Assessment of Workers’ Contamination Caused by Air Pollution Exposure in Industry Using Biomonitors

The workers health service is guided to look for risks. There is not an evaluation of the onset of the disease linked to a long-term exposure to low levels of toxic agents. Besides, there are few records of the level of metal concentration in the environmental air in industry, as well as few records of the level of contamination of factory workers. To assess the level of pollution in workplace, galvanising industry was chosen as the object of this study. The worker exposure and contamination levels were assessed by means of airborne particulate matter collected in air filters and biomonitors. The analysis of the air filter, hair and toenail samples were carried out by Instrumental Neutron Activation Analysis, and urine samples by Graphite Furnace Atomic Absorption Spectrophotometry. The statistical multivariate analysis and ANOVA methods were applied to elemental concentration. Copper and iron elements were highlighted as the main contributors on the differentiation of the classes. The results point out the effectiveness of biomonitors in occupational studies.     

Arsenic Speciation in Lichens and in Coarse and Fine Airborne Particulate Matter by HPLC–UV–HG–AFS

A three-step sequential extraction procedure with Milli-Q, CaCl₂ and H₃PO₄ was applied for extraction of arsenic species in lichen transplants and airborne particulate matter (fine and coarse fractions). The samples used in this work were collected in 1994–1995 near coal-fired power plants. Both transplant lichens and airborne particulate matter were submitted to the same environment simultaneously. Arsenic species identification and quantification was performed by HPLC–UV–HG–AFS. Inorganic forms of arsenic (arsenite and arsenate) were present in significant amounts in most of the samples. Only in lichens also organic forms of arsenic (monomethyl arsonic acid and dimethyl arsinic acid) were identified which may indicate biotransformation of inorganic arsenic.     

Nature and origin of arsenic carriers in shallow aquifer sediments of Bengal Delta,India

Sediments from shallow aquifers in Bengal Delta, India have been found to contain arsenic. Rivers of Ganga-Brahmaputra system, responsible for depositing these sediments in the delta, have created a store of arsenic. Geomorphological domains with different depositional styles regulate the pattern of distribution of zones with widely different content of groundwater arsenic. The high arsenic zones occur as narrow sinuous strips confined to channel deposits. A few iron-bearing clastic minerals and two post-depositional secondary products are arsenic carriers. Secondary siderite concretions have grown on the surface of the clastic carriers in variable intensity. The quantity of arsenic in all clastic carriers is in excess of what is generally expected. Excess arsenic is contributed by the element adsorbed on the concretion grown on the surface of the carriers, which adds up to the arsenic in the structure of the minerals. Variable abundance of concretions is responsible for the variable quantity of arsenic in the carriers and the sediment samples. Fe²⁺ for the growth of siderite concretions is obtained from the iron-bearing clastic carriers. The reaction involves reduction of trivalent iron to bivalent and the required electron is obtained by transformation of As³⁺ to As⁵⁺. It is suggested that oxidation of As³⁺ to As⁵⁺ is microbially mediated. In the Safe zone arsenic is retained in the carriers and groundwater arsenic is maintained below 0.05 mg/l. In the Unsafe zone sorbed arsenic is released from the carriers in the water through desorption and dissolution of concretion, thereby elevating the groundwater arsenic level to above 0.05 mg/l.     

Variations in stratigraphic and reservoir properties adjacent to the Mid-Paleocene sequence boundary, Campo section, Pyrenees, Spain

The Paleocene of the Campo section, Spain has different sedimentological characteristics above and below the Mid-Paleocene Unconformity. Beneath the unconformity sediments are dominated by evaporitic carbonates and collapse breccias. Above it they are characterized by continental detrital beds alternating with paleosols. Different subaerial features are observed and correspond to different porosity values, pore–throat sizes and micrite morphologies. Unexposed or intertidal facies have low porosity, low throat–pore size (mesoporosity) and well preserved rhombic crystals. Intermediate exposed facies (paleosols) possess medium porosity, medium pore–throat size (microporosity) and mainly micro-rhombic crystals. Finally, the facies corresponding to high exposure intensity and to evaporitic original facies presents high porosity, permeability, large pore–throat size and rounded micritic crystals. These observations show that the emersion phase caused important dissolution, especially when associated with an easily dissolved original lithofacies.     

黔西南部分矿集区环境背景

黔西南是金、锑、汞、砷、煤矿集中分布区,汞、砷在土壤中背景值高于一般土壤的20倍,汞高出14～5000倍,属于高砷、汞、氟环境背景区,由于矿业活动不合理,加剧了区内土壤、水体污染,存在砷、汞、氟等环境污染隐患。     

继承性宇生核素对暴露测年结果影响的定量分析方法探讨

宇生核素暴露测年过程中,通常假设在样品最后一次暴露前,样品中的宇生核素（继承性宇生核素）浓度为0。然而,大量的测年数据研究发现,样品的暴露年代结果会受到继承性核素的影响从而高估地貌的真实年代。因此,如何降低继承性核素对暴露年代结果的影响或者定量分析继承性核素的影响程度不仅可为地貌演化提供准确的年代数据,而且对宇生核素暴露测年技术的研究具有重要意义。因此,本文以宇生核素暴露测年技术在冰川地貌中应用为例,通过分析继承性核素的研究概况,并结合宇生核素暴露测年原理,探讨继承性核素对测年结果影响的定量分析方法。研究结果表明： ① 通过样品中 n ( 26 Al)/ n ( 10 Be) 值\[即同一样品中宇生核素Al 26 与Be 10 浓度（单位为atom/g）的比值\]以及同一地貌位置多个的样品年代数据分布情况可初步判断测年结果是否受到继承性核素的影响;② 通过现代冰川冰碛物中宇生核素的浓度可以定量分析继承性核素对暴露测年结果的影响; ③ 通过计算冰碛垄顶部和一定深度（＞2~3 m）样品的宇生核素浓度差,可以减少继承性核素的影响。本研究内容对冰川地貌宇生核素暴露测年具有重要意义。     

Late Holocene environmental changes and anthropogenic impact in Dee Why Lagoon,New South Wales

Late Holocene environmental changes were examined in Dee Why Lagoon, New South Wales, based on the sedimentological, geochemical and geochronological analysis of six cores collected from the fluvial delta and lagoon basin. The lagoon formed about 7300–7200?cal yr BP, following the post-glacial marine transgression and establishment of a sand barrier. Infilling of the lagoon occurred at a rate of 0.09–0.15?mm/yr until about 3300–3200?cal yr BP, when the barrier closed, resulting in mostly freshwater conditions, as evidenced by a change from pyrite-rich units to sediment containing little sulfur and a lack of foraminifera. Sedimentation rates increased to 0.23 then 0.43?mm/yr until about 100?years ago. Post-European land clearance led to an increase in sedimentation rates to 1.0–1.3?mm/yr on the fluvial delta, which are lower than those from other wave-dominated estuaries in New South Wales as well as those estimated by previous studies in Dee Why Lagoon. Our study shows that the fluvial delta started forming much earlier than originally thought, based on results of radiometric dating, and confirmed using sedimentological and geochemical data, as well as a critical examination of historic aerial photographs. Human impact has resulted in an increase in heavy metal (Cu, Pb, Zn) and metalloid (As) concentrations in the recent sediment, most likely attributed to stormwater discharge. Pb and As concentrations are above the ANZECC high sediment quality guideline values at the site closest to the stormwater outlet, with As-based pesticides one of the possible sources. Using the mean enrichment quotient, which is based on normalised Cu, Pb and Zn concentrations over their normalised background concentrations, we show that the surface sediments in Dee Why Lagoon are severely enriched, reflecting the recent anthropogenic impact that has also led to an increase in sedimentation rates.     

Effect of pedogenesis on the stable isotopic composition of calcretes and n‐alkanes: Implications for palaeoenvironmental reconstruction

In a fluvial system, depending on sub‐aerial exposure, non‐pedogenic pond calcretes can be modified into pedogenic calcretes. The present study attempts to understand the effect of sub‐aerial exposure and pedogenesis on calcretes using carbon and oxygen isotopic composition. For this purpose, two profiles (profile‐A and profile‐B) from the same stratigraphic level in Rayka from the western part of India were selected. The profiles are separated by a distance of 500 m and showed differences in calcrete characteristics. In profile‐A, the calcretes showed pedogenic features (root traces and void filling spar) whereas calcretes in profile‐B showed non‐pedogenic characteristics (fine laminations). However, some of the calcretes in profile‐A exhibited remnants of fine laminations suggesting that initially the calcretes had a non‐pedogenic origin but were modified due to pedogenesis. In profile‐A, the carbon and oxygen isotope values of pedogenic calcrete (δ¹³C_PC and δ¹⁸O_PC) showed more variation compared with non‐pedogenic pond calcretes (δ¹³C_SPC and δ¹⁸O_SPC) in profile‐B. The δ¹³C_PC and δ¹³C_SPC values exhibited a spread of 3·0‰ and 1·3‰, respectively, and δ¹⁸O_PC and δ¹⁸O_SPC values showed a spread of 2·3‰ and 1·3‰, respectively. The differences in the isotopic composition between the two profiles suggest that pedogenesis controlled the isotopic inheritance in calcretes. In addition, the carbon isotopic composition of organic matter (δ¹³C_OM) and n‐alkanes (δ¹³C_n‐alk) that forms the basis of palaeovegetational reconstruction have also been measured to understand the effect of pedogenesis on organic matter in both of the profiles. The average δ¹³C_OM values in profile‐A and profile‐B are ?23·4‰ and ?21·1‰, respectively. The disparity in δ¹³C_OM values is a result of the difference in the sources and preservation of organic matter. However, the δ¹³C_n‐alk values show a similar trend in profile‐A and profile‐B, indicating that sources of n‐alkanes are the same in both of the profiles and δ¹³C_n‐alk values are unaffected by the pedogenic modifications.     

Hydraulics of overland flow influenced by litter incorporation under extreme rainfall

Water erosion on hillslopes is a worldwide environmental problem, which is a rainfall‐induced process, especially extreme rainfall. The great intensity of extreme rainfall strongly enhances the power of overland flow to detach soil and transport sediment. Plant litter is one of the most important constituents of ecosystems that often covers the soil surface and can be incorporated into topsoil. However, little attention has been paid to its effect on flow hydraulics owing to the veiled nature. This study aimed to examine the effects of incorporated litter on the hydraulic properties under extreme rainfall condition. To reach this goal, six litter rates of 0, 0.05, 0.10, 0.20, 0.35, and 0.50 kg m^?2 and four litter types collected from deciduous trees, coniferous trees, shrubs, and herbs were incorporated into topsoil. Then, simulated rainfall experiments were performed on five slope gradients (5°, 10°, 15°, 20°, and 25°) with an extreme rainfall intensity of 80 mm h^?1. The results showed that Froude number and flow velocity of the overland flow decreased, whereas flow resistance increased exponentially with litter incorporation rate. Litter type had an influence on flow hydraulics, which can mainly be attributed to the variations in surface coverage of the exposed litter and the litter morphology. Flow velocity and Darcy–Weisbach coefficient increased markedly with slope gradient. However, the variation of slope gradient did not modify the relationships between flow hydraulics and incorporated litter rate. The random roughness, resulting from heterogeneous erosion due to the uneven protection of surface exposed litter, increased linearly with litter incorporated rate. As rainfall proceeded, flow hydraulics varied with incorporated litter rate and slope gradient complicatedly due to the increases in flow rate and coverage of the exposed litter and the modification of soil surface roughness.