兴蒙造山带—华北克拉通地球化学走廊带沉积物主成分的含量与空间分布研究

选取兴蒙造山带—华北克拉通地球化学走廊带上沉积物的SiO_2、Al_2O_3、CaO、MgO、Na_2O、K_2O、TFe_2O_3、FeO、TiO_2、MnO、P_2O_5、CO_2、H_2O~+、pH十四个指标,研究其在不同二级构造单元、地理景观、土壤类型、降雨量等级下的含量与空间分布特征,并讨论该地球化学走廊带上化学蚀变指数。结果表明:在兴蒙造山带—华北克拉通地球化学走廊带上,作为沉积物主体的SiO_2、Al_2O_3两者含量为明显负相关而空间分布表现出此消彼长的特征;CaO、MgO、CO_2高含量分布区则与碳酸盐岩地层或含碳酸盐矿物的土壤有关,而MgO的高含量还与走廊带上镁铁质基性-超基性岩有一定关系,表明了这三个指标的高含量受特定岩性或矿物的影响较大;Na_2O、K_2O含量除了受继承的基岩影响外,还受到后期的风化作用和气候及自身地球化学性质等复杂因素综合影响,对Na_2O来说尤为如此;TFe_2O_3、MnO、TiO_2、P_2O_5相对于在地质背景复杂地段,经过冲积平原的沉积物混匀后,含量差异更小;相对干冷的内蒙古半干旱草原的气候条件有利于FeO存在,使得其相对燕山地区含量差异较TFe_2O_3要小,在章丘以南相对温暖湿润地区更易被氧化而导致其含量整体较低;北方干冷气候条件下,沉积物H_2O~+含量普遍较低,局部高含量位于碳酸盐岩地层或第四系分布区;走廊带上的pH值反映了沉积物偏碱性的特征,而在章丘以南的地区随着降雨量的增加,相对温暖湿润的气候条件,沉积物pH值表现为中性-偏弱酸性;兴蒙造山带—华北克拉通地球化学走廊带沉积物的CIA值反映出在寒冷、干燥气候条件下低等的化学风化程度,兴蒙造山带沉积物平均风化程度相对华北克拉通沉积物的平均风化程度差异变化相对要小,显示兴蒙造山带的降雨量与温度等风化影响因素变化较小。作为反映元素的地球化学亲和性的量化指标,离子电位可以更好地帮助理解沉积物元素的含量和空间分布差异。     

层状边坡滑动边界强度参数取值方法研究

滑坡滑带土强度参数取值的准确性,决定了滑坡稳定性计算的可靠程度。因此获得准确、可靠的滑动边界强度参数至关重要。然而在实际情况中,由于取样位置试样的代表性,以及试样转运过程中保存条件的限制,现场所取得的滑带土在室内试验得到的强度参数已经不能完全反映真实环境下的抗剪强度。因此考虑软弱夹层、滑带土各种物理和力学指标间存在必然联系,并表现出特定的规律性,尝试通过试验,揭示指标间的关联规律,并建立了相关性好的关系式,据此评价滑动边界的抗剪强度参数。     

新疆博格达山北麓白杨河剖面页岩地球化学特征及其地质意义

通过博格达山北麓白杨河剖面芦草沟组页岩的地球化学特征的综合研究,讨论了芦草沟组页岩的元素富集特征和沉积环境以及源区物源特征和构造背景。结果表明:1研究区页岩P元素极为富集,这受控于页岩中凝灰质火山灰夹层的广泛发育;2对比于世界页岩微量元素分布,白杨河页岩相对富集Li、B、Pr、Tb、Dy、Ho、Er、Tm和Lu元素,其他元素相对亏损;3白杨河剖面页岩地化参数揭示芦草沟组自下而上气候由温湿向干热转变,进而引起水体由淡水向咸水的转变和还原程度的进一步加强;4物源区遭受低级-中等风化程度,物源类型主要为长英质火成岩,其次为铁镁质火成岩;5物源区大地构造背景以大陆岛弧-活动大陆边缘构造背景为主。     

ASD地面光谱仪在新疆白杨河铀矿床蚀变信息研究中的应用

新疆白杨河铀矿床是我国目前已探明的中型矿床,矿床蚀变特征的研究有助于对白杨河矿床外围及深部找矿提出更好的找矿认识。使用ASD可见光-短波红外地面光谱仪对白杨河矿床地表以及钻孔岩心进行光谱测量,发现了矿床中蚀变矿物主要有高铝绢云母、中铝绢云母、低铝绢云母、绿泥石、蒙脱石、赤铁矿、褐铁矿等。矿床地表铀矿化异常地段主要发育高铝绢云母蚀变;钻孔岩心中铀矿化富集部位蚀变矿物组合为高铝绢云母、绿泥石、赤铁矿。研究结果可为矿床外围及深部铀矿勘探提供参考与借鉴。     

山岭隧道工程综合地质勘察方法探讨

山岭隧道工程具有隐蔽性、施工复杂性、地层条件和周围环境不确定性等特点,采用科学的勘察方法,是查明隧道岩土体工程地质条件的有效手段。本文以海淀区西山隧道为依托,针对隧道工程勘察中的关键地质问题,运用工程地质测绘、钻探、工程物探、水文地质勘查等综合勘察方法,有效地查明隧址区的地质构造、岩土体结构和地下水分布特征,全面、客观地评价隧道进出口段边坡及仰坡稳定性、隧道围岩质量与稳定性、隧道涌水量、地应力及有害气体等工程地质问题,并针对不良地质现象提出防治对策,以期为工期紧张、地形困难且日趋增多的山岭隧道工程地质勘察,提供可以借鉴的模式和方法。     

遥感技术在内蒙古东乌珠穆沁旗萨麦地区的找矿应用

本文以内蒙古东乌珠穆沁旗萨麦地区1:5万巴彦塔拉等4幅区域地质调查范围为研究区,以ETM+影像数据为信息源,以波谱理论为基础,从遥感图像中提取蚀变信息继而进行遥感找矿实践。针对区内铁染、羟基蚀变类型使用主成分分析等方法,将研究区划分为10个异常区,结合区域构造特征情况,对异常区域开展了1:1万路线调查,综合判定后,选择了4个找矿靶区进行了化探剖面探测并进行了成果分析,结果显示遥感蚀变信息与野外调查和化探异常吻合较好。     

专题地质填图及有关问题讨论

面积性地质调查及填图是今后地质调查的主要工作,如何做好这个工作,并实现地质调查和科研一体化,特别是在已有填图基础上,如何部署和开展新的填图工作,是一个亟待回答的新问题。专题地质填图是针对存在的重要地质或资源、环境问题,或是针对特定目标地质体等,以解决特定问题或满足社会特定需求为主要目的、填图与研究融为一体的地质填图,填图的范围和比例尺依据解决问题和目标地质体而定。专题地质填图是以问题和需求为驱动,是对已有的综合地质填图的补充和提高,是高效实现地调科研一体化的一种方式。论述了专题填图的内涵、必要性,以及开展专题填图的方式和方法。     

Magnetic measurements in electrical prospecting by resistivity methods

The electrical resistivity and induced polarization (IP) methods are widely used in geological mapping, prospecting and exploration of mineral deposits, engineering geology, hydrogeology, archaeology, and geotechnical and environmental applications. Historically, these methods have formed the basis of the electrical prospecting technique. In these methods, a DC or low-frequency AC electrical current is introduced into the earth through a grounded transmitter line. The measured quantity is the electric field. However, if the earth’s resistivity or chargeability changes horizontally, this change gives rise to an anomalous magnetic field, which is studied by the magnetometric resistivity (MMR) and magnetic induced polarization (MIP) methods, respectively. Along with advantages, some shortcomings are inherent in the MMR and MIP techniques. Apparently, the main drawback of these methods is that the magnetic fields of both the transmitter line wire and ground electrodes on the surface are several orders of magnitude greater than the anomalous magnetic field response. This introduces a significant “noise” to magnetic-resistivity data. We investigate the potential of using a circular electric dipole (CED) in magnetometric resistivity techniques. It has been found that the application of a CED, instead of a conventional transmitter line, dramatically enhances the signal-to-noise ratio.     

Porphyry Copper Deposit Prognosis in the Middle Region of the Bangonghu–Nujiang Metallogenic Belt,Tibet, Using ASTER Remote Sensing Data

The B angonghu–N ujiang metallogenic belt is considered to be T ibet’s third copper belt after the Y ulong and G angdese copper belts. The D uolong gold‐rich porphyry copper deposit, located in the western part of the B angonghu–N ujiang belt was recently recognized as a superlarge prospect. The A dvanced S paceborne T hermal E mission and R eflection R adiometer (ASTER ) was used to characterize the D uolong porphyry deposit alteration area, and three methods, color enhancement, band ratio transformation, and spectral angle mapping, were utilized to extract the phyllic and argillic alteration zones, which are typically considered the most important predictors of porphyry copper. Seven prospecting areas, which match mapped alteration zones, were delineated in the D uolong deposit. In addition, an ASTER image of the eastern region of the B angonghu–N ujiang belt in the X iongmei area was used to extract alteration information, and an area with image characteristics similar to the D uobuza and B olong ore deposits was identified as a prospecting area. Numerous malachite outcrops were identified in the field, and both laboratory analysis and isotopic dating confirmed that the deposit had formed concurrently with the D uobuza deposit (119 M a). Geologic mapping at the 1:5000 scale was conducted in the area, and three types of ore‐bearing rocks were identified, indicating that this area has significant potential to host ore deposits. The discovery of the X iongmei copper mining area is significant for the B angonghu–N ujiang belt.     

Foundations of petroleum prediction based on the activation of geochemical processes by direct current

Petroleum prediction in local objects and the applicability of geologic environment parameters in this regard are considered. The proposed guidelines for petroleum potential prediction are based on the analysis of the distribution of typomorphic epigenetic multivalent elements loosely fixed in rocks before and after electric current treatment. The advantage of geoelectrochemical methods providing data on the chemical composition of above-productive deposits is demonstrated.