伊利石结晶度Kübler，Weaver和Weber指数关系式常数的确定与应用

根据衍射峰具有的不同分布特点推导出了14个伊利石结晶度Kübler指数，Weaver指数和Weber指数关系式中常数项C1-C14的数值，提出了PearsonⅦ分布中形态参数μ与C5，C6，C11，C12的4个定量方程。由此，14个伊利石结晶度指数关系式可直接用于实际计算。根据阿尔卑斯复理石伊利石形态特征Sc=0.731，由这些关系式进行近变质带上下界线的转换得出与Kübler指数0.42～0.25。△2θ界线对应的Weaver指数和Weber指数的界线值分别为5.8～17.6和300～179。讨论了在自然干燥状态下直接进行伊蒙混层鉴定的基本原理。     

济阳坳陷桩海地区中生界同位素年代地层学研究

济阳坳陷中生界分布广泛,具有油气成藏的基本地质条件,并取得了一定的勘探发现,但其勘探程度和研究程度相对较低,包括地层划分、沉积体系、储层特征、控藏因素等。特别是地层时代、分层与分界等基本的地质问题尚存在不同的观点和认识。根据区内14口井的10个火山岩全岩样品和79个小于2μm的泥岩自生伊利石样品,开展K-Ar法同位素年代地层学测定,分别确定了中生界的坊子组、蒙阴组、三台组和西洼组的绝对年龄值,将坊子组划归下侏罗统,蒙阴组为中侏罗统,缺失上侏罗统,并明确了各组的接触关系。     

Characteristics and distribution of clay minerals and their effects on reservoir quality: Huagang Formation in the Xihu Sag,East China Sea Basin

Abstract

The characteristics and distribution of clay minerals and their effects on reservoir quality in the Huagang sandstones in the Xihu Sag, East China Sea Basin were studied by using X-ray diffraction, casting thin-sections, scanning electron microscopy, electron microprobe analysis, fluid inclusion analysis, constant-rate mercury injection and nuclear magnetic resonance. Clay minerals consist of kaolinite, chlorite, illite and illite–smectite mixed layer (I/S); kaolinite forms from dissolved feldspars, chlorite occurs as clay coatings that are transformed from clay precursors owing to the flocculation of suspended detrital clays or the crystallisation of pore fluids, and illite forms from the illitisation of detrital smectite, authigenic kaolinite and K-feldspars. Clay distribution is controlled by sedimentary environments, burial history and lithologies. Typical reservoirs in the western sub-sag are thin and developed in braided river facies at relatively shallow burial depths with clays dominated by kaolinite. However, typical reservoirs in the central inversion tectonic zone are thicker and developed in a braided delta front facies at deeper burial depths with clays mainly consisting of chlorite, illite and I/S. High-quality reservoirs are characterised by coarse granularity, high quartz content and low clay content with widespread development of chlorite coatings that inhibit quartz cements at low temperatures. At higher temperatures, the high-quality reservoirs develop more pores providing growth space for quartz cements and result in the coexistence of chlorite coatings and quartz cements. The high-quality reservoirs are controlled by their lithological characteristics rather than chlorite coatings. Illite and I/S clays create severe damage to reservoirs by reducing the size and connectivity of pore-throats.     

Diagenetic and low-grade metamorphic terranes of Gaspé Peninsula related to the geological structure of the Taconian and Acadian orogenic belts, Quebec Appalachians

Abstract Illite crystallinity (IC) measurements, determination of the proportion of 2M mica-polytypes and organic-matter reflectance measurements establish regional diagenetic/low-grade metamorphic trends for the Taconian and Acadian belts of Gaspé Peninsula. IC varies as a function of many factors besides maximum burial temperature and heating time. Correlation between IC and %2M illite polytypes for the Fortin Group and Temiscouata Formation suggests (i) that the amount of high-grade detrital mica in the samples is low, and (ii) that IC can be used with some confidence as an estimator of regional thermal maturation levels. Correlation of these parameters with available organic reflectance values further supports this assumption. The illites of the Temiscouata and western Fortin groups are mostly phengitic in composition, whereas in the eastern outcrop belt they are more Mg- and Fe-rich (celadonitic), but generally also of lower grade and lower 2M content. The d(060) values for illites measured on the unorientated <2-μm fraction of samples fall between 1.502 and 1.503 Å (range: 1.500–1.504 Å), indicating relatively low octahedral occupancy by Mg and Fe (between one-fifth and one-third of the available spaces). Pyrophyllite and paragonite were not detected. Chlorites are Fe-rich and ripidolitic. The IC map for the Acadian belt of the peninsula displays general congruence between IC contours (2200 sample points) and structural trends for the 27,000-km² area. The highest grades (anchimetamorphic) are associated with the oldest rocks (Honorat and Matapedia groups) exposed in the cores of major anticlines. Anchimetamorphic grades associated with the western outcrop belt of the Lower Devonian Fortin Group require 7–8 km of subsidence to accommodate sufficient thickness of overlying younger rocks (on top of 4–5 km of Fortin Group deep-water clastics) to explain the grades in terms of burial metamorphism assuming a geothermal gradient of 30° C km^?1. The lowest-grade diagenetic rocks occupy a large area in the northeastern part of the peninsula, smaller areas in the northwestern part of the Acadian belt, in the centre of Chaleurs Bay synclinorium, and in the Ordovician Mictaw Group. The contact between the Taconian and Acadian belt is marked by a distinct maturation discontinuity. The Grand Pabos fault juxtaposes rocks of contrasting maturation levels (Matapedia Group against Fortin Group) in the west, but shows no maturation offset further east in the Honorat Group. The fault zone limiting the Fortin Group in the north is also associated with a major IC jump.     

贵州梵净山前寒武系甚低级变质作用研究

本文运用伊利石结晶度、绿泥石结晶度、云母b0值和绿泥石地质温度计研究了梵净山前寒武系甚低级变质作用。结果表明经Kisch伊利石结晶度标样校正的伊利石结晶度Kübler指数为0.20~0.99°Δ2θ,绿泥石结晶度árkai指数为0.22~0.63°Δ2θ。由此阐明梵净山前寒武系经历了成岩作用到浅变质作用的影响,迄今依然保留了成岩带、近变质带和浅变质带的岩石记录。成岩岩石具有伊蒙混层特征成岩指示矿物,浅变质带具有钠云母特征变质指示矿物。钾云母(伊利石)b0值范围为:0.9000~0.9045nm;平均0.9018nm,b0值累积频率曲线分布介于典型中压—中低压系列之间,估算的压力为366MPa。峰期变质温度为293~364℃,平均342℃,古变质温压梯度为27℃/km。近变质带界线穿越地层和梵净山背斜轴线,表明甚低级变质作用为成岩-构造运动同期或后期构造增厚引起下部和底部岩石随温压的升高而产生的。     

成矿流体对德兴斑岩铜矿床中伊利石结晶度的控制作用

伊利石广泛存在于铜厂大型斑岩铜矿床内,是特征的热液蚀变矿物,其结晶度和膨胀层含量受携带矿质的热液流体量控制。以浸染状强矿化为特征的斑岩体中上部及接触带附近伊利石结晶程度较好,主要是高水／岩比作用的结果。同时指示出伊利石结晶程度好的部位,矿化品位高,蚀变程度也强。     

Progressive,episodic deformation in the Mexican Fold–Thrust Belt (central Mexico): evidence from isotopic dating of folds and faults

We used illite Ar/Ar dating to obtain absolute ages of folds and shear zones formed within the Mexican Fold–Thrust Belt (MFTB). The methodology takes advantage of illite dating in folded, clay-bearing layers and the ability to obtain accurate ages from small-size fractions of illite using encapsulated Ar analysis. We applied our approach to a cross-section that involves folded Aptian–Cenomanian shale-bentonitic layers interbedded with carbonates of the Zimapán (ZB) and Tampico–Misantla (TMB) Cretaceous basins in central-eastern Mexico. Basinal carbonates were buried by syn-tectonic turbidites and inverted during the formation of the MFTB in the Late Cretaceous. Results from folds and shear zones record different pulses of deformation within this thin-skinned orogenic wedge.

Mineralogical compositions, variations in illite polytypes, illite crystallite size (CS), and Ar/Ar ages were obtained from several size fractions in limbs and hinges of the folds and in the shear zones. 1M_d-illite polytype (with CS of 6–9 nm) dominates in two folds in the TMB while 2M₁-illlite (with CS of 14–30 nm) dominates in the third fold, in the ZB, and in the fold/shear zone. From west (higher grade) to east (lower grade): Ar retention ages indicate shearing occurred at ~84 Ma in the westernmost shear zone, folding at ~82 Ma in the ZB with subsequent localized shearing at ~77 Ma, and Ar total gas ages constrain the time of folding at ~64 Ma on the west side of the TMB and ~44 Ma on the eastern edge. These results are consistent with the age and distribution of syn-tectonic turbidites and indicate episodic progression of deformation from west to east.     

河北省邯邢地区高岭石伊利石粘土矿床特征及找矿方向

邯邢地区高岭石、伊利石粘土矿赋存于石炭系本溪组、太原组,二叠系山西组、下石盒子组、上石盒子组的7个层位.矿体主要呈层状产出,厚度变化较大.矿石主要由片状高岭石组成,次要和少量矿物为绢云母、石英、黑云母等.矿床成因包括沉积矿床(如石炭-二叠系高岭石伊利石粘土矿)、风化残积矿床(如软质高岭石粘土矿床).该地区可划分出临城竹...     

Illite/smectite transformation in detrital glaucony during burial diagenesis of sandstone: A study from Siri Canyon – Danish North Sea

Detrital glaucony in the Palaeogene glauconitic sandstones in Siri Canyon, Danish North Sea, has been analysed from 15 exploration wells by X‐ray diffraction, electron microprobe and scanning electron microscopy. These sandstones consist of mixed‐layer illite/smectite and have a large variability in chemical composition and structure. In the most shallow wells (ca 1700 m), the glaucony is rich in Fe and consists of mixed‐layer illite/smectite with random‐interstratification (R = 0). In the depth interval from 1700 to 2000 m, the composition changes as Si is incorporated. The structure changes to ordered R = 1. Further increase in burial leads to the loss of Fe. Ordered R = 3 mixed‐layer illite/smectite is recognized from burial depths of 2200 m. The proportion of illite in illite/smectite mixed layers increases only slightly with depth and temperature. Although the structural changes generally are associated with chemical changes, they can also take place isochemically when the detrital glaucony is tightly embedded in earlier cement, which prevented chemical exchange. The glaucony transformation in the Siri Canyon sandstones partly reflects a supply of Si and partly significant loss of Fe. Thus, the glaucony transformation relates to the general diagenesis of the host sandstone. These sandstones are cemented by microquartz at an early stage, followed by precipitation of Fe‐rich grain‐coating berthierine or chlorite.     

Cartographie du métamorphisme faible à trés faible dans les Alpes françaises externes par l’utilisation de la cristallinité de l’illite

Résumé

On présente les tracés proposés, pour la nouvelle carte du métamorphisme alpin, entre la bordure du Mont Blanc et la région de Digne. Ils délimitent le domaine de l’anchizone. Les limites diage-nèse-anchizone et anchizone-épizone sont définies grâce à l’indice de cristallinité des illites après étalonnage. Les données utilisées proviennent pour une bonne part de mesures inédites. La minéralogie de la fraction argileuse, étudiée simultanément, fournit des informations complémentaires.

L’anchizone constitue une auréole plus ou moins large à l’W des massifs cristallins; elle tend à disparaître à la bordure SW du Pelvoux. Au N, l’épizone est générale dès la bordure externe des Aiguilles Rouges, alors qu’au S, elle ne débute qu’à l’E du Pelvoux. Cela est conforme au schéma général du métamorphisme alpin croissant en direction de l’E et du N.

On peut relever les perturbations et points particuliers suivants :

— l’existence de « métamorphisme transporté » dans les Préalpes du N, la région de Digne et l’Embrunais;

— au N, dans le massif de Platé, une « butte témoin » d’anchizone, en gradient inverse dans le substratum des nappes helvétiques;

— vers le col de la Madeleine, un gradient décroissant vers l’E jusqu’à la diagenèse, interrompu par un recouvrement tectonique (ultradauphinois);

— dans le Champoléon, sur la limite S du Pelvoux, un petit affleurement d’anchizone où les lignes d’iso-cristallinité sont déformées par la tectonique anté-priabonienne; l’anchizone serait anté-priabonienne, peut-être même anté-sénonienne.

La comparaison avec les résultats obtenus par d’autres méthodes (inclusions fluides, mesures isotopiques) confirme l’allure générale des transformations. Toutefois, il existe une contradiction avec certains résultats fournis par le pouvoir réflecteur de la vitrinite sur le pourtour de Belledonne.

Pour rendre compte des données disponibles il est nécessaire de faire intervenir plusieurs épisodes, que l’on peut situer à des époques anté-priabonienne, post-priabonienne et anté-nappe, puis post-nappe. L’âge et le nombre exact de ces épisodes sont inconnus.

On souligne qu’il ne faut pas s’attendre à observer de changement décelable au passage des frontières à l’anchizone : elles ne constituent pas des limites de faciès pétrographiques. Ainsi on rencontrera l’épizone d’après les ICr alors que le faciès schiste vert n’est pas encore atteint.