宜昌砾石层的沉积环境及地貌意义

宜昌砾石层上覆中更新世网纹红土,下伏白垩纪红层,共有22个岩性层组成,总厚超过100m。通过对宜昌地区剖面出露砾石层的沉积相分析表明,善溪窑和云池剖面由下至上出现冲积扇扇中-扇根亚相;李家院剖面与上述两剖面间有沉积间断,由下至上出现冲积扇扇端-扇中亚相。粒度分析也证明了该砾石层中的砂体属冲积扇中的辫状水道沉积,与沉积相分析所得结论一致。研究认为,宜昌砾石层具有典型的冲积扇沉积环境特征,主要为冲积扇扇顶部分。该冲积扇在宜昌东南地区如此大规模的发育,显示其形成时具有强大的水动力条件,通过对其形成的地貌环境意义进行探讨,初步认为,该冲积扇为长江三峡贯通的产物。据前人研究推断,宜昌砾石层的形成时代应该在1.08～0.73MaB.P.,三峡贯通应在1.0MaB.P.之前。     

赣东北鹅湖岭组的再认识

在分析赣东北鹅湖岭组及有关地层的地质特征、地层划分现状及产生分岐的原因的基础上,提出以岩性、岩相为划分依据,将鹅湖岭组与喷发相相对应,将其下界、上界分别置于沉积喷发相与喷发相、喷发相与喷发沉积相的相变界面上。从而将北京地质学院指定的打鼓顶组建组剖面上的"打鼓顶组"并入鹅湖岭组;将赣东北其它地区的鹅湖岭组下界由安山岩层顶界处上移至安山岩层之上灰绿色砂岩层的顶界处,将铅山一上饶一带鹅湖岭组上界下移至原鹅湖岭组上部的底界处。     

海州式磷矿床地质特征及其成矿模式

海州式磷矿成矿物质有多种来源。磷元素在地壳发展过程中，随着磷矿成矿作用不同阶段物化条件等改变而变化，将成矿划分为沉积、变质及改造三阶段。中元古代早期海州群锦屏组，肥东群双山 ，宿松群柳坪组和虎踏石组及红安群七角山组下段为其“源”，磷块岩形成后，由于变质、混合岩化交代和风化淋滤作用，使磷质活化，在一定的空间富集成矿。     

Early Devonian synorogenic alluvial-fan deposits of the Maccullochs Range,western New South Wales

The Early Devonian, Maccullochs Range beds (new) of the Winduck Interval largely comprise non-marine fine-grained sheet-flood-deposited sandstones which lie in the southeast sector of the Darling Basin Conjugate Fault System. Deposition of the >2.5 km-thick sequence occurred on the Wilcannia, Towers and Coolabah Bore alluvial fans, that were sourced largely from lightly indurated sandstone caps overlying a large basement high lying north of the Darling River Lineament, and also from west of Maccullochs Range (Coolabah Bore Fan). Four lithofacies are recognised. Lithofacies 1, massive sandstone, is proximal and was deposited from hyperconcentrated sheet floods. The more distal lithofacies 2 is partly massive, partly laminated and partly affected by soft sediment slumping during its deposition. It contains 1.3 – 3.5 m-thick sheet-flood successions that rarely show cross-bedding. Lithofacies 3 and 4 are minor: lithofacies 3, stream-flood deposited, comprises coarse-grained, pebbly sandstone and lithofacies 4, transient playa lake deposits that are locally intercalated with lithofacies 2. In lithofacies 2, thick massive fine-grained sandstone is commonly overlain by laminated sandstone that was deformed when soft. Incised channel deposits in lithofacies 2 deposits are rare and palaeosols were not discovered. Permanency of the positions of two of the alluvial fans, and by inference their feeder streams, remained unchanged for ～9 million years. The fans overlie probable floodplain deposits observed in a quarry in the easternmost part of the study area. Marine fossils are very minor in the range—the brachiopod Howellella jaqueti at one locality indicates an Early Devonian age for one of the brief marine incursions into what was normally an alluvial-fan environment. Very brief marine incursions elsewhere in the group are deduced from the presence of very rare fossil gastropods.     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

Complex site effects and building codes: Making the leap

The engineering community is aware of the importance of site effects, but it lags behind seismological studies when it comes to incorporating site effect considerations in design spectra for seismic norms. This lag is reflected in the conspicuous fact that current building codes make allowance for 1D site effects but ignore complex site effects. The purpose of this paper is to explore a way for including complex site effects in a building code environment. We take as example Eurocode 8, which is a modern code that exemplifies the current approach to site effect consideration. We examine the restrictions that we have imposed to make the problem of a feasible size and discuss the approach we have taken. We propose a strategy to incorporate a class of complex site effects in a design elastic spectrum.     

是地层单元还是构造单元？

古大陆边缘变质地质体性质的确定对于探讨大地构造演化具有十分重要的意义。由于后期变形变质作用的影响,原先不同的构造单元往往被改造成看似完整的一套地层单元,但在同位素年龄、变质程度、岩浆活动与地层的专属组合及其空间延伸等方面则变化很大,这在华北古陆北缘的单塔子群和南缘的太华群中最为典型。因此,笔者建议用“构造－岩相杂岩体带”填图法来取代以地层为骨架的变质岩区地质制图,这有助于确定该地区的大地构造演化进程。     

高陂区童子岩组沉积与聚煤特征

从野外第一手资料入手,分析了本区的童子岩组第三段中亚段的沉积特征。在此基础上,归纳出本区主采煤层沉积环境,并研究了主采煤层的聚煤特征。     

Transformation of garnet epidote amphibolite to eclogite, western Dabie Mountains, China

Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H₂O, and Amp + Ab = Omp ± Czo + Qtz + H₂O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H₂O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.