河南产宝石级高温高压合成钻石的谱学特征及电磁性研究

为快速鉴定高温高压(HPHT)合成钻石,前人已开展了系统的发光特征和谱学特征研究,但对比性分析较少,且对电学性质和磁学性质关注不多.本文结合常规宝石学观察、高精度谱学测试以及导电性和磁性测试,对49粒无色、黄色样品进行了深入研究和对比分析.结果表明:①铁、钴、镍等金属元素的触媒残余是HPHT合成钻石的磁性来源,测试样品...     

油气包裹体的显微红外光谱测试技术及应用

单一油气包裹体的成分一直是地质学家关注的焦点,它能为油气成藏研究提供最直接的证据。显微红外光谱技术可以测定单个油气包裹体的成分、分子结构和其中油气包裹体的成熟度。本文应用显微红外光谱技术、包裹体的鉴定和均一温度测定技术,分析了大庆探区海拉尔盆地乌27井、巴16井、希3井等样品的包裹体。研究表明,乌27井有过两期成藏,并以第二期为主;巴16井也有过两期主要成藏,且第二期具混源的特点;希3井只有一次主要成藏期。同时利用红外光谱的CH2/CH3值、Xinc、Xstd划分了三口井的油气成藏期次,结果与镜下鉴定结论相一致,并确定了其中油气包裹体的成熟度。本文还探讨了显微-红外光谱测试单一油气包裹体的发展方向。     

山东地区多台波速比研究

文中从多台计算波速比方法的原理入手,对不同公式计算的波速比差异进行了深入分析,认为在原理一致的条件下,波速比差异主要与拟合过程中自变量的选取及2组数据的相关系数有关。利用2002年1月至2005年7月山东省境内及江苏省北部共52个数字及模拟台站的地方震P波和S波到时资料,选取有4个以上记录台站的地震。整个研究区域的平均波速比为1.716,反映了这个地区的波速比相对于华北其他地区偏高。将研究区域划分为1°×2°的单元,并剔除距离震中过远的台站,以保证区域特征能得到反映。通过对比不同单元的平均波速比发现,34°~37°,115°~119°的平均波速比明显高于其他单元,而它们正好分布在郯庐断裂的两侧,应该与该地区上地壳的岩石性质及震源深度分布范围较宽导致的平均效应有关     

近区瞬变场的频率效应与大深度探测能力的研究

在时域中,磁源近区瞬变场的时间特性取决于场源所含低频谱的分数幂.对于磁感应强度Bz(t)∝∑iω3/2i,对于感应电势εz(t)∝∑iω5/2i.这表明,现有的瞬变电磁探测系统只适用于浅部勘查,对于大深度的勘查,需要研制超强能量且轻便化的场源(发送系统),同时完善超导磁强计(接收系统)的实用化.     

浅论赣北九瑞铜金矿集区的资源潜力

九瑞矿集区是长江中下游铜金成矿带的重要组成部分.数十年来,几代地质和矿山工作者为探明其矿产资源,作出了不懈的努力,取得了巨大成果.但近年来,随着勘探难度的加大,该区矿床勘查和研究处于"半停滞"状态.文章运用前人的科研资料,结合近期的工作成果,用"铜金矿集区"的概念和观点,阐述了矿集区的特征,总结了其控矿因素和成矿规律,分析了九瑞铜金矿集区的成矿系统和资源潜力.     

西部某水电站坝区采空区的工程效应研究

通过对西部某水电站的地质环境分析,揭示了采空区分布特征.对溢洪道进行数值模拟,研究采空区上覆岩层的影响范围,分析采空区对溢洪道的影响.最后综合分析采空区对水电站不同工程部位的危害,提出相应的处理措施.     

生物土壤结皮固沙理论与实践

生物土壤结皮是由土壤微生物、藻类、地衣和苔藓等孢子植物类群与土壤颗粒形成的有机复合体,在全球干旱区地表广泛分布,是干旱地表生物覆被层的主要构建者.生物土壤结皮是荒漠植物群落演替的先锋类群,能够提高荒漠地表的稳定性,固定碳和氮等营养元素,增加土壤肥力,并在保持土壤水分方面发挥重要作用,因此在干旱区受损地表的生态修复方面具...     

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.     

Nonlinear aspects of energy dissipation in wood-panel joints

The joints connecting vertical and horizontal elements are the "weak link" in structural systems assembled from wood panels. If they are too weak, local failures may occur, resulting in performance that is significantly below expectations. If they are too resistant, the joints may be unable to dissipate energy during vibrations, thus possibly initiating a fast progressive failure. This paper re-processes and re-elaborates the results of shaking table tests previously carried out by the author and other co-workers. The goal is to assess the feasibility of a joint which is able to dissipate energy during vibration, without degrading the connection performance.     

A new spatial coherence model and analytical coefficients for multi-support response spectrum combination

In this paper, a new spatial coherence model of seismic ground motions is proposed by a fi tting procedure. The analytical expressions of modal combination (correlation) coeffi cients of structural response are developed for multi-support seismic excitations. The coeffi cients from both the numerical integration and analytical solutions are compared to verify the accuracy of the solutions. It is shown that the analytical expressions of numerical modal combination coeffi cients are of high accuracy. The results of random responses of an example bridge show that the analytical modal combination coeff icients developed in this paper are accurate enough to meet the requirements needed in practice. In addition, the computational effi ciency of the analytical solutions of the modal combination coeff icients is demonstrated by the response computation of the example bridge. It is found that the time required for the structural response analysis by using the analytical modal combination coeffi cients is less than 1/20 of that using numerical integral methods.