Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

法向承力锚拖曳安装过程的整体模拟

法向承力锚(Vertically Loaded Plate Anchor,VLA)是一种适用于深水的新型系泊基础,它的拖曳安装过程直接决定了其系泊定位的精度和锚体的最终承载能力。综合考虑VLA锚体、锚泊线和上部船体的运动,建立了一种新的准静力整体分析模型。模型包括不断贯入海床的锚体、锚泊线(土中反悬链段和水中悬链段)和安装船体三部分,针对确定的锚泊线长度,安装船运动张紧锚泊线进行安装的过程,计算了此过程中锚体的运动轨迹、锚泊线形态和作用在船体上的锚泊线张力矢量的变化,重点分析了不同抛链长度和海床土体的参数对安装过程控制的影响,发现链长与水深之比达到5时,接近极限贯入深度。     

深海系泊法向承力锚模型实验系统

法向承力锚是一种新型的拖曳嵌入式系泊基础.这种锚的工程应用仅有10 a时间.国内在此项技术上尚属空白.通过实验系统的设计,介绍了针对这种新型拖曳锚展开模型实验研究的实验平台.利用一些新型传感器和巧妙的机件设计,不仅实现了实验量测方法的创新,而且达到了经济实用的目的.实验结果也验证了整个系统设计的可靠性.     

Computation of solitary waves during propagation and runup on a slope

A numerical time-simulation algorithm for analysing highly nonlinear solitary waves interacting with plane gentle and steep slopes is described by employing a mixed Eulerian–Lagrangian method. The full nonlinear free surface conditions are considered here in a Lagrangian frame of reference without any analytical approximations, and thus the method is valid for very steep waves including overturning. It is found that the runup height is crucially dependent on the wave steepness and the slope of the plane. Pressures and forces exerted on impermeable walls of different inclinations (slopes) by progressive shallow water solitary waves are studied. Strong nonlinear features in the form of pronounced double peaks are visible in the time history of pressure and force signals with increasing heights of the oncoming solitary waves. The effect of nonlinearity is less pronounced as the inclination of the wall decreases with respect to the bottom surface.     

强光照和黑暗条件下刺参体壁的基因表达差异

参对光照变化非常敏感,研究刺参对光照的分子响应非常重要。本研究应用RNA测序获取了刺参暴露于强光（“强光”）、正常光照（“对照”）和完全黑暗（“黑暗”）环境下体壁的基因表达谱情况,通过“对照”与“黑暗”,“对照”与“强光”和“黑暗”与“强光”的比较,在|log₂ ratio|≥1和FDR≤0.001的标准下分别发现了1161、113和1705个差异表达基因（DEGs）。基因本体分析表明,“cellular process”和“binding”在“生物过程”和“分子功能”类别中的DEGs富集最多,而“cell”和“cell part”在“细胞组分”类别中的DEGs富集最多。将DEGs与Kyoto Encyclopedia基因和基因组数据库上的于214、41和229条通路进行比对,发现了51、2和57条通路分别显著富集。本研究发现的光特异性DEGs可作为深入研究刺参对光照变化的生化适应机制的重要目标基因。     

钙质土中重力串锚水平承载力特性有限元研究

目前没有规范给出串锚的水平承载力计算公式,为了利用有限元法研究串锚水平承载力特性,采用相关理论计算以及室内试验的方法来验证有限元法模拟计算的可靠性。实践证明,有限元法具有较高的计算精度。利用有限元分析软件ABAQUS建立了串锚-土体模型,模拟串锚在水平荷载作用下破坏过程,研究了串锚在水平荷载作用下破坏机理,从而得到了串锚水平承载力特性。在相同的工况条件下,串锚的水平承载力与其锚链长度有关,在一定范围内,增加锚链的长度可以提高串锚的水平承载力;串锚的水平承载力不是相应的单个锚的水平承载力相加,其水平承载力小于相应的单个锚水平承载力之和,在进行串锚水平承载力设计计算时应给与相应的考虑。     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

带横隔板局部开孔沉箱在斜向波作用下的受力研究

基于线性势流假定,对斜向波作用下带横隔板局部开孔沉箱防波堤的水平波浪力进行了理论研究。给出了开孔沉箱法向水平力和横隔板受力的理论计算方法,在极限情况下波浪力的计算结果与文献中的已有结果一致。利用数值算例分析了开孔沉箱总水平力的主要影响因素。开孔沉箱法向总水平力的减小主要集中于结构上半部分波浪影响范围以内。增加单个开孔沉箱的长度有利于减小结构所受总水平波浪力。当波浪入射角或沉箱前开孔墙孔隙影响系数幅值较大时,开孔沉箱横隔板上总水平力的最大值要超过相应的沉箱法向总水平力,此时要注意横隔板的强度问题。     

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.     

Behavior of drag anchor in clay with linearly increasing shear strength under unidirectional and combined loading

Drag anchor is a widely used economical anchor option for offshore floating structures. The anchor behavior under unidirectional loading and combined loading is important for anchor selection. The anchor behavior under combined loading, characterized by the yield envelope, can also be used for the prediction of anchor installation, which is still an issue in anchor design. However, most existing studies on anchor capacity are for plate anchors which focused only on the anchor pullout capacity in soil with uniform shear strength. The behavior of drag anchor under unidirectional and combined loading in soil with linearly increasing shear strength profile is seldom investigated. The current 2D finite element studies investigate the anchor behavior for a horizontal anchor fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then based on the results of anchor unidirectional loading behavior, the yield envelopes for anchor under combined loading for both shallow and deep embedded flukes are studied. The effect of anchor embedment depth, soil non- homogeneity, soil overburden pressure and the soil/anchor interface breakaway conditions are studied to provide insight for drag anchor design.