Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

止水帷幕在高层建筑深基坑中的应用

某高层建筑基坑西侧紧邻一道河沟,水量较大,采取三重管高压摆喷帷幕止水[1～4],施工完成后通过监测,未发现渗漏、地下水位明显下降和周围建筑物沉降现象。     

浅述五大连池火山区浅层气体钍、氡与断裂构造和火山活动的关系

在五大连池火山区流体化学研究原有工作的基础上，对火山群的重要区段开展了野外踏勘、气体普查，特别是用放射性气体测量方法对火烧山、老黑山、笔架山、药泉山等火山区进行了Tn、Rn测量。通过大量实测资料，分析和研究了Tn、Rn等气体和火山、火山活动、断裂构造、断裂活动性及其他地质条件的关系，初步查明了五大连池火山区的气体组成特征、分布和形成规律，对地下主要气体的成因、气体和火山构造活动及其它地质条件的关系进行了初步探讨，并提出了对五大连池火山区气体观测的初步设想和建议。     

利用SV分量接收函数反演地壳横波速度结构

详细讨论了远震体波SV分量接收函数的特点及其在反演地壳S波速度结构中的优势．与径向接收函数类似，SV分量接收函数可通过对远震体波的SV分量直接反褶积P分量获得．研究分析表明:与径向接收函数相比，SV分量接收函数的振幅随震中距的变化更加稳定，波形简单且突出了对结构最敏感的PS转换波信息．理论数值实验显示:在反演地壳S波速度结构时，SV分量接收函数比径向接收函数具有更好的收敛性．作为实例，利用SV分量接收函数反演方法反演了海拉尔台下的S波速度结构．      

松潘-甘孜造山带地壳速度结构

位于川西地区的奔子栏——唐克深地震测深剖面以NNE走向穿越松潘——甘孜造山带．根据人工地震记录分析得到的震相走时和相关的振幅信息，确定了该剖面二维P波地壳速度结构．剖面的地壳结构可分为5层，其中第1，2，3层为上地壳；第4，5层为下地壳．上地壳中部普遍存在低速异常带，但龙日坝以北，这一低速带与其上覆的低速基底合为一体．同时，沿剖面的地壳速度结构具有较强的横向变化．据此，可将剖面分为4段，即甘孜——理塘断裂以南、甘孜——理塘断裂至鲜水河断裂、鲜水河断裂至龙日坝断裂和龙日坝断裂以北. 这与区域构造划分基本一致． 地壳厚度沿测线从南西向北东逐渐减薄，即从金沙江畔的62 km减小到黄河附近的52 km． 根据PmP震相分析，莫霍界面深度在鲜水河断裂两侧没有明显变化．全剖面的地壳平均速度较低，为6.30 km/s．奔子栏——唐克剖面揭示了该地区的造山带型地壳上地幔结构特征．鲜水河断裂带位于剖面的中部，该地区的上地壳速度为正异常，而下地壳和上地幔顶部存在负异常．笔者认为，这是一类有利于强震孕育和发生的深部构造环境．      

复杂体型高层结构的推覆分析方法和应用

本文对钢筋混凝土高层结构进行了推覆分析研究，并编制了相应的推覆分析计算机程序。为了满足复杂体型高层结构的需要，提出了多种类型的单元，包括梁柱单元、单片墙单元、三垂直杆墙元和简体墙单元，与试验结果对比分析表明这些模型具有很好的精度，并且能够搜索到结构反应的全过程，甚至结构的软化阶段。最后对一栋具有复杂体型的高层结构实际工程进行了推覆分析研究，为结构设计提供了实用的参考依据。     

异型柱框架结构抗震设计研究

本文在充分考虑钢筋混凝土异型柱框架结构受力特点的基础上，从结构布置、内力组合与调整、轴压比限值和其他构造措施等方面，针对抗震计算和概念设计进行了分析与讨论，得出注重抗震计算分析、加强抗震概念设计等结论，分析过程和有关结论可供工程设计人员参考。     

高耸塔架结构节点损伤基于神经网络的两步诊断法

本文针对高耸钢塔架结构的损伤特点，建立了具有节点损伤的有限元模型，提出了一种分层神经网络两步诊断法：第一步，由基于区域残余力理论的第一层神经网络进行结构损伤区域的初诊；第二步，由基于应变模态理论的第二层神经网络进行损伤区域内的具体损伤节点位置和程度的诊断。对一平面塔架结构的数值仿真分析表明：本文提出的损伤诊断方法的结果是令人满意的。