密云地体铁矿成矿规律及找矿方向研究

应用地体构造理论 ,对密云地体含铁建造特征及构造对铁矿体的控制规律进行了研究。认为表壳岩为原始含矿围岩,ＴＴＧ杂岩破坏了原含矿岩系的连续性,使表壳呈残体漂浮或呈包体形式被包裹在ＴＴＧ杂岩中。矿体的赋存状态主要受两期共轴迭加褶皱构造和韧脆性关照切断裂复合控制。     

土的周期加载实验的研究

作者对室内土的周期加载实验进行了较全面的综述。包括实验设备、方法、结果及分析模型 ,并对以后的研究提出建议。随着海上石油的开发及海岸构筑物的建设 ,迫切需要对海底土动力学特性进行研究。掌握目前世界在这一领域的研究现状有助于在高超点上开展创新工作和解关键问题。     

Shear sense inversion in the Hilti mantle section (Oman ophiolite) and active mantle uprise

Structural analyses in the well-exposed Hilti mantle section in the Oman ophiolite suggest a model of forceful horizontal flow in the uppermost mantle at the edge of a diapir below a oceanic spreading center. Detailed structural mapping, focussed on high-T deformation (i.e., asthenospheric flow), revealed a gently undulated flat structure with a uniform east-west flow direction. When it is related to the N–S to NNW–SSE trending, vertical sheeted dike complex located to the east, this mantle flow is parallel to the spreading direction. Because the Moho is so flat lying, a large dunite occurrence at the south-western region is possibly ascribed to the Moho Transition Zone. Kinematic analysis shows that the shear direction generally changes from top-to-the west in the upper level, to top-to-the east in the lower level with respect to the Moho. This shear sense inversion is explained by a model of forceful flow due to an active mantle uprise and it is not compatible with a passive mantle uprise. In the plan section, the boundary of the shear sense inversion is subparallel to the flow direction and subperpendicular to the spreading axis. In cross section, the boundary appears to occur at various depths in the range of 200 m to 500 m. It shows that the active mantle uprise in the diapir center resulted in a channelled horizontal flow.     

Incipient Motion of Sediment Under Currents

Summarized in the paper are the author's studies on incipient motion of sediment in recent 40years.In addition to the forces of gravity,drag and lift,the cohesive force and the additional static pres-sure are important for fine particles.The relations between three stages of incipient motion are defined byuse of instantaneous velocity.Formulas for initial velocity and critical shear stress are given and overallverified by the author's and others'experimental data.     

基于试验与模型的根系增强抗剪强度分析

在总结近代学者对植物根系固土作用机制研究的基础上,采用大盒直剪试验与物理模型,对重庆缙云山地区6种常见植物:马尾松、香樟、广东山胡椒、四川大头茶、白毛新木姜子、四川山矾根系的增强抗剪强度进行对比。通过自制的大盒直剪仪对植物实际固土效果进行了测定,该大直剪仪具有简单、经济、易行等特点。通过对多种植物根系进行抗拉试验和根土复合体受力分析,确定了植物根系的抗拉强度与植物根面积比率。利用Wu模型对6种植物的根系固土效能进行模型计算。结果表明,不同的植物根系类型对增强抗剪强度值的影响非常显著。在重庆缙云山地区的土壤质地情况下,Wu的根土复合体模型高估了根系增强土壤的抗剪强度约为90%。基于该结论,为使Wu模型计算的根系固土强度值较为准确,修订Wu模型中的k值为0.63。     

高层钢板剪力墙结构底部加强层抗震性能分析

采用非线性有限元软件Msc．Marc对高层钢管混凝土组合框架-钢板剪力墙结构底部四层两跨未加劲薄钢板墙模型进行了推覆分析与滞回分析。计算结果表明,组合钢板剪力墙结构具有良好的延性及稳定的滞回性能,结构进入弹塑性阶段后钢板墙的拉力带方向与CAN／CSA S16—01（2001）推荐公式吻合良好。根据分析结果,比较了不同分析类型及不同钢板墙厚度的影响。研究发现,考虑钢材强化及包辛格效应后,结构滞回分析的极限承载力将小于推覆分析的极限承载力;随着钢板墙厚度的增大,结构的弹塑性屈曲模态由局部屈曲向整体屈曲过渡;在罕遇地震作用下,钢板墙结构的底层边缘约束柱将产生较大的轴拉力,甚至被拉断而导致结构整体破坏。     

Effect of abutment modeling on the seismic response of bridge structures

Abutment behavior significantly influences the seismic response of certain bridge structures. Specifically in the case of short bridges with relatively stiff superstructures typical of highway overpasses, embankment mobilization and inelastic behavior of the soil material under high shear deformation levels dominate the response of the bridge and its column bents. This paper investigates the sensitivity of bridge seismic response with respect to three different abutment modeling approaches. The abutment modeling approaches are based on three increasing levels of complexity that attempt to capture the critical components and modes of abutment response without the need to generate continuum models of the embankment, approach, and abutment foundations. Six existing reinforced concrete bridge structures, typical of Ordinary Bridges in California, are selected for the analysis. Nonlinear models of the bridges are developed in OpenSees. Three abutment model types of increasing complexity are developed for each bridge, denoted as roller, simplified, and spring abutments. The roller model contains only single-point constraints. The spring model contains discrete representations of backfill, bearing pad, shear key, and back wall behavior. The simplified model is a compromise between the efficient roller model and the comprehensive spring model. Modal, pushover, and nonlinear dynamic time history analyses are conducted for the six bridges using the three abutment models for each bridge. Comparisons of the analysis results show major differences in mode shapes and periods, ultimate base shear strength, as well as peak displacements of the column top obtained due to dynamic excitation. The adequacy of the three abutment models used in the study to realistically represent all major resistance mechanisms and components of the abutments, including an accurate estimation of their mass, stiffness, and nonlinear hysteretic behavior, is evaluated. Recommendations for abutment modeling are made.     

江苏大丰潮滩潮流边界层特征研究

2003年7月中小潮期间使用MIDAS-400用户化数据采集系统在江苏大丰潮滩上进行了垂向多层位同步的流速和悬沙浓度观测。根据观测资料研究了潮流作用下的潮滩底部边界层过程,结果表明,观测地点的潮汐不对称现象十分明显,落潮流速、历时和输水输沙量皆明显大于涨潮;在潮周期内的多数时间里流速剖面符合对数分布,但在风力较强、水流快速增加和流速缓慢的情况下,流速剖面常偏离对数分布;悬沙颗粒垂向混合均匀,悬沙浓度剖面符合Rouse公式;落潮时的底部切应力和摩阻流速明显大于涨潮,摩阻流速与各水层流速通常有较好的线性关系;滩面糙度主要与沙纹形态和推移质运动强度有关,它与摩阻流速存在密切关系;悬沙浓度具有明显的减阻效应,受其影响,摩阻流速和底部切应力分别减小了28%~41%和40%~62%。     

海洋湍流观测技术

湍流在海洋能量和水体的交换演化中起着非常重要的作用。海洋湍流研究的发展和海洋湍流观测仪器的研发密切相关。世界上湍流观测仪器的研发起步于上世纪50年代,但是我国在湍流观测设备方面到目前为止仅仅处于起步和引进国外设备阶段。针对我国的情况,文中对海洋湍流观测的平台、探头测量原理及其数据修正、资料后处理等关键技术做一个总结性的介绍,为我国使用引进的海洋湍流设备和自主开发海洋湍流测量设备提供参考。     

辽宁石佛寺水库砂土液化处理试验

石佛寺水库工程建筑物区主要工程地质问题之一为砂土液化问题。在主坝轴线上选取适当部位进行几种液化处理方案的试验,为检测液化处理效果进行了地基加固处理前后密实度分析和加固处理后地基土地震液化特征分析与评价,对比几种方案的可行性,最终选择解决场区饱和砂土液化的最优方案。