Impact of Cloud Microphysical Processes on the Simulation of Typhoon Rananim near Shore. Part II: Typhoon Intensity and Track

The impact of cloud microphysical processes on the simulated intensity and track of Typhoon Rananim is discussed and analyzed in the second part of this study. The results indicate that when the cooling effect due to evaporation of rain water is excluded, the simulated 36-h maximum surface wind speed of Typhoon Rananim is about 7 m s⁻¹ greater than that from all other experiments; however, the typhoon landfall location has the biggest bias of about 150 km against the control experiment. The simulated strong outer rainbands and the vertical shear of the environmental flow are unfavorable for the deepening and maintenance of the typhoon and result in its intensity loss near the landfall. It is the cloud microphysical processes that strengthen and create the outer spiral rainbands, which then increase the local convergence away from the typhoon center and prevent more moisture and energy transport to the inner core of the typhoon. The developed outer rainbands are supposed to bring dry and cold air mass from the middle troposphere to the planetary boundary layer (PBL). The other branch of the cold airflow comes from the evaporation of rain water itself in the PBL while the droplets are falling. Thus, the cut-off of the warm and moist air to the inner core and the invasion of cold and dry air to the eyewall region are expected to bring about the intensity reduction of the modeled typhoon. Therefore, the deepening and maintenance of Typhoon Rananim during its landing are better simulated through the reduction of these two kinds of model errors.     

半刚接框架-斜加劲钢板剪力墙低周反复荷载试验研究

对一榀单跨两层半刚接框架-斜加劲钢板剪力墙结构进行了低周反复荷载试验,分析结构破坏模式和耗能机理,得到了承载力、延性、刚度、耗能能力等指标.结果表明:该种结构具有良好的延性和耗能性能,安全储备高;半刚框架和墙板协同工作良好;斜加劲肋的设置缓解了钢板沿拉力带方向的面外变形,提高了墙体的弹性屈曲倚载及初始刚度,减轻了滞回曲...     

小剪跨比格构式混凝土墙体抗震性能试验

文章旨在研究不同剪跨比的格构式混凝土墙体抗震性能.将生产车间预制成EPS保温模块拼接成墙体模板,在横向和纵向孔洞中分别布置钢筋,然后在孔内浇筑自密实混凝土,形成“EPS新型节能”格构式混凝土墙体,然后对6个参数不同的试件进行低周反复水平荷载作用的试验.结果,墙体破坏形态为:首先墙体相邻格构柱间的连梁出现环状裂缝和“X”...     

霍山皖33井水位与"霍山窗"小震活动关系的初步研究

分析了霍山皖33井水位变化与"霍山窗"地震活动的关系:首先采用差分法和从属函数等方法对水位数据进行处理,提取了水位的短期异常,结果表明该井水位异常对霍山以及周边地区的中小地震有较好的反映;其次,通过对该井水位与"霍山窗"小震活动性的对比研究,发现该地区小地震在水位低值时活跃.参考该地区的环境剪应力,我们认为霍山皖33井...     

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube (CFT) columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens: a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear walls tested.     

2010年浙南地区一次暴雨过程诊断分析

利用常规观测资料、中尺度自动站加密资料、多普勒雷达资料和NCEP1°×1°再兮析资料．对2010年5周8曲日发生在浙南的一次暴雨过程进行了诊断分析,结果发现：此次暴雨是在横槽转竖的大背景下,西风槽和高原槽东移合并加强,并在东移过程中与低层切变共同作用造成的;低空急流的形成在水汽的输送和聚集过程中发挥了重要作用;暴雨过程...     

Shear strength of compacted soil: effects on splash erosion by single water drops

The persistence of soil compaction, caused by farmers' vehicles (tractors wheelings) during the dry season, can affect splash distribution and soil erosion so that surface flow starts at an earlier stage than between the wheelings. To investigate the effects of soil compaction on splash distribution, a dry clayey agricultural soil was compacted in steel cups with a hydraulic piston, and the shear strength was measured with a fall‐cone penetrometer. Two cups were compacted in the same manner, using one to measure the shear strength and the second for splash erosion measurements. A laboratory splash board of 1 m radius, divided into 13 concentric compartments, was used to collect the splashed particles. The water drop diameter used was 4·9 mm falling onto a soil splash cup of 50·2 cm² area from 8 m height with a terminal velocity of 8·8 m s^?1. The spatial distribution of the splashed particles, for different soil compactions, fitted the fundamental splash distribution function (FSDF) model better than the exponential function. The shapes of the curves of this function demonstrated the importance of the source area size; the smaller the cup diameter the better the spatial distribution is expressed by an exponential function. In addition, variability in soil surface conditions contributes to variation in splash characteristics. Detachment rates and average radial distance followed second degree relationships in terms of shear strength. Copyright © 2010 John Wiley & Sons, Ltd.     

Metamorphic history of the South Tibetan Detachment System,Mt. Everest region,revealed by RSCM thermometry and phase equilibria modelling

This study combines microstructural observations with Raman spectroscopy on carbonaceous material (RSCM), phase equilibria modelling and U–Pb dating of titanite to delineate the metamorphic history of a well‐exposed section through the South Tibetan Detachment System (STDS) in the Dzakaa Chu valley of Southern Tibet. In the hanging wall of the STDS, undeformed Tibetan Sedimentary Series rocks consistently record peak metamorphic temperatures of ～340 °C. Temperatures increase down‐section, reaching ～650 °C at the base of the shear zone, defining an apparent metamorphic field gradient of ～310 °C km^?1 across the entire structure. U–Th–Pb geochronological data indicate that metamorphism and deformation at high temperatures occurred over a protracted period from at least 20 to 13 Ma. Deformation within this 1‐km‐thick zone of distributed top‐down‐to‐the‐northeast ductile shear included a strong component of vertical shortening and was responsible for significant condensing of palaeo‐isotherms along the upper margin of the Greater Himalayan Series (GHS). We interpret the preservation of such a high metamorphic gradient to be the result of a progressive up‐section migration in the locus of deformation within the zone. This segment of the STDS provides a detailed thermal and kinematic record of the exhumation of footwall GHS rocks from beneath the southern margin of the Tibetan plateau.     

中天山东部南北两缘韧性剪切带变形特征

(1)中天山北缘韧性剪切带除右旋韧剪变形之外,还发育相对较弱的左旋韧剪变形,局部残留加里东晚期的逆冲推覆韧剪变形;右旋韧剪变形的变形温度环境为中-低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(2)中天山南缘韧性剪切带以右旋韧剪变形为主,兼具左旋韧剪变形;右旋韧剪变形的变形温度环境为中温、中低温、低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(3)东天山存在一系列右旋韧性剪切带,中天山南北两缘韧性剪切带的构造变形与辛格尔断裂、兴地断裂等右旋韧性剪切带的变形以及塔里木北缘东部晚震旦—早古生代地层的同劈理褶皱变形、南天山泥盆纪地层的变形可能具成因联系。