Geochemistry and petrogenesis of anorogenic basic volcanic-plutonic rocks of the Kundal area,Malani Igneous Suite,western Rajasthan,India

The Kundal area of Malani Igneous Suite consists of volcano-plutonic rocks. Basalt flows and gabbro intrusives are associated with rhyolite. Both the basic rocks consist of similar mineralogy of plagioclase, clinopyroxene as essential and Fe-Ti oxides as accessories. Basalt displays sub-ophitic and glomeroporphyritic textures whereas gabbro exhibits sub-ophitic, porphyritic and intergrannular textures. They show comparable chemistry and are enriched in Fe, Ti and incompatible elements as compared to MORB/CFB. Samples are enriched in LREE and slightly depleted HREE patterns with least significant positive Eu anomalies. Petrographical study and petrogenetic modeling of [Mg]-[Fe], trace and REE suggest cogenetic origin of these basic rocks and they probably derived from Fe-enriched source with higher Fe/Mg ratio than primitive mantle source. Thus, it is concluded that the basic volcano-plutonic rocks of Kundal area are the result of a low to moderate degree (< 30%) partial melting of source similar to picrite/komatiitic composition. Within plate, anorogenic setting for the basic rocks of Kundal area is suggested, which is in conformity with the similar setting for Malani Igneous Suite.     

Design of backfilled thin-seam coal pillars using earth pressure theory

In underground coal mining any increase in coal recovery rate is dependent on a decrease in pillar size. Backfilling is one way of reducing the required size of pillars and hence the volume of coal left underground. Therefore any comparisons made between a self-supported mine layout and backfill supported mine layout are based directly on pillar design. The most effective way to examine the effect of backfill on pillar support, and subsequently the rate of recovery, would be to incorporate the mechanisms of backfill support directly into the current design procedure for coal pillars. This paper presents a review of the mechanics of backfill support, a method of estimating the magnitude of that support based on earth pressure theory, and an example that incorporates backfill support into current coal pillar design.     

Particularités de la contamination crustale des phonolites : exemple du Velay oriental (Massif central)

Sr and Nd isotopic compositions of one trachyte, eight phonolites and five basalts have been measured. The isotopic characteristics of the trachyte can be explained by a combined assimilation–fractional crystallization process within an upper crustal magmatic chamber. Some phonolites display isotopic signatures identical to basalts, suggesting that they have been protected against any crustal assimilation during their formation. Some others have low Sr contents, whereas they are enriched in radiogenic Sr (0.70451<⁸⁷Sr/⁸⁶Sr_i<0.71192), and display basaltic ¹⁴³Nd/¹⁴⁴Nd ratios. Both observations could be explained by very strong alkali feldspar fractionation and by subsequent very low assimilation of surrounding rocks (between 0.3 and 4%) during intrusion. To cite this article: J.-M. Dautria et al., C. R. Geoscience 336 (2004).     

Partial melting controls on the northwest Kyushu basalts from Saga-Futagoyama

Abstract   The major element and compatible trace element compositions of the northwest Kyushu basalts (NWKBs) collected from Saga-Futagoyama were analyzed to examine the petrogenesis of these basalts. Although nepheline-normative alkaline basalts are not found in the basalts from Saga-Futagoyama, the Saga-Futagoyama basalts almost cover the major element variations of NWKBs. The basalts can be chemically divided into two groups: an Fe-poor group (IPG) and an Fe-rich group (IRG). The compositional variation of IPG basalts is essentially controlled by the partial melting of the source as suggested by the following: (i) bulk rock MgO, FeO and NiO compositions indicate that some IPG samples were equilibrated with mantle olivine; and (ii) correlations between Al₂O₃, CaO and MgO are consistent with those of experimental partial melts of peridotites. The inconsistent behaviors of the elements compatible with clinopyroxene (Cpx), such as V (Sc and Cu), preclude the significant role of the fractional crystallization of Cpx and spinel in IPG variation. IPG basalts have low Al and high Fe concentrations compared to the products of melting experiments involving peridotites and pyroxenites, suggesting that the IPG source would have a lithology and bulk rock composition different from those of typical peridotites and pyroxenites. IRG basalts have negative correlations between Fe₂O₃* and MgO, and between V and Fe₂O₃*/MgO, indicating that IRG basalts would have fractionated Cpx. However, the anomalously Fe-rich feature of IRG basalts compared with NWKBs collected from other areas suggests that the role of Cpx fractionation in NWKBs is minor. Relatively low melting temperatures would have principally caused the large chemical variation of NWKBs.     

The anatomy of Continental Flood Basalt Provinces: geological constraints on the processes and products of flood volcanism

The internal architecture of the immense volumes of eruptive products in Continental Flood Basalt Provinces (CFBPs) provides vital clues, through the constraint of a chrono-stratigraphic framework, to the origins of major intraplate melting events. This work presents close examination of the internal facies architecture and structure, duration of volcanism, epeirogenetic uplift associated with CFBPs, and the potential environmental impacts of three intensely studied CFBPs (the Parana-Etendeka, Deccan Traps and North Atlantic Igneous Province). Such a combination of key volcanological, stratigraphic and chronologic observations can reveal how a CFBP is constructed spatially and temporally to provide crucial geological constraints regarding their development.

Using this approach, a typical model can be generated, on the basis of the three selected CFBPs, that describes three main phases of flood basalt volcanism. These phases are recognized in Phanerozoic CFBPs globally. At the inception of CFBP volcanism, relatively low-volume transitional-alkaline eruptions are forcibly erupted into exposed cratonic basement lithologies, sediments, and in some cases, water. Distribution of initial volcanism is strongly controlled by the arrangement of pre-existing topography, the presence of water bodies and local sedimentary systems, but is primarily controlled by existing lithospheric and crustal weaknesses and concurrent regional stress patterns. The main phase of volcanism is typically characterised by a culmination of repeated episodes of large volume tholeiitic flows that predominantly generate large tabular flows and flow fields from a number of spatially restricted eruption sites and fissures. These tabular flows build a thick lava flow stratigraphy in a relatively short period of time (c. 1–5 Ma). With the overall duration of flood volcanism lasting 5–10 Ma (the main phase accounting for less than half the overall eruptive time in each specific case). This main phase or ‘acme’ of volcanism accounts for much of the CFBP eruptive volume, indicating that eruption rates are extremely variable over the whole duration of the CFBP. During the waning phase of flood volcanism, the volume of eruptions rapidly decrease and more widely distributed localised centres of eruption begin to develop. These late-stage eruptions are commonly associated with increasing silica content and highly explosive eruptive products. Posteruptive modification is characterised by continued episodes of regional uplift, associated erosion, and often the persistence of a lower-volume mantle melting anomaly in the offshore parts of those CFBPs at volcanic rifted margins.     

Geochemistry of Paraná-Etendeka basalts from Misiones,Argentina: Some new insights into the petrogenesis of high-Ti continental flood basalts

The Early Cretaceous (∼135–131 Ma) Paraná-Etendeka continental flood basalts, preserved in bulk in the Paraná basin of southern Brazil and vicinity, have been divided into low-Ti and high-Ti types that govern the southern and northern halves of the basin, respectively. We have examined a new sample set from the southern margin of the northern high-Ti segment of Paraná basalts in Misiones, northeastern Argentina. These basalts are strongly to moderately enriched in TiO₂ (2–4 wt.%), have relatively high Ti/Y (300–500), low MgO (3.5–6.5 wt.%), and high Fe (FeO(tot) 12–14 wt.%) and belong to the Pitanga and Paranapanema magma types of Peate et al. (1992). Nd and Sr isotope compositions are quite unvarying with ε_Nd (at 133 Ma) values of −4.6 to −3.6 and initial ⁸⁷Sr/⁸⁶Sr of 0.7054–0.7059 and show no variation with fractionation. Compared to high-Ti lavas in the central and northern parts of the Paraná high-Ti basalt segment, the lavas from Misiones are similar to those in the northeastern magin of the basin but less radiogenic in initial Nd isotope composition than those in the central part. This variation probably reflects mixed EM1-EM2 source components in the sublithospheric mantle. A polybaric melt model of a sublithospheric mantle source at the garnet lherzolite-spinel lherzolite transition is compatible with the observed Ti budget of the Pitanga and Paranapanema lavas, regardless of the Nd isotope composition of their purported source.     

西准噶尔玛依勒地区枕状玄武岩年代学、地球化学及岩石成因

通过对造山带内洋岛玄武岩的时代及地球化学性质研究,不仅可以进行古海山/大洋高原的识别,而且还可以进行古洋盆演化及古构造格局恢复。笔者等最新在西准噶尔玛依勒山北侧识别出一套枕状玄武岩,其与火山碎屑岩、硅质岩共生。枕状玄武岩斜长石微晶普遍发育中空骸晶结构,是在水下熔岩急剧萃冷条件下迅速结晶的产物。通过LA-ICP-MS锆石U-Pb测年,获得枕状玄武岩206Pb/238U加权平均年龄为437.2±2.2Ma,该年龄的获得填补了志留纪碱性玄武岩的空白。岩石地球化学分析结果显示,玛依勒枕状玄武岩为碱性玄武岩系列,岩石具有中等Si O2(44.89%~47.81%),高Ti O2(3.28%~4.12%)及P2O5(0.50%~0.70%),低Mg O(3.49%~6.79%),轻、重稀土元素分异较为明显((La/Yb)N=5.5~7.3),无明显Eu异常(Eu/Eu*=0.96~1.06),相对富集Rb、Th、U,亏损Ba、K、Sr,没有明显Nb、Ta负异常,这些地球化学特征与洋岛玄武岩(OIB)极其相似。微量元素含量及反映源区性质的比值表明,枕状玄武岩来源于富集地幔源区,主要组成为尖晶石和石榴石二辉橄榄岩,并发生了5%±的部分熔融,其形成于大洋板内与地幔柱有关的海山/大洋岛屿环境。结合前人研究,认为西准噶尔乃至古亚洲洋在中古生代洋内俯冲的同时,大洋板内可能存在地幔柱活动。     

关于峨眉山大火成岩省一些问题的研究现状

峨眉山大火成岩省(ELIP)位于扬子板块西缘,是我国唯一被国际学术界认可的大火成岩省,受到国内外学者的广泛关注。主要围绕峨眉山玄武岩喷发前的隆升剥蚀情况、喷发时限、地幔柱的轴部位置等争议性问题进行探讨,总结了前人的研究成果。由于地幔柱和岩石圈之间相互作用的复杂性,加之地幔柱模型的不完善,峨眉山地幔柱活动在地表的真实响应也许更复杂。在今后的研究中,应该加强不同学科间的相互合作,着重研究地球深部动力学过程以及地球系统各圈层的相互作用。     

辽河油田东部凹陷玄武岩测井特征分析

针对辽河油田东部凹陷地区复杂火成岩岩性中玄武岩的测井特征,根据东部凹陷的测井数据及取芯段的薄片识别,共找到4种不同类型的玄武岩地层,分两组进行对比分析。第一组:气孔玄武岩、角砾化玄武岩;第二组:玄武岩、含油水层的玄武岩。利用玄武岩地层对应数据制作测井响应统计表,对比不同类型测井参数的差别制作交会图,得到角砾化玄武岩相对气孔玄武岩有较高的自然电位值,含油水层的玄武岩相对玄武岩有较高自然伽马值及中子值等特征。分析原因为气孔玄武岩及角砾化玄武岩孔隙裂缝发育,密度较低,黏土矿物充填角砾化玄武岩孔隙使自然电位值相对较高;含油水层的玄武岩中大量氢元素使中子值及自然伽马值相对玄武岩有所增加。