新型珊瑚海水混凝土力学性能试验研究

为了解决全珊瑚海水混凝土(coral aggregate seawater concrete,简称CASC)的脆性问题,采用碱式硫酸镁水泥(basic magnesium sulfate cement,简称BMSC)为胶凝材料和剑麻纤维为增韧材料制备了一种新型全珊瑚海水混凝土(NCASC),系统测定了基本力学性能,并与普通硅酸盐水泥制备的CASC、碱式硫酸镁水泥砂石混凝土(basic magnesium sulfate cement concrete,简称BMSCC)、普通砂石混凝土(ordinary portland cement concrete,简称OPC)以及普通轻骨料混凝土(lightweight aggregate concrete,简称LAC)的力学性能进行对比。结果表明:立方体抗压强度(f_(cu),m)在15~35 MPa范围内的NCASC的轴心抗压强度(f_c,m)、劈裂抗拉强度(f_(sp),m)与f_(cu),m之间具有较显著的线性关系;对于f_(cu),m为15~35 MPa的混凝土,相同强度NCASC的f_c,m高于OPC、LAC及BMSCC,其f_c,m与f_(cu),m比值最大,大致在0.85~0.96之间,NCASC的f_(sp),m比OPC和LAC高,但比BMSCC低,且随着强度的提高,OPC与NCASC的f_(sp),m间的差距在增大,而LAC和BMSCC与NCASC的f_(sp),m间的差距在缩小;在强度等级C15~C55的范围中,NCASC和CASC的f_(sp),m、f_c,m与f_(cu),m之间的关系基本可以采用相同的线性回归方程来描述,利用这两个回归线性方程得到对应于标准强度等级的CASC和NCASC的f_(sp),m和f_c,m数据,为CASC力学性能研究与结构设计提供参考依据。     

利用消去刚度法进行剪切型系统物理参数识别

提出了 1种能够比较准确地识别剪切型体系的结构参数 (各层质量和层间刚度 )的方法———消去刚度法。该方法从剪切型结构体系的特征值问题出发 ,利用剪切型结构系统质量矩阵和刚度矩阵的特殊形式 ,通过消去各层的刚度系数 ,得到了结构系统的各层质量比表达式。在结构总质量已知的情况下 ,仅利用系统的任意两阶模态信息就可以确定出各层质量 ,并进而计算出层间刚度 ,实现了结构物理参数的递推识别。数值模拟结果表明 ,该方法识别精度较高 ,便于工程应用 ,可以用于类似结构体系的物理参数的初步估计。     

Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.     

Lateral cyclic response of an aluminum model pile in sand

Lateral cyclic load tests were performed on an aluminum model pile in dry sand. Two levels of loading were adopted to represent different service load conditions. The maximum number of loading cycles was 1,000. From the test results, it was found that the even though in the service load condition, the pile response was still affected by cyclic effects and a larger load level would produce more significant influence. In a global point of view, the lateral displacement and maximum moment increased with loading cycles, while the secant stiffness within a cycle decreased with cycles. The cyclic effect was more significant on the lateral displacement than on the moment. In a local point of view, cyclic loading would degrade the equivalent subgrade stiffness for the soil shallower than about seven times diameter. In addition, the secant subgrade stiffness within a cycle increased with loading cycles. Some experimental relationships of lateral pile response and loading cycles were built and compared with those in the literature.     

Improvement of the axial trapping effect using azimuthally polarised trapping beam

A dual optical tweezers system, which consists of a doughnut mode optical tweezer (DMOT) with the azimuthally polarised trapping beam and a solid mode optical tweezer (SMOT) with the Gauss trapping beam was constructed to compare the axial trapping effect of DMOT and SMOT. The long-distance axial trapping of ST68 microbubbles (MBs) achieved by DMOT was more stable than that of SMOT. Moreover the axial trapping force measured using the viscous drag method, was depended on the diameter of the particle, the laser power, and the numerical aperture (NA) of the objective lens. The measurement of the axial trapping force and the acquisition of CCD images of trapping effect confirmed that the DMOT showed excellent axial trapping ability than SMOT. A simple and effective method is developed to improve axial trapping effect using the azimuthally polarized beam as trapping beam. This is helpful for the long-distance manipulating of particles especially polarised biological objects in axial direction.     

屈曲约束支撑滞回曲线模型和刚度方程的建立

针对屈曲约束支撑,本文根据其反复荷载作用下的滞回特征,提出了一种滞回模型,并建立了屈曲约束支撑的弹塑性刚度方程。根据这种模型编制程序模拟绘制了屈曲约束支撑的滞回曲线,将模拟计算曲线与试验所得曲线进行对比,对比结果表明本文所提模型是准确、有效的。     

高层隔震建筑设计中隔震支座受拉问题分析

高层建筑由于高宽比相对较大,倾覆效应明显,当采用隔震技术时,有可能使隔震支座出现拉应力,而通常使用的叠层橡胶隔震支座抗拉能力不强。因此,隔震支座受拉问题成为隔震技术在高层建筑中推广应用的主要障碍之一。本文提出了避免隔震支座受拉的上部结构布置原则及隔震层优化设计方法,并对目前隔震支座拉应力计算方法提出了改进建议。本文的研究工作可为工程设计提供借鉴,为隔震设计相关规范的修订提供依据。     

主动变刚度-阻尼系统预测最优控制的理论与试验研究

介绍了一种具有自主知识产权的新型开关控制型半主动控制系统——主动变刚度.阻尼(AVS.D)系统的减振控制机理,建立了AVS.D结构振动控制体系的运动方程。为了合理补偿AVS.D系统实时控制过程中不可避免地存在着的控制时滞,本文提出一种预测最优控制算法,推导了其开关控制律。为了检验AVS.D系统的减震控制效果及预测最优控制算法的有效性,我们设计研制出AVS.D装置,编制了AVS.D系统预测最优控制的实时控制软件,在某单层钢框架模型上进行了AVS.D系统的模拟地震振动台试验,比较了不同控制方式时的减震效果。研究结果表明,本文所提出的预测最优控制算法是非常有效的,可推广应用于所有开关控制型半主动控制系统。AVS.D系统具有反应放大功能,经济可靠、安全有效,可望有较好的工程应用前景。     

含盐量对水泥土强度影响的室内试验研究

通过含盐量对非有机质土加固强度影响的试验研究,得到了含盐量对水泥土强度的提高或减小的阈值为3.5%。当盐渍土的含盐量低于这个阈值时,盐渍土的加固强度会因可溶性盐的结晶膨胀作用,提高水泥土的强度;相反当盐渍土的含盐量高于该阈值时,盐渍土的强度会因可溶性盐的过多的结晶膨胀作用,使水泥土的结构遭到破坏,从而使水泥土的强度大大降低。同时分析了可溶性硫酸盐、镁盐和氯盐对水泥土的浸蚀性作用,并从盐类对水泥土强度的影响从机理上进行了阐释,提出了高含盐量对水泥土破坏作用的对策。     

Correlation between point load index and compressive strength for quartzite rocks

Summary The relationship of the point load test with uniaxial compressive strength was examined using quartzite rocks to substantiate the existing correlations.