碳纤维布加固钢筋混凝土梁的现场实荷加载试验

通过对某工程中的钢筋混凝土梁采取粘贴碳纤维布的方式进行加固,并现场抽取试验梁进行了现场堆载实荷加载试验,对试验梁的挠度、裂缝开展情况和承载能力进行了全面分析,对该加固工程的效果进行了评价,供同行参考。     

钢筋混凝土扁梁柱节点抗震设计方法

为考虑扁梁柱节点内、外核心区的相互作用,对扁梁柱节点的内、外核心区进行了重新划分,认为内、外核心区有一个重叠的区域,给出了地震作用在扁梁柱节点内外核心区的分配方法,采用压杆模型和软化桁架模型,提出扁梁柱节点的设计方法。该方法可以考虑节点核心区钢纤维和扁梁中无粘结预应力对扁梁柱节点抗剪极限承载力的作用。该设计方法的可靠性得到四个钢筋混凝土扁梁柱节点试验数据的验证。     

ICP—AES法分析辉锑矿

本文针对辉锑矿成分复杂、主元素Sb易水解、部分元素易挥发,酸不溶元素的存在以及元素之间的干扰等问题,拟定了酸溶和碱熔分解试样的分析流程。在酸溶系统中结合TBP萃淋树脂和巯基棉分离富集分组,ICP-AES法测定Fe、Ca、Mg、Cu、Mn、Pb、Zn、Co、Ni、Au、Ag、In、Tl、Cd、Bi、Ga、Mo、Se、Te、As等20个元素。碱熔系统不分离主元素,用校正因素校正元素间光谱干扰并采用内标法ICP-AES测定Al、Ti、V、Ba、Sr、Sn、Sc、Cr、Be、Si和Sb等11个元素。试样验证表明,     

Interactions between basalts and oil source rocks in rift basins： CO2 generation

Basalts interbedded with oil source rocks are discovered frequently in rift basins of eastern China, where CO2 is found in reservoirs around or within basalts, for example in the Binnan reservoir of the Dongying Depression. In the reservoirs, CO2 with heavy carbon isotopic composition (δ13C>-10‰ PDB) is in most cases accounts for 40% of the total gas reserve, and is believed to have resulted from degassing of basaltic magma from the mantle. In their investigations of the Binnan reservoir, the authors suggested that the CO2 would result from interactions between the source rocks and basalts. As the source rocks around basalts are rich in carbonate minerals, volcanic minerals, transition metals and organic matter, during their burial history some of the transition metals were catalyzed on the thermal degradation of organic matter into hydrocarbons and on the decomposition of carbonate minerals into CO2, which was reproduced in thermal simulations of the source rocks with the transition metals (Ni and Co). This kind of CO2 accounts for 55%-85% of the total gas reserve generated in the process of thermal simulation, and its δ13C values range from -11‰- -7.2‰ PDB, which are very similar to those of CO2 found in the Binnan reservoir. The co-generation of CO2 and hydrocarbon gases makes it possible their accumulation together in one trap. In other words, if the CO2 resulted directly from degassing of basaltic magma or was derived from the mantle, it could not be accumulated with hydrocarbon gases because it came into the basin much earlier than hydrocarbon generation and much earlier than trap formation. Therefore, the source rocks around basalts generated hydrocarbons and CO2 simultaneously through catalysis of Co and Ni transition metals, which is useful for the explanation of co-accumulation of hydrocarbon gases and CO2 in rift basins in eastern China.     

Crystal morphologies in pillow basalts: implications for mid-ocean ridge processes

We present the results of a detailed petrological study of a sparsely phyric basalt (MAPCO CH98-DR11) dredged along the Mid-Atlantic Ridge (30°41′N). The sample contains microphenocrysts of olivine that display four different rapid-growth morphologies. Comparison of these morphologies with those obtained in dynamic crystallization experiments allows us to constrain the thermal history of the sample. The dendritic morphology (swallowtail, chain and lattice olivine) is directly related to the final quenching during magma–seawater interaction. In contrast, the three other morphologies, namely the complex polyhedral crystal, the closed hopper and the complex swallowtail morphology result from several cycles of cooling–heating (corresponding to a maximum degree of undercooling of 20–25°C) during crystal growth. These thermal variations occurred before eruption and are interpreted to be the result of turbulent convection in a small magmatic body beneath the ridge. The results suggest that the Mid-Atlantic Ridge is underlain by a mush zone that releases batches of liquid during tectonic segregation. Aphyric basalts are emitted during eruptions controlled by the tectonic activity, whereas phyric basalts correspond to small fractions of magma from the mush zone mobilized by reinjections of primitive magmas.     

光纤应变仪的研制与应用前景

光纤应变仪是利用特种光纤光栅器件或者光纤干涉技术进行高精度应变传感的仪器.常见特种光纤光栅有相移光栅和光纤光栅谐振腔,线宽均较窄,可达到0.01 pm量级甚至更窄,结合高精度解调方法,可显著提高系统的应变测量精度.     

关于峨眉山大火成岩省一些问题的研究现状

峨眉山大火成岩省(ELIP)位于扬子板块西缘,是我国唯一被国际学术界认可的大火成岩省,受到国内外学者的广泛关注。主要围绕峨眉山玄武岩喷发前的隆升剥蚀情况、喷发时限、地幔柱的轴部位置等争议性问题进行探讨,总结了前人的研究成果。由于地幔柱和岩石圈之间相互作用的复杂性,加之地幔柱模型的不完善,峨眉山地幔柱活动在地表的真实响应也许更复杂。在今后的研究中,应该加强不同学科间的相互合作,着重研究地球深部动力学过程以及地球系统各圈层的相互作用。     

Geochemistry of Paraná-Etendeka basalts from Misiones,Argentina: Some new insights into the petrogenesis of high-Ti continental flood basalts

The Early Cretaceous (∼135–131 Ma) Paraná-Etendeka continental flood basalts, preserved in bulk in the Paraná basin of southern Brazil and vicinity, have been divided into low-Ti and high-Ti types that govern the southern and northern halves of the basin, respectively. We have examined a new sample set from the southern margin of the northern high-Ti segment of Paraná basalts in Misiones, northeastern Argentina. These basalts are strongly to moderately enriched in TiO₂ (2–4 wt.%), have relatively high Ti/Y (300–500), low MgO (3.5–6.5 wt.%), and high Fe (FeO(tot) 12–14 wt.%) and belong to the Pitanga and Paranapanema magma types of Peate et al. (1992). Nd and Sr isotope compositions are quite unvarying with ε_Nd (at 133 Ma) values of −4.6 to −3.6 and initial ⁸⁷Sr/⁸⁶Sr of 0.7054–0.7059 and show no variation with fractionation. Compared to high-Ti lavas in the central and northern parts of the Paraná high-Ti basalt segment, the lavas from Misiones are similar to those in the northeastern magin of the basin but less radiogenic in initial Nd isotope composition than those in the central part. This variation probably reflects mixed EM1-EM2 source components in the sublithospheric mantle. A polybaric melt model of a sublithospheric mantle source at the garnet lherzolite-spinel lherzolite transition is compatible with the observed Ti budget of the Pitanga and Paranapanema lavas, regardless of the Nd isotope composition of their purported source.     

冲击荷载下玄武岩纤维水泥土吸能及分形特征

为研究玄武岩纤维对水泥土冲击破坏过程中能量吸收及碎块块度分布特征的影响,采用Φ50 mm变截面霍普金森压杆（split Hopkinson pressure bar,简称SHPB）试验装置对不同玄武岩纤维掺量的水泥土进行了冲击压缩和动态劈裂试验,分析了冲击荷载作用下玄武岩纤维掺量与水泥土吸收能、破坏形态和分形维数 的关系,试验结果表明：随着玄武岩纤维掺量的增加,水泥土吸收能呈先增大后减小的趋势,超过最佳掺量后,由于纤维-纤维薄弱面的存在,水泥土吸收能减少;冲击破坏后水泥土破碎块度分布是具有统计意义上的分形,冲击压缩试验中水泥土破碎块度平均粒径随玄武岩纤维掺量的增加而不断增大,对应的 值总体上呈现不断减小的趋势;在动态劈裂试验中,玄武岩纤维掺量在0～2.0%范围内,水泥土破碎块度平均粒径呈现上升趋势, 值不断减小,玄武岩纤维掺量超过2.0%后,平均粒径有所降低,对应 值增大。玄武岩纤维水泥土吸收能和 值之间有着密切的联系,冲击压缩试验中,吸收能在分形维数为2.20～2.26范围内呈先增大后减小的趋势,而在动态劈裂试验中,吸收能在分形维数为1.85～2.20范围内总体呈现下降趋势,两者具有一定的负相关性;合适掺量的玄武岩纤维对水泥土动态特性起着积极作用,通过试验得出玄武岩纤维的合适掺量为1.5%～2.0%。