河南省金属矿产资源现状及勘查战略探讨

本文在全面论述河南省金属矿产资源特点,90年代以来金属矿产勘查开发的主要成果及存在问题,以及在主要金属矿产勘查开发前景的基础上,提出了找矿勘查四大战略:即在项目安排上,要以市场对矿产品和矿权地的需求为立项的主要依据;在矿种选择上,要重点勘查金、银,注意找寻铜、铅锌,择优勘查富钼、富铝,有条件地探索富铁、富锰;在勘查选区上,要以老区扩展为主,新区开拓为辅;在技术方法上,要大力研究和应用找矿新理论、新技术、新方法,力求深部找矿有重要突破。     

积极探索建立适应社会主义市场经济的地质矿产资源管理新体制

文章从适应社会主义市场经济要求出发,根据我国建立社会主义市场经济体制的理论和成功经验,论述了矿产资源管理方式转变的总体思路、要求、矿产资源管理新体制的构架和运行机制,论述了地方地矿行政管理的职能。     

西安地热田医疗热矿水的产出状况分析

本文介绍了西安地热田概况及开采现状, 重点讨论了西安地热田医疗热矿水的产出状况     

中国地球物理学研究面临的机遇、发展空间和时代的挑战

在21世纪的今天,中国正处于快速工业化、经济腾飞和科学技术突飞猛进的进程中,地球物理学面临巨大的机遇,展现出多维的发展空间,同时也面临着严峻的挑战.为此,国家战略需求和自主创新已成为中华民族能否独立于世界民族之林的最强音！在这前提下,地球物理学家就必须超越已有的框架,穿过地平线,全方位的研究、探索、揭示、发现地球内部的奥秘.必须清晰地认识到新世纪里地球物理学的发展导向,即地球物理学的前沿领域和深化研究与现代科学技术进步的制约;地球物理学必须牢牢地把握住向高层次的综合研究脉络方能有所发现与突破;地球物理学所面临的机遇、多元发展空间和挑战;地球内部圈层结构与大陆动力学研究的主体内涵和导向.     

东帝汶海MD98-2172岩芯磁记录与还原成岩作用过程

MD98-2172岩芯位于印度尼西亚穿越流的帝汶通道上.多参数的岩石磁学测量结果表明,该岩芯的磁性矿物组合很好地记录了海洋沉积物中的还原成岩作用过程:0～3.85 m段岩芯以亚铁磁性准单畴(PSD)磁铁矿为主,其含量和粒度基本不随深度而变,受还原成岩作用的影响不明显;3.85～5.35 m段岩芯也以PSD磁铁矿为主,但其含量随深度的增加而快速减少,粒度随深度的增加而变粗,或粗粒磁铁矿的相对含量随深度的增加而增多,处于铁氧化物还原阶段;5.35～15.00 m层段以顺磁性颗粒为主,并出现黄铁矿,处于硫酸盐还原阶段.     

土壤剖面的磁学特征及其对交通污染的指示意义——以北京首都机场高速公路为例

对北京首都机场高速公路旁采集的土壤柱状T01剖面的磁学参数和金属元素分析,探讨了研究区内现代交通导致的土壤磁学性质的变化及其对环境污染的响应.结果表明,磁参数(χ,ARM和SIRM)与重金属含量呈同步垂向变化趋势.来源于交通运输排放的污染物是土壤剖面上部(0～8 cm)磁性和金属含量增强的主要原因,8cm以下,土壤基本未受到污染,磁性矿物和重金属含量较低,磁性颗粒变化稳定,基本代表了该地区土壤的自然背景.尽管土壤岩石磁学分析表明剖面上下部受污染和未受污染样品的磁载体均是粒度较粗的多畴磁铁矿,但是结合磁参数比值曲线,说明底部样品的磁颗粒的粒度较顶部偏细.磁性矿物的含量变化没有影响磁颗粒的粒度特征.指标聚类等相关分析表明,土壤磁参数(χ,ARM和SIRM)与重金属元素(Pb,Zn和Cu)含量显著相关;结合模糊聚类分析,磁参数可用于追踪、识别交通污染物质在土壤剖面中的富集、迁移状态,揭示不同深度土壤的污染程度.     

Revised activity–composition models for clinopyroxene and amphibole

Recent activity–composition models for clinopyroxene and amphibole are revised to provide better consistency with observed phase relations in natural rocks. For clinopyroxene, the calibration in NCFMAS is retained, but the incorporation of acmite is revised to improve the partitioning of ferric iron between coexisting clinopyroxenes. For amphibole, the NCFMASH calibration is retained, but the addition of ferric iron is changed to provide consistency with the clinopyroxenes. The thermodynamics of orthoamphibole (gedrite) is also adjusted to resolve an unrelated inconsistency. The effects of these improvements are illustrated through comparison of calculated pseudosections produced with the existing and new models with natural data from lawsonite eclogites.     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.     

西藏羊八井地热田水热蚀变

本文对羊八井地热田钻扎ZK-201、ZK-301和ZK-308的岩心进行了较系统的蚀变矿物学、岩石学和流体包体研究。划分出6个蚀变矿物共生组合及蚀变分带,讨论了蚀变过程中岩石化学变化的特点,并推测了蚀变的温度和酸碱度条件。研究表明,热田曾处于极度的活动状态,最高温度达220-240℃,由于冷水的入侵,热田在目前钻探所及范围已冷却了50-70℃。蚀变矿物分布模式表明,目前热田流体主通道位于北部,热田进一步的开发应以寻找北部深部高温流体为主。     

青海湖沉积物中的粘土矿物

本文对青海湖沉积物中的粘土矿物和沉积环境进行了初步研究。沉积物的粒度成分一般以粉砂级为主,湖周沉积物较粗,湖内沉积物较细。湖中粘土矿物以伊利石-绿泥石为主,含少量蒙脱石和高岭石等。沉积物表层未见蒙脱石,粘土中Al₂O₃、K₂O和MgO的相对百分含量的特征与海粘土的化学成分特征相似。