生态地理建模中的多尺度问题

本文在分析生态地理建模内涵的基础上,讨论了生态地理建模中的尺度转换问题、跨尺度相互作用问题、空间尺度与时间尺度的关联问题和多尺度数据处理问题.由于生态地理问题的非线性、生态环境的异质性和随机事件,简单的线性尺度转换方法远不能满足生态地理建模的要求.为了从根本上解决生态地理建模中的时空尺度问题,除需要运用微分几何学和等级理论等经典方法外,还需要引入格点生成法和网格计算等现代理论和技术手段.     

油气差异泵吸作用机理探讨——以泌阳凹陷为例

通过对泌阳凹陷油气成藏过程的系统研究,发现在差异抬升过程中,深凹源岩区抬升幅度小,凹陷四周圈闭发育区抬升幅度大,差异抬升运动导致源岩和圈闭之间的势能差急剧增大,从而促使油气大规模沿砂体向圈闭充注,这一过程类似于水泵抽水的过程,据此,文中提出了油气泵吸作用和油气差异泵吸作用的概念及机理,并以泌阳凹陷为例讨论了油气差异泵吸作用的形成条件、主要影响因素及油气差异泵吸作用对油气差异分布的控制作用。研究表明:影响油气差异泵吸作用的因素主要有势能梯度、通道质量和泵源配置及油气运移距离;泌阳凹陷油气分布总体上受成藏运聚系统的控制,在各运聚系统内油气分布受油气差异泵吸作用的控制,其中势能梯度、泵源配置及油气运移距离是影响油气差异分布的主要因素,而在每一个大泵(复合泵)内部,通道质量差异是影响油气差异分布的主要因素。     

柯坪塔格推覆构造几何学、运动学及其构造演化

大量野外构造地质调查和深部构造解释表明柯坪塔格推覆构造由多组倒转复式背斜、复式箱状背斜构成的推覆体及其前缘逆冲断裂组成 ,由寒武系—第四系组成的推覆体由北向南逆—斜冲 ,平面上构成向南凸出的弧形推覆构造 ;普昌断裂由各不相连的逆冲斜冲断裂段组成 ,而不是完整的一条走滑断层 ,各推覆体前缘逆冲断裂与各推覆体的普昌断裂段共同构成统一的前缘逆冲斜冲逆冲断裂和推覆构造系统 ;普昌断裂段以西的推覆体具有向东抬升、向西倾覆的鼻状构造特征 ,普昌断裂段以东的推覆体具有向西抬升、向东倾覆的鼻状构造特征 ,普昌基底隆起带是巴楚隆起隐伏在柯坪塔格推覆构造之下的部分。各推覆体前缘断裂在深部均归并于统一的寒武系底部的滑脱面 ,其南浅北深 ,东浅西深 (普昌隆起带以西 )或西浅东深 (普昌隆起带以东 ) (6 10km ) ,埋深较大区发育多组滑脱面。柯坪塔格推覆构造的形成时期为晚第四纪 ,为现今活动的推覆构造系统。文中认为各推覆体向南西的倾覆端基底滑脱面和中新生界内部的滑脱面没有贯通 ,是未来 6级以上地震的发震构造部位。     

天然气水合物体系动态演化研究（I）：地质历史演变

1995年Dickens对55．5Ma前古新世末增温事件进行了研究，提出天然气水合物作为全球环境变化重要因子的假说．认为古新世末增温事件溶解无机碳-2～-3‰的^13δC位移可以用水合物所含甲烷的释放与随后氧化成二氧化碳来解释．此后，地质历史演变中的天然气水合物演化研究蓬勃发展，本文总结古新世末增温事件、新元古代末期雪球事件、第四纪千年尺度事件等最新进展，为天然气水合物动态演化研究提供基础．开展天然气水合物-天然气体系动态演化过程数值模拟与特征分析，可望促进天然气水合物在全球变化与碳循环中作用的深入认识．     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

SOIL CONSERVATION EFFICIENCY OF DIFFERENT MODELS CONVERTING FROM STEEP FARMING SLOPE PLOTS IN YA''''AN, SICHUAN, CHINA

Converting farming slope land into artificial forestland or grassland is a major measure of soil/water conservation. Five conversion practices, namely, 1) a control plot still tilled with a crop (maize), 2) a folder grass-growing plot seeded with Lolium perenne , 3) a young alder tree-growing plot, 4) a pear orchard plot and 5)a bamboo plot intercropped with folder grass, were monitored to compare the soil conservation efficiency of those changes in Ya'an, Sichuan for 3 years between September 1998 and August 2001. Results showed that the 5 designed converting models functioned differently in erosion control. The most effective model was bamboo groves intercropped with folder grass (Lolium perenne). The folder grass (Lolium perenne) growing model was more effective than the pure pear orchard model. The least effective model was the young alder tree-growing slope, which was even less effective than the control (a slope without converted cultivation). Meanwhile, changes in the soil's physical properties r     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.