衡山界牌倾滑韧性剪切带的变形特征与应变分析

本文在前人工作的基础上,通过大量的第一手资料,对衡山界牌倾滑韧性剪切带（以下简称该带）的分带、变形特征、形成环境进行了探讨;对该带的几何学、运动学特点进行了分析,计算了该带的变应程度和位移量,并探讨了该带的成因及演化模式。     

香港大屿山残坡积土的残余强度试验研究

粘性土的残余强度是边坡稳定性评价、桩基与土的相互作用机理研究及填土边坡设计中的重要参数。本文在综述大量文献的基础上,结合香港大屿山火山岩风化残坡积土的残余强度试验研究,分析了残余强度的测试方法和影响残余强度的因素。研究结果表明,残余强度与有效法向应力间具有明显的非线性关系;与单剪测试结果相比,多级剪测试结果明显偏高。     

裂纹间动态相互作用的实验观测与理论分析──以共线剪切裂纹归并为例

本文以共线剪切裂纹的归并为例,研究裂纹系的动态相互作用．实验结果表明：在张破裂的意义上,小间距共线剪切裂纹的内端部实际上是阻碍结构,通过迂回弯曲的张破裂归并．本文提出一种估计张破裂扩展途径的近似方法,利用张应力破裂判据找出了潜在的破裂扩展途径的第一近似,较好地模拟了共线裂纹的破裂途径,和现有的数值模拟方法比较,可以大大缩短机时,简化计算程序,保证精确度．本研究结出了岩石剪切破裂“隧道效应”（即破裂跳过障碍体,而障碍体本身不破坏）的机理,还给出了脆性介质在摩擦、磨损过程中碎屑产生的机理．     

Velocity profiles and bed shear stress over various bed configurations in a river bend

Vertical velocity profiles measured over various bed configurations (plane beds, ripples, and dunes) in. the meandering River South Esk, Glen Clova, Scotland are presented on semilogarithmic paper. Local bed shear stress and roughness height are calculated from the lowermost parts of the profiles using the Karman-Prandtl law of the wall; these parameters, and the geometrical properties of the profiles, are related to the various bed configurations. A graphical model is used to identify profiles developed on specific regions of dune geometry, in order to discriminate those profiles that define bed shear effective in transporting sediment over dunes. An assessment is made of the errors involved in estimating local mean velocity from extrapolating the law of the wall to the water surface. A Darcy-Weisbach friction coefficient is related to bed configuration and local stream power.     

A new approximation for pore pressure accumulation in marine sediment due to water waves

The residual mechanism of wave‐induced pore water pressure accumulation in marine sediments is re‐examined. An analytical approximation is derived using a linear relation for pore pressure generation in cyclic loading, and mistakes in previous solutions (Int. J. Numer. Anal. Methods Geomech. 2001; 25 :885–907; J. Offshore Mech. Arctic Eng. (ASME) 1989; 111 (1):1–11) are corrected. A numerical scheme is then employed to solve the case with a non‐linear relation for pore pressure generation. Both analytical and numerical solutions are verified with experimental data (Laboratory and field investigation of wave– sediment interaction. Joseph H. Defrees Hydraulics Laboratory, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 1983), and provide a better prediction of pore pressure accumulation than the previous solution (J. Offshore Mech. Arctic Eng. (ASME) 1989; 111 (1):1–11). The parametric study concludes that the pore pressure accumulation and use of full non‐linear relation of pore pressure become more important under the following conditions: (1) large wave amplitude, (2) longer wave period, (3) shallow water, (4) shallow soil and (5) softer soils with a low consolidation coefficient. Copyright © 2006 John Wiley & Sons, Ltd.     

辽南早元古宙变质热液型金矿床成矿机理探讨

辽南早元古宙辽河群变质岩系中的金矿床为变质热液成因金矿床,矿床的形成与吕梁期变质变形作用关系密切。金矿化带的展布与金矿体的产出受韧性剪切带控制。剪切带内岩石具有明显的动态性组构特征,直接赋矿围岩为辽河群盖县组糜棱岩化千枚岩、变砂岩及云母石英糜棱岩等。韧性剪切带为含矿流体的运移提供通道。作者定义这类金矿床为变质热液型含金剪切带金矿床。     

A numerical method for the study of shear band propagation in soft rocks

This paper investigates the possibility of interpreting progressive shear failure in hard soils and soft rocks as the result of shear propagation of a pre‐existing natural defect. This is done through the application of the principles of fracture mechanics, a slip‐weakening model (SWM) being used to simulate the non‐linear zone at the tips of the discontinuity. A numerical implementation of the SWM in a computation method based on the boundary element technique of the displacement discontinuity method (DDM) is presented. The crack and the non‐linear zone at the advancing tip are represented through a set of elements, where the displacement discontinuity (DD) in the tangential direction is determined on the basis of a friction law. A residual friction angle is assumed on the crack elements. Shear resistance decreases on elements in the non‐linear zone from a peak value at the tip, which is characteristic of intact material, to the residual value. The simulation of a uniaxial compressive test in plane strain conditions is carried out to exemplify the numerical methodology. The results emphasize the role played by the critical DD on the mechanical behaviour of the specimen. A validation of the model is shown through the back analysis of some experimental observations. The results of this back analysis show that a non‐linear fracture mechanics approach seems very promising to simulate experimental results, in particular with regards to the shear band evolution pattern. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental study of extreme shear stress for shallow flow under simulated rainfall

The raindrop impact and overland flow are two major factors causing soil detachment and particle transportation. In this study, the turbulent characteristics of the shallow rain‐impacted water flow were investigated using a 2‐D fibre‐optic laser Doppler velocimetry (FLDV) and an artificial rainfall simulator. The fluctuating turbulent shear stress was computed using digital data processing techniques. The experimental data showed that the Reynolds shear stress follows a probability distribution with heavy tails. The tail probability increases with an increase of rainfall intensity or raindrop diameter, and it decreases with an increase of Reynolds number. A modified empirical equation was derived using both the raindrop diameter and rainfall intensity as independent variables to provide a better prediction of the Darcy‐Weisbach friction coefficient f under rainfall conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Vorticity analysis of the Palmi shear zone mylonites: new insights for the Alpine tectonic evolution of the Calabria–Peloritani terrane (southern Italy)

New microstructural data on the mylonites from the well‐exposed Palmi shear zone (southern Calabria) are presented with the aim to shed light on both the kinematics and the geometry of the southwestern branch of the Alpine belt during Eocene. In the study area, located between the Sardinia–Corsica block and the Calabria–Peloritani terrane, previous large‐scale geodynamic reconstructions suggest the presence of strike–slip or transform fault zones dissecting the southwestern branch of the Alpine belt. However, there are no field data supporting the occurrence of these structures. This paper uses vorticity analysis technique based on the aspect ratio and the long axis orientation of rigid porphyroclasts in mylonitic marbles and mylonitic granitoids, to estimate the contribution of pure and simple shear of deformation during the movement of the Palmi shear zone. Porphyroclasts aspect ratio and orientation were measured on thin sections using image analysis. Estimates of the vorticity number, W_m, indicate that the Palmi shear zone recorded general shear with a contribution of pure shear of c. 65%. Then, the Palmi shear zone can be interpreted as a segment of a left‐lateral transpressive bend along the southern termination of the Eocene Alpine front. Copyright © 2015 John Wiley & Sons, Ltd.     

A diagnostic analysis on the effect of the residual layer in convective boundary layer development near Mongolia using 20th century reanalysis data

Although the residual layer has already been noted in the classical diurnal cycle of the atmospheric boundary layer,its effect on the development of the convective boundary layer has not been well studied. In this study, based on 3-hourly20 th century reanalysis data, the residual layer is considered as a common layer capping the convective boundary layer. It is identified daily by investigating the development of the convective boundary layer. The region of interest is bounded by(30°–60° N, 80°–120° E), where a residual layer deeper than 2000 m has been reported using radiosondes. The lapse rate and wind shear within the residual layer are compared with the surface sensible heat flux by investigating their climatological means, interannual variations and daily variations. The lapse rate of the residual layer and the convective boundary layer depth correspond well in their seasonal variations and climatological mean patterns. On the interannual scale, the correlation coefficient between their regional averaged(40°–50°N, 90°–110° E) variations is higher than that between the surface sensible heat flux and convective boundary layer depth. On the daily scale, the correlation between the lapse rate and the convective boundary layer depth in most months is still statistically significant during 1970–2012. Therefore, we suggest that the existence of a deep neutral residual layer is crucial to the formation of a deep convective boundary layer near the Mongolian regions.