河南省栾川县红庄-元岭金矿床原生晕轴向分带特征及深部成矿远景评价

红庄-元岭金矿床位于豫西熊耳山金及多金属成矿带南亚带上,是近年来发现的中型金矿床。通过对该矿床地质特征、成晕元素共生组合及分带特征的研究,认为该区原生晕分带序列整体为正常序列,49号勘探线中存在前缘晕元素与近矿晕元素叠加共存的现象。地球化学参数反映了该区成矿具多期多阶段的特点,部分参数在深部有向高值转折的趋势,Au及近矿晕元素异常规模向深部具有增大趋势,表明深部有一定找矿潜力。结合原生晕轴向序列特征及地球化学参数、异常规模随深度的变化特征,认为浅部找矿的重点应放在海拔约400m以上,攻深找盲的重点应放在海拔300m以下。     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.     

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.     

Sensitivity of the elastic anisotropy and seismic reflection amplitude of the Eagle Ford Shale to the presence of kerogen

The Eagle Ford Shale of Central and South Texas is currently of great interest for oil and gas exploration and production. Laboratory studies show that the Eagle Ford Shale is anisotropic, with a correlation between anisotropy and total organic carbon. Organic materials are usually more compliant than other minerals present in organic‐rich shales, and their shapes and distribution are usually anisotropic. This makes organic materials an important source of anisotropy in organic‐rich shales. Neglecting shale anisotropy may lead to incorrect estimates of rock and fluid properties derived from inversion of amplitude versus offset seismic data. Organic materials have a significant effect on the PP and PS reflection amplitudes from the Austin Chalk/Upper Eagle Ford interface, the Upper Eagle Ford/Lower Eagle Ford interface, and the Lower Eagle Ford/Buda Limestone interface. The higher kerogen content of the Lower Eagle Ford compared with that of the Upper Eagle Ford leads to a negative PP reflection amplitude that dims with offset, whereas the PS reflection coefficient increases in magnitude with increasing offset. The PP and PS reflection coefficients at the Austin Chalk/Upper Eagle Ford interface, the Upper Eagle Ford/Lower Eagle Ford interface, and the Lower Eagle Ford/Buda Limestone interface all increase in magnitude with increasing volume fraction of kerogen.     

Procedures for calibration of linear models for damage limitation in design of masonry‐infilled RC frames

Recent earthquakes have confirmed the role played by infills in the seismic response of reinforced concrete buildings. The control and limitation of damage to such nonstructural elements is a key issue in performance‐based earthquake engineering. The present work is focused on modeling and analysis of damage to infill panels, and, in particular, it is aimed towards linear analysis procedures for assessing the damage limitation limit state of infilled reinforced concrete frames. First, code provisions on infill modeling and acceptance criteria at the damage limitation limit state are reviewed. Literature contributions on damage to unreinforced masonry infill panels and corresponding displacement capacity are reported and discussed. Two procedures are then proposed aiming at a twofold goal: (i) the determination of ‘equivalent’ interstory drift ratio limits for a bare frame model and (ii) the estimation of the stiffness of equivalent struts representing infill walls in a linear model. These two quantities are determined such that a linear model ensures a reliable estimation of seismic capacity at the damage limitation limit state, providing the same intensity level as that obtained from nonlinear analyses carried out on structural models with infills. Finally, the proposed procedures are applied to four‐story and eight‐story case study‐infilled frames, designed for seismic loads according to current technical codes. The results of these application examples are presented and discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness

Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls. Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd.     

三维层状黏弹性半空间中球面SH、P和SV波源自由场

采用刚度矩阵方法结合Hankel积分变换,求解了层状黏弹性半空间中球面SH、P和SV波的自由波场.首先,在柱坐标系下建立层状黏弹性半空间的反轴对称(柱面SH波)和轴对称(柱面P-SV波)情况精确动力刚度矩阵.进而由Hankel变换将空间域内的球面波展开为波数域内柱面波的叠加,然后将球面波源所在层的上下端面固定,求得固定层内的动力响应和固定端面反力,将固端反力反向施加到层状黏弹性半空间上,采用直接刚度法求得固端反力的动力响应,叠加固定层内和固端反力动力响应,求得波数域内球面波源动力响应.最后由Hankel积分逆变换求得频率-空间域内球面波源自由场,时域结果由傅里叶逆变换求得.文中验证了方法的正确性,并以均匀半空间和基岩上单一土层中球面SH、P和SV波为例分别在频域和时域内进行了数值计算分析.研究表明基岩上单一土层中球面波自由场与均匀半空间情况有着本质差异;基岩上单一土层中球面波位移频谱峰值频率与场地固有频率相对应,基岩面的存在使得基岩上单一土层地表点的位移时程非常复杂,振动持续时间明显增长;阻尼的增大显著降低了动力响应的峰值,同时也显著减少了波在土层的往复次数.     

An example of slip instability resulting from displacement-varying strength

A rock cylinder, containing a clay-filled sawcut making an angle of 30° to the sample axis, was deformed at constant confining and pore pressures and constant remote shortening rate. The sawcut surfaces contained a series of regularly spaced ridges and grooves oriented perpendicular to the direction of shear. The interaction of these grooved surfaces resulted in a sliding strength which varied periodically with displacement. By varying the effective machine stiffness through the use of an electronic feedback circuit, a range of stable and unstable slip behavior was achieved. In this way, we examined fault slip behavior which was dominated by displacement-dependent strength.     

Effectiveness of simple approaches in mitigating residual deformations in buildings

Developments in performance‐based seismic design and assessment approaches have emphasized the importance of considering residual deformations. Recent investigations have also led to a proposed direct displacement‐based design (DDBD) approach which includes an explicit consideration of the expected residual deformations as an integral part of the design process. Having estimated the expected residual deformations in a structure, engineers are faced with the problem of reducing them to meet the targeted performance levels under pre‐defined seismic hazard levels. Previous studies have identified the post‐yield stiffness as a primary factor influencing the magnitude of residual deformations in single degree of freedom and multiple degree of freedom structures. In this paper, a series of simple approaches to increase the post‐yield stiffness of traditional framed and braced systems for the purpose of reducing residual deformations are investigated. These methods do not utilize recentring post‐tensioned technology. This contribution addresses the feasibility of altering the lateral post‐yield stiffness of structural systems by: (i) using different reinforcement materials with beneficial features in their stress–strain behaviour; (ii) re‐designing the section geometry and properties of primary seismic‐resisting elements; and (iii) introducing a secondary elastic frame to act in parallel with the primary system. The efficiency of each of these techniques is investigated through monotonic and cyclic moment‐curvature and non‐linear time‐history analyses. Of these approaches the design and introduction of an elastic secondary system was found to be most effective and consistent in reducing residual deformations. A simplified design approach for achieving the desired increase of a system's post‐yield stiffness is also presented. Copyright © 2007 John Wiley & Sons, Ltd.     

圆形板基础下地基强度和变形非线性性状研究

采用Drucker弹塑性模型、SAP91非线性有限元程序、Vizi CAD微机有限元前后处理系统计算、分析了轴对称问题，即圆形板情况下，基础板几何尺寸、基础刚度、边界条件、基础埋深对基础沉降量、塑性区开展的影响，结果表明基础沉降随基础几何尺寸增大而增大，随基础刚度、埋深的增大而减小；基础刚度、几何尺寸、埋深的加大都能提高地基承载力。