台风“尤特”登陆后复杂路径的环境场特征

台风"尤特"(1311)2013年8月13—19日登陆减弱后直达桂东北并停留打转,其后又转向西南移动,"尤特"残涡在广西境内生存活动了112 h,造成了大范围强降雨。使用常规与非常规观测资料,研究了"尤特"登陆后的环境场与其长生命期及复杂移动路径的关系。结果发现:"尤特"登陆北上阶段主要受大尺度环境场的引导气流主导,后因引导气流转向减弱,与变压梯度力近似达到平衡导致停留打转;南下弱冷空气卷入与西南气流辐合形成负变压槽,负变压槽中风向气旋性切变产生正涡度效应向"尤特"残涡输送,与西南气流充沛的水汽输送共同作用使"尤特"残涡得以长时间维持。弱冷空气卷入使中尺度变压场中的正变压加强,在变压梯度力与引导气流共同作用下,"尤特"残涡沿负变压槽向西南移动。     

Latitudinal and Scan-dependent Biases of Microwave Humidity Sounder Measurements and Their Dependences on Cloud Ice Water Path

The relationship between differences in microwave humidity sounder(MHS)–channel biases which represent measured brightness temperatures and model-simulated brightness temperatures, and cloud ice water path(IWP) as well as the influence of the cloud liquid water path(LWP) on the relationship is examined. Seven years(2011–17) of NOAA-18 MHS-derived measured brightness temperatures and IWP/LWP data generated by the NOAA Comprehensive Large Array-data Stewardship System Microwave Surface and Precipitation Products System are used. The Community Radiative Transfer Model, version2.2.4, is used to simulate model-simulated brightness temperatures using European Center for Medium-Range Weather Forecasts reanalysis data as background fields. Scan-angle deviations of the MHS window channel biases range from-1.7 K to1.0 K. The relationships between channels 2, 4, and 5 biases and scan angle are symmetrical about the nadir. The latitudedependent deviations of MHS window channel biases are positive and range from 0–7 K. For MHS non-window channels,the latitudinal deviations between measured brightness temperatures and model-simulated brightness temperatures are larger when the detection height is higher. No systematic warm or cold deviations are found in the global spatial distribution of difference between measured brightness temperatures and model-simulated brightness temperatures over oceans after removing scan-angle and latitudinal deviations. The corrected biases of five different MHS channels decrease differently with respect to the increase in IWP. This decrease is stronger when LWP values are higher.     

基于图像处理的自动野外救援系统设计

针对野外救援的不及时性,结合人工智能等技术的应用,提出了一种新的自动野外救援系统.人类在野外和海上活动中受困后,除了依靠自身能力和装备进行求生之外,外部的有效及时救援是提高生存几率的关键.自动野外救援系统,由自动报警装置、手动报警装置实现报警,触发整个系统的运行.自动救援装置可以通过定位模块实现定位,通过执行器移动到随身装置附近实现救援,随身装置还可以发出信标导引信号;自动救援装置还可以通过传感器检测信标,通过相位检测技术等计算待救者的坐标并规划路径,实现更精准的定位与救援.     

气象因子对半冬性小麦灌浆速度的影响效应研究

选用黄淮海冬麦区4个半冬性小麦品种郯麦98、山农18、徐麦33、皖麦52为试验材料,通过分期播种试验,利用方差分析、相关分析、逐步回归和通径分析等方法,分析半冬性小麦籽粒灌浆速度变化趋势和气象因子对灌浆速度的影响。结果表明,正常播期冬小麦灌浆速度波动性最小、千粒重最大,迟播10 d冬小麦灌浆速度波动性最大、千粒重最小;华北区品种郯麦98灌浆速度表现最稳定、千粒重最高,而黄淮区品种皖麦52灌浆速度最大;半冬性小麦灌浆持续期为35～39 d;南北气候差异是影响各品种冬小麦灌浆速度不同的原因之一。半冬性小麦各播期灌浆速度的变化趋势一致,灌浆速度变化与相关显著气象因子的变化规律相符合;灌浆速度峰值期一般出现在开花后15～25 d,迟播冬小麦最大灌浆速度出现时间较对照处理提前,不利于提高粒重;气温条件对冬小麦灌浆速度影响显著,其中最高气温要素是影响不同播期品种灌浆速度的共有关键因子。通径分析表明,最高气温对灌浆速度的作用由自身的直接效应决定,而日照时数与最低气温对灌浆速度的作用与间接效应一致;最高气温平均值对灌浆速度的影响最重要,日照时数和最低气温平均值对灌浆速度的影响较弱;最高和最低气温平均值、日照时数均为灌浆速度的限制因子,其中最高气温平均值对灌浆速度变化的决策作用最大。     

Stress‐dependent hardening and failure surfaces of dry sand

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.     

Tectonic interpretation of metamorphic tectonites: integrating compositional mapping,microstructural analysis and in situ monazite dating

Interpreting tectonic histories from metamorphic tectonites requires an understanding of the linkages and feedbacks between deformation and metamorphism. Relationships between deformation and metamorphism can be divided into two broad groups: active and passive. Active relationships involve direct interactions whereby deformation directly influences metamorphic reactions or metamorphism directly affects the rate or style of deformation. One of the most important ‘active’ relationships is the role that deformation plays in helping to remove unstable reactant phases and to promote the growth of stable product phases. Passive relationships are correlations or linkages that allow the deformation history to be integrated with the metamorphic history. Compositional mapping of major and accessory phases and especially maps of larger thin section domains are particularly valuable for evaluating strain partitioning, scales of equilibrium, relationships between metamorphic textures and deformational fabrics, and in particular, for interpreting geochronological data. Petrological pseudosections are an increasingly utilized tool for interpreting microtextures and for linking deformation, metamorphism, and large‐scale tectonics. In situ geochronology and petrological analysis of chronometer phases (i.e. monazite, xenotime, titanite, allanite, etc.) are a critical part of tectonic analysis of metamorphic rocks. The electron microprobe plays an essential role in characterizing chronometer phases and placing them into the context of silicate fabrics and textures.     

Low-pressure granulite facies metamorphism in the Larsemann Hills area, East Antarctica; petrology and tectonic implications for the evolution of the Prydz Bay area

ABSTRACT Thermobarometric studies on various granulite facies areas along the Prydz Bay coast, East Antarctica (73°-79°E, 68°-70°S), show that, at around 1100 Ma, during a late Proterozoic orogeny, the rocks of the Larsemann Hills suffered a lower pressure metamorphic peak than the surrounding areas. Along the Prydz Bay coast, the rocks affected by this event include parts of the Vestfold Hills block plus all of the Rauer Group, the Larsemann Hills and the Munro Kerr Mountains. The dykes in the south-west corner of the Vestfold Hills were recrystallized during this event with little deformation at temperatures not quite as high as in the areas further south-west (650°C, 6.5 kbar) (Collerson et al., 1983), the Rauer Group was metamorphosed at 800°C and 7.5 kbar (Harley, 1987a), the Larsemann Hills at 750°C and 4.5 kbar, and the Munro Kerr Mountains probably at around 850°C and 5 kbar. Retrograde equilibration in the different areas occurred during decompression to about 10 km depth in all areas, followed by isobaric cooling at this depth. This paper shows that the peak metamorphism in the Larsemann Hills occurred at a pressure which is too low to have been the consequence of thermal relaxation of overthickened crust with normal mantle heat flow. Although other areas in Prydz Bay were metamorphosed at sufficiently high pressures so that their decompression paths are not inconsistent with a continental collision model, the inferred pre-metamorphic peak histories and the requirement of consistency with the Larsemann Hills, make it unlikely that collision followed by erosion-driven decompression is an appropriate model. We suggest that the thermal regime of the crust in the Larsemann Hills region was controlled by a perturbation in the asthenosphere, with magma invasion of the crust. We suggest that the 500 Ma event, represented in Prydz Bay by granitic outcrops at Landing Bluff and by several K/Ar ages from the Larsemann Hills area, was responsible for the final excavation of the terrane.     

Contrasting mineral parageneses in high-temperature calc-silicate granulites: examples from the Eastern Ghats, India

Abstract Three types of mineral associations are described from calc-silicate granulites from the Eastern Ghats, India, where geothermobarometry in associated rocks suggests extremely high P–T conditions of metamorphism ( c . 9 ± 1 kbar, 950° C). These mineral associations are: (i) calcite + quartz + scapolite + plagioclase, (ii) calcite + scapolite + wollastonite + porphyroblastic garnet + coronal garnet and (iii) calcite + quartz + wollastonite + scapolite + porphyroblastic garnet + coronal garnet, all coexisting with K-feldspar, titanite and clinopyroxene. The first two associations evolved through nearly isobaric cooling retrograde paths, whereas the third evolved through a nearly isothermal decompression path followed by an isobaric cooling retrograde path. Textural and compositional characteristics suggest the following mineral reactions in the calc-silicate granulites: calcite + quartz = wollastonite + CO₂, calcite + plagioclase = scapolite, calcite + scapolite + wollastonite = porphyroblastic garnet ± quartz + CO₂, CaTs + wollastonite = coronal garnet (association ii) and wollastonite + scapolite = coronal garnet (association iii) + quartz + CO₂. Andradite content in garnet was buffered by the redox equilibria wollastonite + hedenbergite + O₂= andradite + quartz (association iii) and wollastonite + andradite + CaTs + scapolite = hedenbergite + calcite + grossular + O₂ (association ii). The contrasting mineral parageneses have been ascribed to interplay of variables such as X _CO2, f _O2, f _HCl in the fluid, bulk Na content and the nature of the retrograde P–T–X _CO2 paths through which the rocks evolved.     

麻粒岩p—T—t轨迹的研究现状

综述了近年来麻粒岩中p-T-t轨迹的研究现状。内容涉及到麻粒岩相变质作用的温压条件及时间跨度,同时指出:结合岩石中的矿物组合、后成合晶及反应结构,利用矿物温压计是目前确定p-T-t轨迹的主要手段。     

超高压变质作用研究现状及问题

本文从超高压变质作用的矿物学、Ｐ－Ｔ－ｔ轨迹和超高压地体抬升、保存机制三个方面总结了近年来超高压变质作用研究所取得的重要进展和存在的问题。超高压变质作用的矿物学研究正在向深入发展，其Ｐ－Ｔ－ｔ轨迹具有三种成因类型。而其超高压地体的抬升、保存机制则是争论的焦点，其中增生楔模式（Ｐｌａｔｔ，１９８７）和连续俯冲─仰冲机制较好地解释了抬升过程，但也存在一些问题需进一步研究。