矿山滑坡天线阵列变形监测系统的方案与测试

首先阐明地质灾害监测的重要性和必要性,然后分析了目前应用于滑坡安全监测自动化远程监测设备和技术,并重点介绍了GPS天线阵列变形监测系统,接着根据某矿山的一个滑坡现场,进行GPS天线阵列监测方案设计,并在实地进行数据采集测试,最后对采集数据进行处理,对几期结果的较差和精度进行分析,得出在矿山自动化监测技术中,GPS天线阵列变形监测系统是一种性价比很高的监测技术,很适合滑坡安全监测。     

Establishment and application of an intelligent treating method for oil spill identification

In the identifying process of an oil spill accident, manual integral and artificial visual comparison are commonly used at present to determine the oil spill sources, these methods are time-consuming and easily affected by human factors. Therefore, it is difficult to achieve the purpose of rapid identification of an oil spill accident. In this paper, an intelligent method of automatic recognition, integration and calculation of diagnostic ratio of Gas Chromatography-Mass Spectrometer (GC/MS) spectrum are established. Firstly, four hundreds of samples collected around the world were analyzed using a standard method and Retention time locking technology (RTL) was applied to reduce the change of retention time of GC/MS spectrum. Secondly, the automatic identification, integration of n-alkanes, biomarker compounds, polycyclic aromatic hydrocarbons and calculation of the diagnostic ratios were realized by MATLAB software. Finally, a database of oil fingerprints were established and applied successfully in a spill oil accident. Based on the new method and database, we could acquire the diagnostic ratios of an oil sample and find out the suspected oil within a few minutes. This method and database can improve the efficiency in spilled oil identification.     

结合POI数据的道路自动选取方法

人们对道路重要性的认知与道路周边设施有重要关系,针对现有地图综合道路选取方法中对语义特征考虑不足的问题,将POI数据引入到道路的语义特征分析中,提出一种综合考虑道路空间特征和语义特征的道路综合自动选取方法。首先,结合POI位置数据构造了道路语义特征度量的3个新参量：设施点密度、重要设施比率和专题设施比率;然后,与道路长度、连接值、总深度值、平均线密度等反映道路几何、拓扑和分布特征的度量参量一起,通过归一化和熵值法赋权进行整合计算,得到道路重要性值;最后,综合考虑道路重要性值、道路stroke构成和stroke连通度的约束条件进行道路的分步选取。实验结果表明,该方法在保留主要道路、保持道路分布疏密特征和道路连通性的同时,较好地顾及了道路的语义特征信息。     

基于“葵花8号”气象卫星的陇东南地区强对流识别跟踪技术研究

利用常规观测资料、区域自动站资料和“葵花8号”气象卫星资料,对2016年4—9月甘肃省陇东南地区出现的43次强对流天气过程进行分析,确立了强对流云团识别指标、追踪方法及预报指标,并对2018年部分个例进行效果检验。结果表明：（1）利用卫星B13通道（10.4μm）亮温值TBB≤238 K或B08通道（6.2μm）与B13通道亮温差△TBB<0 K双阈值作为强对流云团识别指标,可以准确识别出陇东南地区的强对流天气云团;（2）利用“逆向搜索法”、“面积重叠法”及对云团重心的计算,可以对强对流云团进行准确定位、追踪及移动路径外推预报;（3）建立的强对流天气落区判别指标对该地区短时强降水及冰雹落区具有一定的预报能力。     

A comparison of fibre‐optic distributed temperature sensing to traditional methods of evaluating groundwater inflow to streams

There are several methods for determining the spatial distribution and magnitude of groundwater inputs to streams. We compared the results of conventional methods [dye dilution gauging, acoustic Doppler velocimeter (ADV) differential gauging, and geochemical end‐member mixing] to distributed temperature sensing (DTS) using a fibre‐optic cable installed along 900 m of Ninemile Creek in Syracuse, New York, USA, during low‐flow conditions (discharge of 1·4 m³ s^?1). With the exception of differential gauging, all methods identified a focused, contaminated groundwater inflow and produced similar groundwater discharge estimates for that point, with a mean of 66·8 l s^?1 between all methods although the precision of these estimates varied. ADV discharge measurement accuracy was reduced by non‐ideal conditions and failed to identify, much less quantify, the modest groundwater input, which was only 5% of total stream flow. These results indicate ambient tracers, such as heat and geochemical mixing, can yield spatially and quantitatively refined estimates of relatively modest groundwater inflow even in large rivers. DTS heat tracing, in particular, provided the finest spatial characterization of groundwater inflow, and may be more universally applicable than geochemical methods, for which a distinct and consistent groundwater end member may be more difficult to identify. Copyright © 2011 John Wiley & Sons, Ltd.     

Explicit integration of bounding surface model for the analysis of earthquake soil liquefaction

This paper presents a new plasticity model developed for the simulation of monotonic and cyclic loading of non‐cohesive soils and its implementation to the commercial finite‐difference code FLAC, using its User‐Defined‐Model (UDM) capability. The new model incorporates the framework of Critical State Soil Mechanics, while it relies upon bounding surface plasticity with a vanished elastic region to simulate the non‐linear soil response. Stress integration of constitutive relations is performed using a recently proposed explicit scheme with automatic error control and substepping, which so far has been employed in the literature only for constitutive models aiming at monotonic loading. The overall accuracy of this scheme is evaluated at element level by simulating cyclic loading along complex stress paths and by using iso‐error maps for paths involving change of the Lode angle. The performance of the new constitutive model and its stress integration scheme in complex boundary value problems involving earthquake‐induced liquefaction is evaluated, in terms of accuracy and computational cost, via a number of parametric analyses inspired by the successful simulation of the VELACS centrifuge Model Test No. 2 studying the lateral spreading response of a liquefied sand layer. Copyright © 2009 John Wiley & Sons, Ltd.     

皖江中东部雾的客观预报自动化业务系统

介绍了一种雾的客观预报方法，并研制了一个与ＳＴＹＳ接口的雾的客观预报自动化业务系统，对雾有一定的预报能力。     

探地雷达图像的正演合成与偏移处理

本文讨论了射线追踪法实现二维地电断面的探地雷达图像的正演合成问题,其中包括二维地电断面的数字拟合、多层连续界面介质中高频电磁波的反射与透射统一的运动学边界方程;根据Huygen's-Fresnel原理导出了均匀介质中二维管状体模型的衍射雷达波的计算公式;给出了用射线追踪法合成的二维地电模型的探地雷达图像;用衍射波公式合成了二维管状模型的雷达图像,并与物理模拟作了比较.在此基础上,用Kirchhoff积分法对数字模拟与物理模拟记录的雷达图像作了偏移处理,并给出了实例.     

地形图等高线成组综合的试验

本文在讨论制图自动综合一般问题的基础上,着重分析了两种等高线自动综合的技术路线存在的优缺点。笔者提出,采用模拟人类专家智能的方法,从二维的等高线输入数据出发,提取地貌结构信息,从而对等高线进行成组的综合,直接形成经综合的二维等高线输出数据,有可能获得较为简捷,效果良好的综合结果。在对这条技术路线进行实验的过程中所涉及的人工智能问题,主要包括:对无序数字化等高线数据的整理、等高线上重要特征点的识别、正负向地貌特征的确定、谷地点的选出、谷底线的自动跟踪、谷地重要性的计算、谷间距的自动量算、对称谷地的寻找、综合后图形的生成等。