Effect of connecting rain barrels on the storage size reduction

In this article, the possibility of sharing rain barrels and the potential benefit of reducing storage size through physical and non‐physical connections of rain barrels in a community are investigated. Using the concepts of homogeneous/heterogeneous users in rainwater harvesting systems (RWHS), two simple cases of a community composed of four prospective users are examined. The first is performed with the users who have the same mean and variance in water demands (homogeneous users), and the second is with the users with different means and variances (heterogeneous users). To take account for the rainfall characteristics in different places, historical records from six cities in the USA are used for storage–reliability–yield analysis. The result indicates that required total storage can be reduced by connecting multiple rain barrels. In addition, a significant difference is found between homogeneous and heterogeneous user groups. Homogeneous users do not achieve a substantial benefit from connecting their rain barrels; these users may even be disadvantaged by sharing. In contrast, heterogeneous users receive benefit by reducing the total required storage. Most benefit is expected between users with maximum difference in mean water demands. The reduction in storage size was as considerable as 37% in this study. The quantity of storage reduction depends on locations and target reliabilities. Knowledge of the benefits and limitations of rain barrel connections can improve RWHS performance through ability to customize a network plan for individual users. Copyright © 2011 John Wiley & Sons, Ltd.     

Preconditioned IDR(s) iterative solver for non‐symmetric linear system associated with FEM analysis of shallow foundation

Non‐associated flow rule is essential when the popular Mohr–Coulomb model is used to model nonlinear behavior of soil. The global tangent stiffness matrix in nonlinear finite element analysis becomes non‐symmetric when this non‐associated flow rule is applied. Efficient solution of this large‐scale non‐symmetric linear system is of practical importance. The standard Krylov solver for a non‐symmetric solver is Bi‐CGSTAB. The Induced Dimension Reduction [IDR(s)] solver was proposed in the scientific computing literature relatively recently. Numerical studies of a drained strip footing problem on homogenous soil layer show that IDR(s = 6) is more efficient than Bi‐CGSTAB when the preconditioner is the incomplete factorization with zero fill‐in of global stiffness matrix K_ep (ILU(0)‐K_ep). Iteration time is reduced by 40% by using IDR(s = 6) with ILU(0)‐K_ep. To further reduce computational cost, the global stiffness matrix K_ep is divided into two parts. The first part is the linear elastic stiffness matrix K_e, which is formed only once at the beginning of solution step. The second part is a low‐rank matrix Δ, which is re‐formed at each Newton–Raphson iteration. Numerical studies show that IDR(s = 6) with this ILU(0)‐K_e preconditioner is more time effective than IDR(s = 6) with ILU(0)‐K_ep when the percentage of yielded Gauss points in the mesh is less than 15%. The total computation time is reduced by 60% when all the recommended optimizing methods are used. Copyright © 2013 John Wiley & Sons, Ltd.     

微波等离子体炬原子发射光谱法测定铁和铝的研究

研究了低功率微波等离子体炬原子发射光谱法（ＭＰＴ－ＡＥＳ）对Ｆｅ，Ａｌ的测定。样品经气动雾化后，分别以流动注射与连续式两种方式引入ＭＰＴ。考察了用这两种进样方式时ＭＰＴ－ＡＥＳ的分析性能，证明低功率ＭＰＴ－ＡＥＳ具有良好的分析特性。     

MULTIVARIATE SELECTION OF VARIABLES IN INDUSTRIAL QUALITY CONTROL:OPTIMIZING AVIATION FUEL FINAL CONTROL

This paper deals with a typical question encountered in all industrial analytical laboratories:are all thetests performed in the laboratory to characterize the final product really necessary?In this work the cross-validation technique,Procrustes rotation techniques and statistical variable selection have been used toreduce the 26 initial British Petroleum and ASTM kerosene specification tests to ten'essential'ones.Statistical as well as chemical considerations were used to select the optimum subset of original variablesto be retained from all the possible ones.     

How does landfill leachate affect the chemical processes in a lake system downgradient from a landfill site?

A field study on the geochemical properties of a chemically-stressed limnic environment was performed in Lake Silbersee, which receives leachate water of high inorganic loading from an upgradient landfill site. The highly concentrated sulfate ion in groundwater, when entering the pore water system of the lake, gives rise to an intensive microbial sulfate reduction. A diagenetic approach was used to explain the existence of a marine-like aqueous system within a geologically slightly acidic aquifer, consisting of a well-buffered lake water and an alkalinity producing, excess sulphide containing sediment pore water system.     

论工业企业防震减灾

本文论述了我国工业企业防震减灾现状，提出工业企业防震减灾的目标和指导原则，以及部分工业企业的防震减灾措施和对策。     

Analysis of a large extent aeromagnetic survey near the geomagnetic equator (Minas Gerais,Brazil)

A large extent aeromagnetic survey, covering a 9°×9° degree of a Precambrian shield area in SE Brazil, was used to analyse long wavelength magnetic anomalies with the purpose of determining the magnetic structure of the lithosphere.Data analysis based on a novel approach to the estimation of the parameters in the statistical model ofSpector andGrant (1970), reveals a highly magnetized lower crust, bounded by an essentially non-magnetic upper mantle. The highly magnetized layer can be associated with a higher density lower crust model, derived from gravity and seismic data available in the area, suggesting a compositional transition from upper to lower crust.It was also verified that the operation of reduction to the pole, which is singular at the geomagnetic equator, performs quite satisfactorily at the low geomagnetic inclination of the area, bringing into accordance the long wavelength anomalies with the structural trends.     

Indian Ocean tsunamis: environmental and socio-economic impacts in Langkawi, Malaysia

We report the results of a study of the physical characteristics and socio-economic impacts of the Indian Ocean Tsunami of 26 December 2004 on the tourist island of Langkawi, Malaysia. In comparison with many other locations struck by the tsunami, the immediate physical and socio-economic impacts in Langkawi were relatively minor. A detailed survey of the watermark and ground elevations was undertaken in the worst affected area between Sungei Kuala Teriang and Sungei Kuala Melaka. Here, the tsunami reached a maximum elevation of 4.29 m as it crossed the coast, with a maximum flow depth of 2.0 m and a very consistent run-up elevation relative to mean sea level of 300 ± 10 cm. The tsunami inundated inshore areas for 300 m and penetrated inland along creeks for 500–1000 m. Structural damage to buildings was confined to within 50–150 m of the shoreline where about 10% of the houses were completely destroyed and 60–70% suffered significant structural damage. Damage was particularly severe in areas where there was no engineered coastal protection, but while coastal revetments did provide enhanced protection for houses at the waterfront, the coastline in the study area appeared to be more heavily impacted than elsewhere in Langkawi because wave energy was focused on the area by offshore breakwaters built to protect the Langkawi port and airport. Emergency response after the tsunami was rapid and efficient but would have been improved if the local police station had not been rendered inoperative by the first wave, and if a mechanism had been in place to ensure that informal advance warnings transmitted between Phuket (Thailand), Langkawi and Penang (Malaysia) by tourist operators could have been more widely disseminated.     

Pure aluminium shear panels as dissipative devices in moment‐resisting steel frames

The use of energy dissipation systems for the seismic control of steel structures represents a valid alternative to conventional seismic design methods. The seismic devices currently employed are mostly based on the metallic yielding technology due to the large feasibility and efficiency they can provide. Within this context, in the current paper an innovative solution based on the adoption of low‐yield‐strength pure aluminium shear panels (SPs) for seismic protection of steel moment‐resisting frames is proposed and investigated. In order to prove the effectiveness of the system, a wide numerical study based on both static and dynamic non‐linear analyses has been carried out, considering a number of different frame‐to‐shear panel combinations, aiming at assessing the effect of the main influential parameters on the seismic response of the structure. The obtained results show that the contribution provided by aluminium SPs is rather significant, allowing a remarkable improvement of the seismic performance of the structure in terms of stiffness, strength and ductility, with the possibility to strongly limit the damage occurring in the members of moment‐resisting frames. In particular, it is clearly emphasized that the stiffening effect provided by SPs allows a more rational design procedure to be adopted, since the serviceability limit state check does not lead to unavoidable and uneconomical increase of the size of main structural members. Copyright © 2007 John Wiley & Sons, Ltd.     

Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity

This paper investigates the non-linear seismic behavior of structures such as slender unreinforced masonry shear walls or precast post-tensioned reinforced concrete elements, which have little hysteretic energy dissipation capacity. Even if this type of seismic response may be associated with significant deformation capacity, it is usually not considered as an efficient mechanism to withstand strong earthquakes. The objective of the investigations is to propose values of strength reduction factors for seismic analysis of such structures. The first part of the study is focused on non-linear single-degree-of-freedom (SDOF) systems. A parametric study is performed by computing the displacement ductility demand of non-linear SDOF systems for a set of 164 recorded ground motions selected from the European Strong Motion Database. The parameters investigated are the natural frequency, the strength reduction factor, the post-yield stiffness ratio, the hysteretic energy dissipation capacity and the hysteretic behavior model (four different hysteretic models: bilinear self-centring, with limited or without energy dissipation capacity, modified Takeda and Elastoplastic). Results confirm that the natural frequency has little influence on the displacement ductility demand if it is below a frequency limit and vice versa. The frequency limit is found to be around 2 Hz for all hysteretic models. Moreover, they show that the other parameters, especially the hysteretic behavior model, have little influence on the displacement ductility demand. New relationships between the displacement ductility demand and the strength reduction factor for structures having little hysteretic energy dissipation capacity are proposed. These relationships are an improvement of the equal displacement rule for the considered hysteretic models. In the second part of the investigation, the parametric study is extended to multi-degree-of-freedom (MDOF) systems. The investigation shows that the results obtained for SDOF systems are also valid for MDOF systems. However, the SDOF system overestimates the displacement ductility demand in comparison to the corresponding MDOF system by approximately 15%.