高能偏振能量色散X射线荧光光谱仪应用现状和进展

对高能偏振能量色散X射线荧光光谱仪基本特点及其用于环境、生物、地质样品中痕量元素的分析和RoSH检测等领域的应用现状予以介绍,并对二次靶与滤光片在痕量元素分析中的应用作了探讨。     

激光拉曼光谱法分析多种显微组分荧光变化及其应用

利用激发488 nm激光的氩离子激光器作为RENISHAW inVia型激光拉曼光谱仪的光源,建立了多种显微组分荧光变化(FAMM)分析方法,并对镜质体反射率明显抑制的东营凹陷有效烃源岩进行了测定。结果表明,东营凹陷有效烃源岩的有机质类型越好,镜质体反射率抑制程度越高,有效烃源岩的真实成熟度应主要处于0.64%~1.30%,而不是实测镜质体反射率所反映的0.37%~1.10%。     

山东省济宁强磁异常区深部铁矿初步验证及其意义

山东省济宁磁异常是一个重、磁同源体,面积大于100 km2,磁异常峰值为3800nT。钻探验证在孔深1041.57～1796.54m位置发现铁矿体,矿体总厚度74.04～220m,磁性铁平均品位15.89～25.19%。矿石类型有条带状方解磁铁石英岩和条带状磁铁石英大理岩,矿石的主要组成矿物为石英、方解石、磁铁矿、磁赤铁矿、菱铁矿。矿体产于济宁岩群浅变质岩系中,矿床特征与条带状铁建造（BIF）铁矿或鞍山式铁矿有明显区别,铁矿成因类型属与千枚岩、变质中酸性火山岩、大理岩有关的沉积变质型铁矿床。该区铁矿资源潜力巨大。     

Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

舟山国家石油储备基地堆载预压加固效果分析

介绍了舟山国家石油储备基地试验区软基堆载预压大型现场试验结果,根据现场试验测得的数据,分析了软土地基堆载预压下沉降变化规律、分层沉降变化规律、深层土体位移变化规律、超静孔隙水压力变化规律,进一步探讨了根据应力和应变分析得到的地基固结性状,其中通过应变分析得到适用于储备基地的沉降经验系数m。结果表明,打设塑料排水板结合堆载预压处理软弱地基具有良好的效果。     

饱和软黏土动力学特性循环扭剪试验研究

以饱和软黏土的循环扭剪试验研究为基础,阐明不固结不排水条件下饱和软黏土的动力学特性。在循环扭剪和循环三轴两种不同试验应力状态下,通过研究不同围压和不同静、动应力组合下饱和软黏土的应力等效破坏关系和应变等效破坏关系,提出在循环荷载作用下饱和软黏土的循环破坏同样遵循Mises屈服准则,且在Mises屈服准则下,饱和软黏土的循环强度趋于不变量。循环破坏的过程可以等效为一种拟静力弹塑性循环蠕变,建立了饱和软黏土循环累积变形随静荷载、循环荷载以及循环破坏振次之间的关系式。上述结论分别从应力和变形两个方面阐述饱和软黏土的动力学特性,与试验应力状态和围压无关,可以推广到一般应力状态下。     

岩石破坏前后曲线分类及脆-延转换围压研究——蚀变岩常规三轴压缩试验Ⅰ

蚀变岩是工程中少见的软弱岩类,在西南某重大水电工程中,蚀变岩处于工程的重要部位,为保证工程的长期稳定性,对蚀变岩力学特性进行了深入全面的试验研究.通过对孔隙度不同的饱水蚀变岩进行系统的常规三轴压缩试验和总结分析,提出了蚀变岩三轴压缩下破坏前应力.应变曲线可分为3大类,破坏后应力-应变曲线亦可分为3大类的形态模式.并得出结论:蚀变岩的破坏类型受围压与孔隙度的共同影响,在给定的12 MPa围压下蚀变岩以脆性破坏为主,只有孔隙度大于16%且围压大于4 MPa时才有可能进入脆-延转换状态,且脆-延转换围压随孔隙度增加而降低,临界状态应力比随孔隙度增大而增加.     

大黄鱼皮肤溃烂病病原的研究

从福建省厦门西海域某渔排养殖大黄鱼(Pseudosciaena cyogga)患皮肤溃烂病的肝脏、肌肉分离到2株优势菌。人工感染试验证实其中1株为致病菌。该菌的主要生理生化特性为革兰氏阴性，短杆状，极生单鞭毛，发酵葡萄糖，氧化酶阳性，赖氨酸脱羧酶、鸟氨酸脱羧酶阳性，精氨酸脱羧酶、水杨素、枸橼酸盐阴性，不产生H2S，利用葡萄糖、甘露醇产酸，对O／129(10μg)不敏感。在含0％，10％NaCl的普通培养基上不生长；在含2％，4％，6％，8％NaCl的普通培养基中生长；在温度30，35，40℃下生长良好，但4℃不生长。初步鉴定该病原菌为副溶血弧菌(Vibrio parahaemolyticus)。药敏试验表明，该菌对卡那霉素、复方新诺明、链霉素等10种药物敏感，对青霉素G、氨苄青霉素、利福平等6种药物不敏感。