The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

A late quaternary record of eolian silt deposition in a maar lake, St. Michael Island, western Alaska

Recent stratigraphic studies in central Alaska have yielded the unexpected finding that there is little evidence for full-glacial (late Wisconsin) loess deposition. Because the loess record of western Alaska is poorly exposed and not well known, we analyzed a core from Zagoskin Lake, a maar lake on St. Michael Island, to determine if a full-glacial eolian record could be found in that region. Particle size and geochemical data indicate that the mineral fraction of the lake sediments is not derived from the local basalt and is probably eolian. Silt deposition took place from at least the latter part of the mid-Wisconsin interstadial period through the Holocene, based on radiocarbon dating. Based on the locations of likely loess sources, eolian silt in western Alaska was probably deflated by northeasterly winds from glaciofluvial sediments. If last-glacial winds that deposited loess were indeed from the northeast, this reconstruction is in conflict with a model-derived reconstruction of paleowinds in Alaska. Mass accumulation rates in Zagoskin Lake were higher during the Pleistocene than during the Holocene. In addition, more eolian sediment is recorded in the lake sediments than as loess on the adjacent landscape. The thinner loess record on land may be due to the sparse, herb tundra vegetation that dominated the landscape in full-glacial time. Herb tundra would have been an inefficient loess trap compared to forest or even shrub tundra due to its low roughness height. The lack of abundant, full-glacial, eolian silt deposition in the loess stratigraphic record of central Alaska may be due, therefore, to a mimimal ability of the landscape to trap loess, rather than a lack of available eolian sediment.     

龙门山地区泥盆纪碳酸盐与硅质碎屑的混积相与混积机理

碳酸盐与陆源碎屑的混合沉积研究至今尚未引起足够重视。文献屈指可数。扬子西经缘龙门山地区盆纪发育了了这类良好的混合沉积。作者根据实际材料，首次从这一思路出发，识别该区泥盆纪Ｅｍｓｉａｎ期到Ｇｉｖｅｔｉａｎ早期的混积相四种，混积亚相约１４种，阐明了其优势混积作用；根据混积作用特征、沉积背景关系，划分出两大混积类型，即泥质背景下的混积１型和砂灰质背景下的混积Ⅱ型；对混积作用机理进行了探讨；并指出不同级次     

The glacilacustrine sedimentary environment of Bowser Lake in the northern Coast Mountains of British Columbia, Canada

Bowser Lake, a fiord lake in the northern Coast Mountains of British Columbia, contains a thick Holocene fill consisting mainly of silt and clay varves. These sediments were carried into the lake by proglacial Bowser River which drains a high-energy, heavily glacierized basin. Sedimentation in the lake is controlled by seasonal snow and ice melt, by autumn rainstorms, and by rare, but very large jökulhlaups from glacier-dammed lakes in the upper Bowser River basin which complicate environmental inferences from the sedimentary record. Sediment is dispersed through the deep western part of the lake by energetic turbidity currents. The turbidity currents apparently do not overtop a sill that separates the western basin from much shallower areas to the east. Large amounts of silt and clay are deposited from suspension in the eastern part of the lake, but sediment accumulation rates there are much lower than to the west. Several strong acoustic reflectors punctuate the varved fill in the western basin; these may be thick or relatively coarse beds deposited during jökulhlaups or exceptionally large storms. The contemporary sediment yield to Bowser Lake, estimated from sediments in the lake, is about 360 t km^-2a^-1. This is a relatively high value, but it is less than yields insome other, similar montane basins with extensive snow and ice cover.The most likely explanation for the difference is that large amounts of sediment have been, and continue to be, stored on the Bowser delta andin small proglacial lakes.     

Inferring the relative measure of principal stress components

The phase velocity and the attenuation coefficient of compressional seismic waves, propagating in poroelastic, fluid-saturated, laminated sediments, are computed analytically from first principles. The wavefield is found to be strongly affected by the medium heterogeneity. Impedance fluctuations lead to poroelastic scattering; variations of the layer compressibilities cause inter-layer flow (a 1-D macroscopic local flow). These effects result in significant attenuation and dispersion of the seismic wavefield, even in the surface seismic frequency range, 10–100 Hz. The various attenuation mechanisms are found to be approximately additive, dominated by inter-layer flow at very low frequencies. Elastic scattering is important over a broad frequency range from seismic to sonic frequencies. Biot's global flow (the relative displacement of solid frame and fluid) contributes mainly in the range of ultrasonic frequencies. From the seismic frequency range up to ultrasonic frequencies, attenuation due to heterogeneity is strongly enhanced compared to homogeneous Biot models. Simple analytical expressions for the P -wave phase velocity and attenuation coefficient are presented as functions of frequency and of statistical medium parameters (correlation lengths, variances). These results automatically include different asymptotic approximations, such as poroelastic Backus averaging in the quasi-static and the no-flow limits, geometrical optics, and intermediate frequency ranges.     

Secondary ferrimagnetic minerals in Welsh soils: a comparison of mineral magnetic detection methods and implications for mineral formation

A study of mineral magnetic parameters was carried out on a Late Pleistocene and Holocene sedimentary sequence (of nearly 18 m) from Lake Bledowo (central Poland). Sediments of Lake Bledowo have already been analysed for bulk sediment mineralogy and biogenic materials. The mineral magnetic stratigraphy confirms the major changes in palaeo-environmental conditions that have been deduced from other methods. The most important mineral magnetic change results from the authigenetic formation of ferrimagnetic greigite, Fe₃S₄, during the beginning of lacustrine conditions (± 12 000 yr BP). Our data also indicate a detrital origin of overlying ferrimagnetic iron oxides. It is suggested that they originate from brown soils developed on the boulder clay constituting the west side of the lake shore. Variations of ferrimagnetic iron oxide size are related to the early diagenetic processes in the sediment. Larger particles are present in periods with early diagenesis of organic matter in anoxic conditions. This indicates the dissolution of fine magnetic particles by iron-oxide-reducing bacteria and results in homogeneous magnetic grain sizes, despite their origin from soils, characterized by a multimodal grain-size distribution.     

Effect of environmental factors on the flora of alluvial fans in southern Sinai

The purpose of this study was to elucidate the floristic and structural characteristics of simple alluvial fan vegetation of southern Sinai and to relate them to environmental variation. The main question addressed was: how does the floristic composition of fan habitats, species richness and life-form vary in relation to environmental change? Thirty-seven alluvial fans, randomly selected in two mainwadis(WadiFeiran andWadiDahab) were analysed quantitively. Two-way Indicator Species Analysis (TWINSPAN) classification and Canonical Correspondence Analysis (CCA) were applied in successive stages of the data analysis to describe vegetational variation in relation to physical gradients. Seven main clusters of fans were defined on the basis of environmental variation. These clusters are divided into three main groups of species richness. Species richness varied along a moisture gradient. The richest fans were the driest habitats, indicating that maximum species richness did not occur at high moisture availability. The moisture gradient is a complex gradient correlated with elevation, slope, climatic aridity, soil texture and the nature of the soil surface. Fine sand, silt plus clay and calcium carbonate showed significant differences between the internal groups and subgroups of the first and second level of the TWINSPAN classification.     

Pore-water response on seasonal environmental changes in intertidal sediments of the Weser Estuary,Germany

In order to determine time-dependent changes in estuarine pore-water chemistry and flux variations across the sediment-water interface, sediment cores of an intertidal mud flat in the Weser Estuary were taken monthly over a one-year period. Sediment temperature, pH, Eh, Cl^–, O₂, NO ₃ ^– , and SO ₄ ^2– pore-water concentrations were measured and showed variations that relate to the changes of surface temperature and estuarine water composition. Fick's first law was applied to quantify diffusive fluxes from concentration gradients in the diffusive boundary layer and in the pore water. Total nitrate fluxes were calculated from flux chamber experiments. Diffusive oxygen fluxes increased from 5 mmol m^–2 d^–1 in winter to 18 mmol m^–2 d^–1 in early summer, while nitrate fluxes into the sediment increased from 3 mmol m^–2 d^–1 in winter to 60 mmol m^–2 d^–1 in early summer. Oxygen and nitrate fluxes into the sediment correlated linearly to sediment temperature. Sulfate fluxes increased from 0.5 mmol m^–2 d^–1 in winter to 10 mmol m^–2 d^–1 in August and September. Converted into carbon fluxes, the sum of these oxidants ranged from 10 mmol m^–2 d^–1 in winter to 80 mmol m^–2 d^–1 in summer. An estimation of the upper limit of the annual nitrate flux into the sediment showed that about 10% of the 250,000 t of nitrate discharged annually by the river may be decomposed within the inner Weser Estuary.     

民和盆地上侏罗统湿型冲积扇沉积

本文通过岩相特征、粘土矿物分布、早期成岩矿物组合、微量元素等特征的综合分析，认为民和盆地上侏罗统下部为一较典型的湿型冲积扇沉积。冲积扇扇中发育河道冲刷充填和漫流沉积，而泥石流不发育。沉积层序与现代湿型冲积扇可对比。扇体中粘土岩及早期成岩矿物组合中富含高岭石，应与扇体发育时的潮湿气候和弱酸性流体的较强的淋滤有关。由粘土岩中微量元素因子分析进一步表明，该地层中富硼、钒的特征与相邻非扇相地层明显不同     

武宁陆相红盆沉积特征与演化浅析

本文依据1:5万区调资料,扼要介绍了武宁陆相红盆填图单位的拟定、表示方法及工作原理的应用,重点叙述了红盆内多个冲积扇体特征及其之间的叠覆关系,阐明了盆缘断裂是控制红盆成生、发展演化的主导因素。对红盆成生及演化、时代也作了初步探讨。