Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

Fractional crystallization models and B–Be–Li systematics at Mt Somma-Vesuvius volcano (Southern Italy)

A compilation of B–Be–Li data on rocks that cover the entire eruptive history of Somma-Vesuvius is presented and interpreted in the light of evolution models for the Somma-Vesuvius rocks. Using major and trace element data, fractional crystalllization models are presented for different geochemical units. These data were used to constrain the source mineralogy of the Somma-Vesuvius rocks (ol-opx-cpx-gar-amp of 0.4-0.3-0.1-0.1-0.1), the amount of sediment added (5–10%) and the melt fraction from batch partial melting computations (0.05–0.1). From the B–Li data it is inferred that the main process responsible for the B isotopic signature is sediment recycling. However, the B–Li data show a major variation in Li abundances respect to B which is explained with Li dehydration before the fluid enriched the mantle wedge that produced the arc magmas. The Somma-Vesuvius B isotope composition is intermediate between that of the Campi Flegrei and the broad field of the Eolian Island arc. A low Be isotopes in the recent volcanic rocks can be explained as: (a) the top 1–22 m of the incoming sediment is accreted, (b) large amounts of sediment erosion, (c) a slow rate of subduction which have provoked a long magmatic history for the Vesuvius magma, (d) the sediment component takes several Myr longer than the subducting plate to reach the magma source region beneath Italy.     

广州航空邮件处理中心土洞及桩端软土层处理工艺研究

广州航空邮件处理中心位于岩溶发育地区,场区内存在大量土洞、溶洞等不良地质现象。该建筑物拟采用静压桩基础。为保证建筑物及场道安全,须对场区土洞进行处理。结合场地具体情况和施工工期要求,首先对大体积土洞进行泵注细石砼骨料充填处理,以消除地面大面积塌陷的危险,消灭压桩机械施工安全隐患,然后开始进行静压桩基础施工,同时在场地允许区域对中小体积土洞、桩端软土层等分别进行泵注砂浆骨料和袖阀注浆处理．以确保洞体密实和保证桩基承载力。通过对处理工艺、处理范围的比较筛选和对质量控制要点、施工技术要点的分析提炼．达到了施工简便、造价合理、安全高效的目的,并采用骨料取芯检测、土体标贯试验和压缩试验、洞体物探等多种检测手段,完全达到了设计要求,取得了良好的工程效果和经济效益。     

A dynamic box model of bioactive elements in the southern Taiwan Strait

A dynamic box model was applied to study the characteristics of biogeochemical cycling of PO_4-P,NO_3-N,AOU,POC and PON in the southern Taiwan Strait region based on field data of the"Minnan Taiwan Bank Fishing Ground Upwelling Ecosystem Study" during the period of Dec.1987-Nov.1988.According to the unique hydrological and topographical features of the region,six boxesand three layers were considered in the model.The variation rates and fluxes of elements induced by hor-izontal current,upwelling,by diffusion,sinking of particles and biogeochemical processes were estimatedrespectively.Results further confirmed that upwellings had important effects in this region.Thenearshore upwelling areas had net input fluxes of nutrients brought by upwelling water,also had high de-pletion rates of nutrients and production rates of particulate organic matter and dissolved oxygen.Theabnormal net production of nutrients in the middle layer(10-30m) indicated the important role of bacte-ria in this high production region.Th     

“Tripoli”的含义及译名的讨论

“Tripoli”是一种新型的石英质工业矿物原料,在我国长期被误译为硅藻土,影响地质部门对这一新矿种的认识和寻找。本文追溯了“Tripoli”一名的由来,正确地阐述了“Tripoli”的本质特征,分析了在国内文献中长期被误译的根源,指明了其正确含义,并建议废除各种不正确的中译名,译为“粉石英”。     

Effects of low molecular weight organic acids on sorption and desorption behavior of p-chlorophenol by yellow earth

Low molecular weight organic acids （LMWOAs） are important components of root exudates. They play an important role in immobilizing and remobilizing contaminants in rhizospheric soil. Effects of four LMWOAs on the sorption and desorption behavior of p-chlorophenol by yellow earth was studied in batch mode. The results showed that the previous application of LMWOAs to enhanced adsorption capacity of p-chlorophenol of the soil in the order of maleic acid〉malic acid〉oxalic acid〉citric acid. However, when LMWOAs were applied to soil where p-chlorophenol had been previously adsorbed, substantial p-chlorophenol was desorbed from soil by oxalic acid, whereas citric acid, malic acid and maleic acid didn＇t desorb as much p-chlorophenol from soil as deionized water.     

GGR Critical Review of Analytical Developments in 2004–2005

In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields.     

Reference Materials in Geoanalytical Research -Review for 2004 and 2005

This review gives an overview of the use and development of reference materials of geochemical and environmental interest in the literature of the years 2004 and 2005. In these years the performance of existing methods has been improved and new geochemical applications using new techniques have been developed. Accordingly, there was an increasing need for new reference materials, especially for in situ microanalysis and for precise stable isotope measurements. In addition, there was a notable trend for further characterisation of existing reference materials, mainly for the platinum-group elements. This review focuses on five topics: reference materials for platinum-group elements, reference glasses for in situ microanalysis, zircon reference materials, isotopic reference materials, and the development and certification of reference materials.     

The distribution of radiogenic heat production as a function of depth in the Sierra Nevada Batholith, California

Geochemical analyses and geobarometric determinations have been combined to create a depth vs. radiogenic heat production database for the Sierra Nevada batholith, California. This database shows that mean heat production values first increase, then decrease, with increasing depth. Heat production is 2 μW/m³ within the 3-km-thick volcanic pile at the top of the batholith, below which it increases to an average value of 3.5 μW/m³ at 5.5 km depth, then decreases to 0.5–1 μW/m³ at 15 km depth and remains at these values through the entire crust below 15 km. Below the crust, from depths of 40–125 km, the batholith's root and mantle wedge that coevolved beneath the batholith appears to have an average radiogenic heat production rate of 0.14 μW/m³. This is higher than the rates from most published xenolith studies, but reasonable given the presence of crustal components in the arc root assemblages. The pattern of radiogenic heat production interpreted from the depth vs. heat production database is not consistent with the downward-decreasing exponential distribution predicted from modeling of surface heat flow data. The interpreted distribution predicts a reasonable range of geothermal gradients and shows that essentially all of the present day surface heat flow from the Sierra Nevada could be generated within the 35 km thick crust. This requires a very low heat flux from the mantle, which is consistent with a model of cessation of Sierran magmatism during Laramide flat-slab subduction, followed by conductive cooling of the upper mantle for 70 m.y. The heat production variation with depth is principally due to large variations in uranium and thorium concentration; potassium is less variable in concentration within the Sierran crust, and produces relatively little of the heat in high heat production rocks. Because silica content is relatively constant through the upper 30 km of the Sierran batholith, while U, Th, and K concentrations are highly variable, radiogenic heat production does not vary directly with silica content.