Measurement and research method of metallogenic depths of Jiaojia orefield and Linglong orefield Shandong Province, China

Taking the contribution of the tectonic force to the total hydrostatic pressure into account, the author puts forward a new method on the calculation of the depth of petrogenesis and metallogenesis which is summarized as follows: first the tectonic added hydrostatic pressured P_s is subtracted from the total hydrostatic pressure P, then using their difference P_r, according to the general method the depth of petrogenesis and metallogenesis can be determined in consideration of lateral constraint. By the new method the following data on the depths of the metallogenesis are obtained: 2 243.6 m (No. I and No. II veins with metallogenic epoch of 105 Ma) and 1 632. 38 m (No. III vein with 105 Ma) for Jiaojia orefield, and 3 454.97 m (NE-trending zone with 213.2 Ma), 1 902.79 III (ENE-trending zone with 100.28 Ma), 1 090.97 m (NE-trending zone with 80.67 Ma) and 720.55 m (NNE-trending zone with 71.86 Ma) for Linglong orefield. Project supported by the Foundation of the State Planning Commission, China and the Foundation of the State Science and Technology Commission, China.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.     

大地电磁二维对称各向异性介质的有限元数值模拟

假定垂直轴为二维对称各向异性介质主轴之一，构造走向与另一主轴方向成任一夹角，用伽勒金（Ｇａｌｅｒｋｉｎ）有限元法和矩形网格，优化地合成总体刚度矩阵，使二维各向异性介质的基本方程形成有限元代数方程组，求出各节点场值，并利用ＭＯＭ法求出辅助场，进而求出张量阻抗等响应函数．同时还对有关文献的计算模型进行了数值模拟检验     

吉林-日本区深震特征及板块俯冲图像分析

根据USCS地震资料：分析了吉林-日本深震区地震的深度特征．结果表明：吉林-日本深震区地震位于太平洋板块与欧亚大陆板块的交界带上．其北支地震活动强于南支．同时也揭示了该区地震深度、地震频次以及地震能量之间的关系．指出其最容易发生强震的地震层位在570-580km左右。由深度资料推断板块间的作用方式，太平洋板块向欧亚大陆的挤压是一个由浅入深的过程，在不同的部位其俯冲角度与俯冲距离是不一样的，一般来说，倾角越大，俯冲越陡．水平延伸距离越短；反之，倾角越小．俯冲越平缓，水平延伸距离越长。     

基于矩形网格的有限差分走时计算方法

对于大多数速度场，地震波沿射线传播的初至波走时，可以用有限差分外推的方法在二维或三维数值网格上计算出来. 在保证精度的条件下，为提高计算效率和适应性，本文推导了基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法. 另外，该方法对首波和散射波做了合适的处理，而且不会碰到传统射线法存在的阴影区和焦散区等问题. 简单模型和复杂的Marmousi模型试算的结果表明，该方法精度较高并适用于强纵、横向变速的复杂介质. 基于该方法的Kirchhoff叠前深度偏移, 在主要构造和目的层位置的成像效果上基本达到了波动方程法叠前深度偏移的位置成像效果. 由于未考虑续至波等有效能量，在成像的保幅性上不如波动方程法叠前深度偏移的效果，但其计算效率则明显高于全格林函数法和波动方程法.      

Influence of the total atmospheric optical depth and cloud cover on solar irradiance components

Broadband solar irradiance data obtained in the spectral range 400–940 nm at Kwangju, South Korea from 1999–2000 have been analyzed to investigate the effects of cloud cover and atmospheric optical depth on solar radiation components. Results from measurements indicate that the percentage of direct and diffuse horizontal components of solar irradiance depend largely on total optical depth (TOD) and cloud cover. During summer and spring, the percentages of diffuse solar irradiance relative to the global irradiance were 5.0% and 4.9% as compared to 2.2% and 3.0% during winter and autumn. The diffuse solar irradiance is higher than the direct in spring and summer by 24.2%, and 40.6%, respectively, which may largely be attributed to the attenuation (scattering) of radiation by heavy dust pollution and large cloud amount. In cloud-free conditions with cloud cover ≤2/10, the fraction of the direct and diffuse components were 66.0% and 34.0%, respectively, with a mean daily global irradiance value of 7.92±2.91 MJ m⁻² day⁻¹. However, under cloudy conditions (with cloud cover ≥8/10), the diffuse and direct fractions were 97.9% and 2.2% of the global component, respectively. The annual mean TOD under cloudless conditions (cloud cover≤2/10) yields 0.74±0.33 and increased to as much as 3.15±0.67 under cloudy conditions with cloud amount ≥8/10. An empirical formula is derived for estimating the diffuse and direct components of horizontal solar irradiance by considering the total atmospheric optical depth (TOD). Results from statistical models are shown for the estimation of solar irradiance components as a function of TOD with sufficient accuracy as indicated by low standard error for each solar zenith angle (SZA).     

水域静力触探设备的研制和应用

为详细了解崇明越江通道南港隧道段地层情况 ,设计要求提供长江水域静探资料。简介了我院水域静力触探设备的研制和应用情况     

Method of high-density seismic imaging ex-ploration and application samples

Introduction Now, shallow seismic reflection wave technique has been used extensively in geological ex-plorations of bridge, dam, high building and so on. Since shallow seismic reflection wave tech-nique is often implemented in industrial zone or city with dense population, the background dis-turbance including industrial noise, life noise, etc is very serious. Furthermore, the disturbance of seismic source is also serious due to short array length and offset of the method. In general, shal-lo…     

叠前深度偏移述评

叠前深度偏移是理想的改善复杂地区和强横向速度变化的地震资料成像技术,笔者就4种典型叠前深度偏移方法的理论基础与技术特点,存在的问题及国内外最新进展进行了讨论.     

红透山矿床变质岩系褶皱构造特征浅析

红透山式铜-锌矿床形成于太古代克拉通裂谷槽盆中海底火山喷发-沉积环境。因此，矿床的空间展布严格受特定的含矿岩系所控制。槽盆构造中的岩层褶皱构造最发育，矿床赋存在具多期褶皱构造叠加的大型同倾向形褶皱内，褶皱的层间虚脱是控矿有利构造空间，可以借此预测矿体侧伏方向及赋存部位。