Modeling,ray tracing,and block nonlinear travel-time inversion in 3D

We describe an integrated forward and inverse three-dimensional modeling system that can deal with complex geological structures. The system has been designed to handle large-scale problems by using a distributed approach. It uses seismic ray tracing for forward simulation, time-to-depth mapping, and nonlinear travel-time inversion.A novel decomposition method is our tool to attack large-scale problems in a parallel approach. The system is fully implemented and we demonstrate its performance with synthetic examples.This research was partially supported by the National Science Foundation under SBIR Grant III-9300992.     

GNSS在变形监测中的应用研究

随着GNSS技术的快速发展以及变形监测的需求日益增加,GNSS在变形监测中的应用越来越广泛,更新了变形监测手段,弥补了单一系统的不足,提高了监测效率与精度,为变形体的稳定性监测与安全运营提供了保障。本文探讨了GNSS的变形监测方案及数据处理方式,并结合盐水沟隧道工程的实例详细说明了GNSS在变形监测中的应用,最终通过实例验证GNSS能满足变形监测的精度等要求。     

低空急流识别及急流轴自动绘制方法研究

低空急流对强对流天气的预报有重要意义。针对目前低空急流主要由手工绘制,存在效率低、易受主观因素影响的问题,本文基于MICAPS高空全要素填图数据中的探空站风场信息,提出了一种低空急流自动识别及急流轴自动绘制算法。算法从急流轴定义出发,依次从风速、风向、探空站分布、中轴线位置等多个角度对低空急流轴进行检测。经过传递闭包聚类、急流轴关键点提取、不同风向急流轴关键点归并、急流轴平滑等步骤,实现了低空急流自动识别及急流轴的自动绘制。测试表明,在识别的基础上自动绘制的急流轴具有位置准确、形态自然、能完整反映急流水汽输送路径、适应复杂环境低空急流等特点。在291组测试数据中未发现空报,准确击中率达到94.96%。     

一种底座式ADCP流量自动监测探头支撑装置的研制与应用

在流量自动监测系统中,底座式ADCP设备探头位于河底,维修极为不便。该研制装置采用304不锈钢支架配合滑轮、钢索、绞盘等手摇传动系统,将底座式ADCP设备探头从河底传送到水上岸边检修台,实现对设备探头的维护、检修、更换、安装、调试等操作,再通过该装置将底座式ADCP设备探头传送到河底原位,经十里长街等站实际应用,运行稳定可靠,运用极为方便;该装置防磁、防锈、防腐性能良好,为底座式ADCP探头提供一个很好的工作环境,且结构简单,运输方便,可作为中小河流永久流量自动监测站装置使用。     

利用重复地震P波走时差观测地壳介质的微动态

基于研究区域地震震相到时资料及地震波数据,给出了两个局部地区地壳介质微动态变化的实例。一个是汶川8.0级地震起始破裂区域,即A区;另一个是三岔口地区,即B区,该区域为活动断裂交汇部位,未发生过大地震,但近年来中小地震频繁。分析A区后发现,在汶川8.0级地震前,部分台站观测的地壳介质微动态出现了中短期异常,震源区正东及北东方向波速升高,反映出地壳介质受到显著挤压而处于硬化阶段;震源区西南方向的波速则比较稳定。分析B区后发现,可能受到汶川8.0级地震的影响,部分台站给出的计算结果在地震前后发生了变化,显示出不同方位地壳介质承压状态的差异。     

地质剖面图中复杂断层的自动生成方法

为实现地质剖面图中复杂断层的自动生成,通过分析断层数据类型,实现断层数据规范化处理;分析断层自身的基本要素(断点、断距、性质、走向、倾向、与地层的切割、错动关系等),提出采用“复原法”构建单一断层模型的方法;依据复杂断层的空间拓扑关系及其重要性,划分断层级别,理顺断层之间、断层与地层之间的关系,探索出地质剖面图中复杂断层的自动生成方法。通过开滦某煤矿的地质数据验证了该方法的有效性。该方法可依据用户需要,生成任意方向的地质剖面数据,为基于剖面的三维建模提供了充足的原始建模数据。     

长江流域沿江镉异常示踪与追源的战略与战术

正在进行的多目标地球化学调查成果显示,长江流域存在全流域的Cd异常。长江流域Cd异常示踪与追源研究的长期目标是查明长江流域沿江各主要支流(汇水面积大于5000km2)Cd等重金属元素的物质来源、迁移形式和输入/输出通量、分辨自然源与人为源各自所占份额,建立沿江各支流Cd时空演化模型,监测它的未来发展趋势,对潜在生态效应进行预警预测;短期目标是针对Cd异常的重点地区,如长江源头、三峡库区、湘江流域、江淮流域、长江三角洲及流域内的4大淡水湖泊,查明Cd异常的来源,重建Cd异常形成的地球化学记录,评估可预见的将来(如10～50年)Cd异常的生态效应。     

An automated salt‐tracing gauge for flow‐velocity measurement

This article introduces the SVG (salt‐velocity gauge), a novel automated technique for measuring flow velocity by means of salt tracing. SVG allows a high measuring rate (up to one every 2 seconds), short control section length (down to 10 cm), high accuracy (+[sol ]?1·5 cm s^?1), and unbiased calculation of the mean velocity in experimental conditions with turbulent, supercritical flow. A few cubic centimetres of saturated salt solution (NaCl) are injected into the flow at regular time intervals using a programmable solenoid valve. The tracer successively passes two conductivity probes placed a short distance downstream. The transformation of the signal between the two probes is modelled as a one‐dimensional diffusion wave equation. Model calibration gives an estimation of the mean velocity and the diffusion for each salt plume. Two implementations of the SVG technique are described. The first was an outdoors simulated rainfall experiment in Senegal (conductivity probes at 40 cm apart, 8 Hz measurement rate, salt injections at 10 second intervals). Mean velocity was estimated to range between 0·1 and 0·3 m s^?1. The second was a laboratory‐based flume experiment (conductivity probes at 10 cm apart, 32 Hz, salt injections at 2 second intervals). Another SVG with probes at 34 cm apart was used for comparison. An acoustic Doppler velocimeter (ADV) was also used to give an independent assessment of velocity. Using the 10 cm salt gauge, estimated mean velocity ranged from 0·6 to 0·9 m s^?1 with a standard deviation of 1·5 cm s^?1. Comparisons between ADV, 10 cm SVG and 34 cm SVG were consistent and demonstrated that the salt‐tracing results were unbiased and independent of distance between probes. Most peaks were modelled with r² > 90 per cent. The SVG technology offers an alternative to the dye‐tracing technique, which has been severely criticized in the literature because of the wide interval of recommended values for the correction factor α to be applied to the timings. This article demonstrates that a fixed value of α is inappropriate, since the correction factor varies with velocity, diffusion and the length of the control section. Copyright © 2005 John Wiley & Sons, Ltd.     

无射线追踪层析静校正技术及其应用研究

静校正技术在近地表条件复杂地区的地震资料处理中具有重要意义,其校正的准确性直接影响后续的处理和解释工作。在众多静校正方法中,无射线追踪层析静校正法兼具稳定性和灵活性的优点。这里对无射线追踪层析静校正的原理和主要参数进行了分析;而后将其应用于鄂尔多斯盆地某工区黄土塬地区地震资料的处理,把处理效果与其他几种不同静校正方法进行了对比。结果表明,该方法可使单炮记录和叠加剖面的质量得到较大改善,地震记录同相轴的连续性得到增强。     

几种静校正方法的比较研究

为解决近地表速度异常和地形起伏引起的静校正问题,已出现了多种静校正方法,这常常使资料处理人员无所适从。这里从众多的静校正方法中选择了三个具有代表性的,在生产中用得较多的方法(折射静校正、无射线追踪层析静校正、非线性层析静校正),从方法原理、方法特点、实际应用效果等方面进行了比较研究,最后给出了针对不同目标选择适当静校正方法的建议,以帮助资料处理人员在实际资料处理中,有针对性地选择静校正方法,快速有效地完成资料处理任务,提高处理质量。