复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

The simultaneous use of piles and prestressed anchors in foundation design

The paper presents a simplified design procedure to evaluate the loads in piles and prestressed anchors when simultaneously used in foundations under tension loads and high overturning moments. Although involving some necessary simplifications for the sake of design, the procedure keeps the main features of load transfer from piles and anchors to the surrounding soil. The approximate method has been adopted by the authors in relevant projects in Brazil, whose long term satisfactory performance indicates its appropriate performance. Two practical examples have been selected to illustrate the application of the proposed method. It is shown that anchor prestressing plays an important role in limiting tension loads on the piles and controlling foundation eccentricity. The importance of monitoring for replacement of occasional prestress losses to prevent long-term pile overstressing is illustrated.     

Modeling of Beams on Reinforced Granular Beds

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.     

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

新近沉积粉细砂层地基的试验与评价

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

燕山水库坝基防渗墙优化设计

因现场资料不足或分析手段落后等原因,当前进行水库坝基防渗墙设计,往往存在过于保守的倾向。以河南省燕山水库为例,基于优化设计的思路,采用目前较为成熟的二维有限单元法,对不同防渗条件下的坝基渗流场分别进行了模拟,并将计算所得比降、流量与允许比降、允许流量做了对比,从定量的角度提出了既安全、又经济的防渗方案:防渗墙厚度取0.8m,深度取打入破碎带5m。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中     

冲击压实技术在路基工程中的应用研究

通过介绍冲击压实机基本原理,分析冲击压实技术特点,结合工程实例,表明冲击压实技术具有减少路基工后沉降、提高路基整体强度及加固软弱地基作用效果显著,同时填石路堤施工工艺的改进和压实标准进行了研究.