Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.     

淤泥质潮滩地貌演变中的水动力及生物过程研究进展

淤泥质潮滩对于海岸防护、增加土地资源、保持生物多样性等具有重要作用。从淤泥质潮滩演变的主要驱动因子——潮流、波浪、生物作用及地下过程四个方面回顾和总结了潮滩演变动力地貌过程的相关研究进展,提出应关注潮滩短期演变规律、波浪与浮泥作用机理、生物生长与潮滩演变定量关系,以及地下过程作用机理等。     

黄河三角洲芦苇湿地生态修复效果评价研究

基于黄河三角洲芦苇湿地退化现状及所实施的生态修复工程,以正负参照系选取了4块不同修复年限的样地,从湿地生态系统的环境质量、结构与功能的角度构建了湿地修复效果评价指标体系,利用层次分析法确定各指标权重,利用模糊综合评价法对黄河三角洲盐渍化芦苇湿地的修复效果进行定量评价。结果表明:黄河三角洲芦苇湿地4年修复期的样地评价得分为4.01,2年修复期的样地评价得分为3.16,对应评价结果分别为"优"和"良"的等级。相比负向对照,修复区的水体指标和土壤指标参数显著改善,而植被生物量和密度与自然样地还有较大差距,说明生物群落的建立需要更长的时间;同时,湿地水资源管理是该区芦苇湿地生态修复工程的关键,应根据芦苇不同生长期的需水量,制定合理的抽灌制度,达到洗碱脱盐和植被建群的双重目的。     

A new assessment model for evacuation vulnerability in urban areas

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.     

Optimal routing for waste collection: a case study in Singapore

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.     

基于高效生态农业布局导向性的资源环境承载力评价—以黄河三角洲高效生态经济区为例

该文在对研究区资源环境本底基本了解的基础上,建立了包括耕地资源、水资源、社会经济资源、土壤环境、极端气候发生率和地质环境6个二级指标的资源环境承载力评价指标体系,采用定性和定量相结合的方法,利用层次分析法确定相关指标权重,分别对6个要素进行承载力评价。在各单元要素评价基础上,结合黄河三角洲高效生态经济区农业发展要求,划分出了沿海湿地生态系统保护带、北部盐渍化土质特色种植区、南部优质粮食生产区和果蔬集中种植区4个生态农业布局适宜区,并提出发展建议。     

基于层次分析法的德州地面沉降易发区的可拓学划分应用

基于物元模型的可拓学理论分析,提出华北平原德州地面沉降易发区的可拓学划分方法。利用地面沉降易发性分级、分类标准和影响因子分析,构造出经典域物元和节域物元,应用物元和可拓集合中的关联函数,建立了易发性等级综合评判的可拓评价模型,通过基于层次分析法的可拓学评价分析,采用正方形等间距(2km×2km)剖分了135个网格,再将剖分单元转化成面元,经过等值差分,得到了地面沉降易发区划结果。计算结果显示,可拓学方法能够实现定量化、多因子评价地面沉降易发性等级问题,从而科学合理地指导地面沉降综合分区防治。     

Applying disk-based discontinuous deformation analysis (DDA) to simulate Donghekou landslide triggered by the Wenchuan earthquake

In this paper, for the first time, disk-based discontinuous deformation analysis (DDA) is applied to simulate a real landslide triggered by an earthquake. For this purpose, the kinematic behaviour of the Donghekou landslide triggered by the Wenchuan earthquake is simulated and the results obtained using disk-based DDA are compared with actual data. The comparisons show that there is a good agreement between the results obtained using disk-based DDA and observed data. The simulation results provided an understanding of the failure behaviour and temporal evolution of the landslide. This study shows that disk-based DDA is a practical numerical tool that can be used to simulate the post-failure behaviour of landslides triggered by an earthquake.