大别变质地体的构造样式及变形序列

大别山区晚太古代大别群变质岩系,经历了复杂的变形过程。在大别变质地块内部识别出两套大型剪切带,它们在该区构造格架形成过程中起着重要的作用。本文还分析了变质的上壳岩、片麻岩和剪切带内的变形特点。实际资料说明,剪切带内的褶皱是由于剪切的不稳定性及平行面理局部缩短形成的,这些大型地壳剪切作用多伴随有挤压流动或伸展流动。根据褶皱叠加关系以及剪切带、新成体交切关系建立了大别群总体构造序列。该区提供了一个研究中下地壳作用的窗口。     

Shear resistance of jointed rock masses and stability calculation of rock slopes

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.     

非线性弹性模型的改进

本文在邓肯-张模型进行深入探讨的基础上,提出了切线模量实质物理意义是剪切模量的观点,并分别采用应力法和应变法推导了剪切模量和体积模量(或变形模量)公式,还进行了考虑Biot固结非线性弹性油罐地基有限元实例分析。对不同的变形模量计算方法进行了比较,提出了改进的非线性弹性模型。     

Mineral composition variation in Alpine Schist, Southern Alps, New Zealand: Implications for recrystallization and exhumation

Abstract Compositional variation of silicates (plagioclase, K-feldspar, epidote, titanite, garnet, white mica, biotite, chlorite), ilmenite, carbonates (calcite, ankerite) and apatite, in quartzofeldspathic lithologies of the Alpine Schist, New Zealand, is discussed in terms of increasing metamorphic grade and possible isograd-producing reactions. The mineral data, in conjunction with geological considerations, are used to determine polychronous P-T arrays of an early high P/T event (c. 16°C/kb; 5°C/km) overprinted by a lower P/T event (c. 50°C/kb; 15°C/km) that provides an estimation of Mesozoic and Cenozoic exhumation of schist of 11 to 13 km and 19 to 22 km respectively. The effects of possible shear heating and recrystallization to form K-feldspar zone schist near the Alpine Fault is consistent with movement along a mid to lower crustal detachment surface during Cenozoic shortening, and near isothermal exhumation of the schists to form the Southern Alps.     

Calculated and observed seismic behaviour of exposed upper mantle

In order to determine the seismic properties of rocks representing the continental crust/upper mantle transition, a structural and petrographical study of peridotites of the Ivrea-Verbano zone (N. Italy) has been undertaken. The seismic behaviour (Vp, Vs, birefringence, orientation of the fast shear-wave polarisation plane) has been calculated from the modal composition of rock samples, together with the crystallographic preferred orientation and the single crystal elastic constants, using the methods of Mainprice (1990). It is shown that the intrinsic anisotropy of peridotites is mainly due to the lattice preferred orientation (LPO) of olivine and to the competing effects due to the LPO of orthopyroxene. If present, well-oriented hydrous phases such as phlogopite, leads to both P- and S-waves velocities becoming drastically reduced, but the anisotropy and the S-wave splitting (mainly on the foliation plane) is increased. An attempt has been made to apply this petrologic and microstructural approach to understand the seismic properties of ultramafic rocks with the aid of a mobile seismic network set up in the Ivrea-Verbano zone. Five recording units with 3-component geophones were installed on the most representative lithologies of the Ivrea-Verbano zone: kinzigites, gabbros, stronalites, and on metapelites of the adjacent outcrop of the Serie dei Laghi. During five months the seismic network recorded 49 events that were mainly regional earthquakes. The preliminary analysis of the first arrival revealed a high-velocity anomaly near the Finero ultramafic massif. Rough calculations indicated that this anomaly could be due to a shallow-depth, peridotitic body about six kilometres thick. S-wave polarisation analysis was carried out on the horizontal components of the seismograms of four regional earthquakes that showed a first arrival propagating almost vertically at the recording sites. Four earthquakes were chosen in order to reconstruct the orientation of the polarisation plane of the shear phases. The preliminary results of this analysis have shown a qualitatively good agreement between the orientation of the polarisation plane of the fast shear-wave and the strike of the foliation at the station near Finero, located on kinzigites of the Ivrea-Verbano zone, although the relationships between the local structural setting and the polarisation orientations at the other recording sites is not yet so clear.     

吉南早元古代集安群构造解析

早元古代集安群经历了三期构造变形，分别形成了三个特征各异的构造形迹组合。Ⅰ世代为层理褶皱组合，由平卧褶皱、轴面片理和韧性剪切变形带组成；Ⅱ和Ⅲ世代为片理褶皱组合，分别由各种位态的片理褶皱和轴面褶劈理、膝折面理组成；Ⅰ、Ⅱ世代的原始构造线方位均为近南北向，为近共轴叠加，但因Ⅲ世代构造的强烈改造，现今多变位为东西向。Ⅰ世代构造形迹组合的特征显示集安群的早期构造环境具有构造层次较深、以近水平韧性剪切变形作用为主导的特点。     

长乐—南澳断裂带东山段剪切变形与剪切加热作用

本文在系统的有限应变测量的基础上,对闽东南长乐—南澳断裂带东山段剪切变形特征进行了分析:利用变形石英显微亚结构。(动态重结晶颗粒)估算了剪切带内古应力并(σ—σ_3):通过对剪切变形能密度分布W(x)格离散化计算,采用有限差分数值近方法,获得了剪切热数值解:最后总结了研究地区剪切变形,剪切加热与动热成岩成矿作用的相对时空关系以及长乐—南澳断裂域构造意义     

海南戈枕韧性剪切带微观构造研究

韧性剪切带的定性－定量分析。能更清晰、直接地揭示构造运动生发发展过程应力、应变的状况。作者对海南戈枕韧性剪切带从显微构造角度作了系统研究工作。通过矿物粒度、形态比统计，在纵横方向上更明确了内部的复杂分带性；通过显微批向构造、矿物组权及变形变晶分析了探讨了构造活动的方式、方向；通过古应力值、剪应变、总位移量、弗林系数的测算，定量表述了该带变形机制及应力、应变速率大小。     

断裂带的韧-脆性转化与成矿

根据河南西部绿岩型脉状金矿的一些地质现象,探讨了韧性剪切带转化为脆性断裂的机制.韧性剪切过程岩石的面理化为矿液参与断裂作用,增加流体压力创造了条件.流体压力的增加一方面可以改变断裂的力学性质;另一方面可以压裂围岩,促进断裂韧-脆性转化,为脉状矿床的形成创造了条件.