨率的影响,最后通过实际资料对比和速度反演,进一步分析证实了高密度采集地震资料,能够有效提高缝洞型储层的预测精度。     

2.5-D DC Resistivity Modeling Considering Flexibility and Accuracy

We highlighted the flexibility of using unstructured mesh together with the local refinement by a resistivity model with complicated topography. The effect of topography is emphasized. Based on this, we calculated a specific class of layered models and found that the accuracy is not always satisfactory by utilizing the standard approach. As an improvement, we employed the layered earth as the reference model to calculate the wavenumbers. The comparison demonstrates that the accuracy is considerably improved...     

Wind-induced drift of objects at sea: The leeway field method

A method for conducting leeway field experiments to establish the drift properties of small objects (0.1-25 m) is described. The objective is to define a standardized and unambiguous procedure for condensing the drift properties down to a set of coefficients that may be incorporated into existing stochastic trajectory forecast models for drifting objects of concern to search and rescue operations and other activities involving vessels lost at sea such as containers with hazardous material.An operational definition of the slip or wind and wave-induced motion of a drifting object relative to the ambient current is proposed. This definition taken together with a strict adherence to a 10 m wind speed allows us to refer unambiguously to the leeway of a drifting object. We recommend that all objects if possible be studied using what we term the direct method, where the object’s leeway is studied directly using an attached current meter.We establish a minimum set of parameters that should be estimated for a drifting object for it to be included in the operational forecast models used for prediction of search areas for drifting objects.We divide drifting objects into four categories, depending on their size. For the smaller objects (less than 0.5 m), an indirect method of measuring the object’s motion relative to the ambient current must be used. For larger objects, direct measurement of the motion through the near-surface water masses is strongly recommended. Larger objects are categorized according to the ability to attach current meters and wind monitoring systems to them.The leeway field method proposed here is illustrated with results from field work where three objects were studied in their distress configuration; a 1:3.3 sized model of a 40-foot Shipping container, a World War II mine and a 220 l (55-gallon) oil drum.